At Thu, 31 Jan 2008 13:59:57 -0500, Matthew R. Hurne wrote: > > Tobin Davis wrote: > > Sorry for not getting back sooner. Could you try alsa-1.0.16rc2 with > > the following configuration: > > > > ./configure --with-cards=hda-intel --with-debug=detect && make && > > sudo make install > > > > After it is installed, type "dmesg" and look for the alsa output > > (line-outs, speakers, etc). Copy that into an email and send it to me, > > please. > > > > Tobin > > > > > No worries about not getting back sooner - I appreciate you getting back at all! > > I've done as you requested, and here is the output of dmesg: > > ALSA /root/alsa-driver-1.0.16rc2/alsa-kernel/pci/hda/hda_intel.c:1788: chipset global capabilities = 0x4401 > ALSA /root/alsa-driver-1.0.16rc2/alsa-kernel/pci/hda/hda_intel.c:740: codec_mask = 0x1 > hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... > ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2863: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) > ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2867: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2871: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) > ALSA /root/alsa-driver-1.0.16rc2/pci/hda/hda_codec.c:2872: mono: mono_out=0x0 As you see, there is no speaker output defined in the pin default config which is set by BIOS. If you don't get any sound with model=basic even after unmuting/adjusting Front, Headphone and Mono volumes/switches, then the problem is likely a missing EAPD via COEF comands... Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
