Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.
Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index f289ec8563a1..148b7b1bd3e8 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
BYT_RT5651_SSP0_AIF1 |
BYT_RT5651_MONO_SPEAKER),
},
+ {
+ /* Jumper EZpad 7 */
+ .callback = byt_rt5651_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+ /* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+ DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+ },
+ .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+ BYT_RT5651_IN2_MAP |
+ BYT_RT5651_JD_NOT_INV),
+ },
{
/* KIANO SlimNote 14.2 */
.callback = byt_rt5651_quirk_cb,
--
2.30.1
