UCM needs to know which microphone is used (dmic or RT715-based), let's add the information in the component string. Note the slight change from HDAudio platforms where 'cfg-dmics' was used. 'cfg-mics' is used here with the intent that this component string describes either the number of PCH-attached microphones or the number of RT715-attached ones (the assumption is that the two configurations are mutually exclusive). Suggested-by: Jaroslav Kysela <perex@xxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxx> Reviewed-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx> --- sound/soc/intel/boards/sof_sdw.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 0e83db947a57..d1251a6ac3af 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -1222,6 +1222,15 @@ static int mc_probe(struct platform_device *pdev) if (!card->components) return -ENOMEM; + if (mach->mach_params.dmic_num) { + card->components = devm_kasprintf(card->dev, GFP_KERNEL, + "%s mic:dmic cfg-mics:%d", + card->components, + mach->mach_params.dmic_num); + if (!card->components) + return -ENOMEM; + } + card->long_name = sdw_card_long_name; /* Register the card */ -- 2.25.1