Takashi Iwai schrieb: > At Mon, 04 Feb 2008 15:31:10 +0100, > CAG wrote: >> hi, >> >> Takashi Iwai schrieb: >>> At Thu, 31 Jan 2008 23:51:19 +0100, >>> Computer AG im FSK wrote: >>>> Hi, >>>> >>>> I forget to mention that we patched >>>> /usr/local/src/alsa-driver-1.0.16rc2/alsa-kernel/pci/ice1712/revo.c >>>> instead of >>>> /usr/local/src/alsa-driver-1.0.16rc2/pci/ice1712/revo.c >>>> >>>> because /usr/local/src/alsa-driver-1.0.16rc2/pci/ice1712/revo.c is just >>>> 3 lines long or so and looks like including >>>> /usr/local/src/alsa-driver-1.0.16rc2/alsa-kernel/pci/ice1712/revo.c. >>>> >>>> Does this matter ? >>> No, it's the right place to apply. >>> >>> So far, I have no further idea what could be wrong. It's really hard >>> to debug remotely without hardware and without any datasheet... > >>> >>> Takashi >> We get this card working with O.S.S., recording works now. Anyway, OSS >> is not our preferred sound system... > > If the GPL'ed version of OSS works, then we can see the driver code. > Could you check whether it works? If we have a reference source, it > will be greatly helpful to debug. Ok, we will check this this week. I found a link to "Envy24 under FreeBSD", where details specs and the driver code are listed: http://envy24.svobodno.com/driver/envy24ht/ But I will get back to you as soon as we tested the GPL Version. > >> We would like to know if there will be future development for this card. >> We bought 4 cards for our studio, it really would help us out. >> >> Is there any way to support the alsa project to fix this issue ? What >> about our offer to lend a card for development ? Our finances aren't >> very well but we could also think about a small donation for hardware >> i.e. > > Well, the problem is another one - the lack of the hardware > information such as datasheet. The codec chip itself is known but the > connection of the chip is unknown. This is what M-audio knows at > best. Or you can track the pin connections on your board... > > Above all, the most missing thing for me is the time. I'm willing to > help you but have likely too little time. I hope someone else could > help more intensively... Well I can imagine... :) Toast > > > Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
