This patch converts the Microchip I2SMCC bindings to DT schema format using json-schema. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx> --- Changes in v2: - moved from the beginning to the end of the patch series; - includes the changes (to yaml) from the rest of the patches that update the DT binding; .../bindings/sound/mchp,i2s-mcc.yaml | 108 ++++++++++++++++++ .../bindings/sound/mchp-i2s-mcc.txt | 49 -------- 2 files changed, 108 insertions(+), 49 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml delete mode 100644 Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml new file mode 100644 index 000000000000..0481315cb5f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip I2S Multi-Channel Controller + +maintainers: + - Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx> + +description: + The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and + supports a Time Division Multiplexed (TDM) interface with external + multi-channel audio codecs. It consists of a receiver, a transmitter and a + common clock generator that can be enabled separately to provide Adapter, + Client or Controller modes with receiver and/or transmitter active. + On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S + multi-channel is supported by using multiple data pins, output and + input, without TDM. + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + enum: + - microchip,sam9x60-i2smcc + - microchip,sama7g5-i2smcc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral Bus Clock + - description: Generic Clock (Optional). Should be set mostly when Master + Mode is required. + minItems: 1 + + clock-names: + items: + - const: pclk + - const: gclk + minItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + microchip,tdm-data-pair: + description: + Represents the DIN/DOUT pair pins that are used to receive/send + TDM data. It is optional and it is only needed if the controller + uses the TDM mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + default: 0 + +if: + properties: + compatible: + const: microchip,sam9x60-i2smcc +then: + properties: + microchip,tdm-data-pair: false + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2s@f001c000 { + #sound-dai-cells = <0>; + compatible = "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&i2s_clk>, <&i2s_gclk>; + clock-names = "pclk", "gclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + }; diff --git a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt deleted file mode 100644 index af8fe3e657df..000000000000 --- a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Microchip I2S Multi-Channel Controller - -Required properties: -- compatible: Should be "microchip,sam9x60-i2smcc" or - "microchip,sama7g5-i2smcc". -- reg: Should be the physical base address of the controller and the - length of memory mapped region. -- interrupts: Should contain the interrupt for the controller. -- dmas: Should be one per channel name listed in the dma-names property, - as described in atmel-dma.txt and dma.txt files. -- dma-names: Identifier string for each DMA request line in the dmas property. - Two dmas have to be defined, "tx" and "rx". -- clocks: Must contain an entry for each entry in clock-names. - Please refer to clock-bindings.txt. -- clock-names: Should be one of each entry matching the clocks phandles list: - - "pclk" (peripheral clock) Required. - - "gclk" (generated clock) Optional (1). - -Optional properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- princtrl-names: Should contain only one value - "default". -- microchip,tdm-data-pair: 8 bit value that represents the DIN/DOUT pair pins - which are used to receive/send TDM data. It is optional - and it is only needed if the controller uses the TDM - mode. Not available for "microchip,sam9x60-i2smcc" - compatible. If it's not present, the default value is 0, - so the DIN/DOUT 0 pins are used. - -(1) : Only the peripheral clock is required. The generated clock is optional - and should be set mostly when Master Mode is required. - -Example: - - i2s@f001c000 { - compatible = "microchip,sam9x60-i2smcc"; - reg = <0xf001c000 0x100>; - interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(36))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(37))>; - dma-names = "tx", "rx"; - clocks = <&i2s_clk>, <&i2s_gclk>; - clock-names = "pclk", "gclk"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s_default>; - }; -- 2.27.0