The RT5670_L_MUTE_SFT and RT5670_R_MUTE_SFT bits (bits 15 and 7) of the
RT5670_HP_VOL register are set / unset by the headphones deplop code
run by rt5670_hp_event() on SND_SOC_DAPM_POST_PMU / SND_SOC_DAPM_PRE_PMD.
So we should not also export a control to userspace which toggles these
same bits.
This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there do not
use the "HP Playback Switch" control.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/codecs/rt5670.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index b13d9e0e0e61..0f372a748b0e 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -631,8 +631,6 @@ static SOC_ENUM_SINGLE_DECL(rt5670_if2_adc_enum, RT5670_DIG_INF1_DATA,
static const struct snd_kcontrol_new rt5670_snd_controls[] = {
/* Headphone Output Volume */
- SOC_DOUBLE("HP Playback Switch", RT5670_HP_VOL,
- RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1),
SOC_DOUBLE_TLV("HP Playback Volume", RT5670_HP_VOL,
RT5670_L_VOL_SFT, RT5670_R_VOL_SFT,
39, 1, out_vol_tlv),
--
2.30.1
