Hi, On Thu, Jan 28, 2021 at 01:45:15PM -0600, Rob Herring wrote: > Properties with standard unit suffixes already have a type and don't need > type definitions. They also default to a single entry, so 'maxItems: 1' > can be dropped. > > adi,ad5758 is an oddball which defined an enum of arrays. While a valid > schema, it is simpler as a whole to only define scalar constraints. > > Cc: Jean Delvare <jdelvare@xxxxxxxx> > Cc: Guenter Roeck <linux@xxxxxxxxxxxx> > Cc: Jonathan Cameron <jic23@xxxxxxxxxx> > Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> > Cc: Alexandre Torgue <alexandre.torgue@xxxxxx> > Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx> > Cc: "David S. Miller" <davem@xxxxxxxxxxxxx> > Cc: Jakub Kicinski <kuba@xxxxxxxxxx> > Cc: Sebastian Reichel <sre@xxxxxxxxxx> > Cc: Mark Brown <broonie@xxxxxxxxxx> > Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > Cc: Serge Semin <fancer.lancer@xxxxxxxxx> > Cc: Wolfram Sang <wolfram@xxxxxxxxxxxxx> > Cc: linux-hwmon@xxxxxxxxxxxxxxx > Cc: linux-i2c@xxxxxxxxxxxxxxx > Cc: linux-iio@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-input@xxxxxxxxxxxxxxx > Cc: linux-mmc@xxxxxxxxxxxxxxx > Cc: netdev@xxxxxxxxxxxxxxx > Cc: linux-pm@xxxxxxxxxxxxxxx > Cc: linux-rtc@xxxxxxxxxxxxxxx > Cc: linux-serial@xxxxxxxxxxxxxxx > Cc: alsa-devel@xxxxxxxxxxxxxxxx > Cc: linux-watchdog@xxxxxxxxxxxxxxx > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../devicetree/bindings/arm/cpus.yaml | 1 - > .../bindings/extcon/wlf,arizona.yaml | 1 - > .../bindings/hwmon/adi,ltc2947.yaml | 1 - > .../bindings/hwmon/baikal,bt1-pvt.yaml | 8 ++-- > .../devicetree/bindings/hwmon/ti,tmp513.yaml | 1 - > .../devicetree/bindings/i2c/i2c-gpio.yaml | 2 - > .../bindings/i2c/snps,designware-i2c.yaml | 3 -- > .../bindings/iio/adc/maxim,max9611.yaml | 1 - > .../bindings/iio/adc/st,stm32-adc.yaml | 1 - > .../bindings/iio/adc/ti,palmas-gpadc.yaml | 2 - > .../bindings/iio/dac/adi,ad5758.yaml | 41 ++++++++++++------- > .../bindings/iio/health/maxim,max30100.yaml | 1 - > .../input/touchscreen/touchscreen.yaml | 2 - > .../bindings/mmc/mmc-controller.yaml | 1 - > .../bindings/mmc/mmc-pwrseq-simple.yaml | 2 - > .../bindings/net/ethernet-controller.yaml | 2 - > .../devicetree/bindings/net/snps,dwmac.yaml | 1 - > .../bindings/power/supply/battery.yaml | 3 -- > .../bindings/power/supply/bq2515x.yaml | 1 - > .../bindings/regulator/dlg,da9121.yaml | 1 - > .../bindings/regulator/fixed-regulator.yaml | 2 - > .../devicetree/bindings/rtc/rtc.yaml | 2 - > .../devicetree/bindings/serial/pl011.yaml | 2 - > .../devicetree/bindings/sound/sgtl5000.yaml | 2 - > .../bindings/watchdog/watchdog.yaml | 1 - > 25 files changed, 29 insertions(+), 56 deletions(-) Acked-by: Sebastian Reichel <sre@xxxxxxxxxx> # for power-supply -- Sebastian > > diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml > index 14cd727d3c4b..f02fd10de604 100644 > --- a/Documentation/devicetree/bindings/arm/cpus.yaml > +++ b/Documentation/devicetree/bindings/arm/cpus.yaml > @@ -232,7 +232,6 @@ properties: > by this cpu (see ./idle-states.yaml). > > capacity-dmips-mhz: > - $ref: '/schemas/types.yaml#/definitions/uint32' > description: > u32 value representing CPU capacity (see ./cpu-capacity.txt) in > DMIPS/MHz, relative to highest capacity-dmips-mhz > diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > index 5fe784f487c5..efdf59abb2e1 100644 > --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > @@ -85,7 +85,6 @@ properties: > wlf,micd-timeout-ms: > description: > Timeout for microphone detection, specified in milliseconds. > - $ref: "/schemas/types.yaml#/definitions/uint32" > > wlf,micd-force-micbias: > description: > diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > index eef614962b10..bf04151b63d2 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > @@ -49,7 +49,6 @@ properties: > description: > This property controls the Accumulation Dead band which allows to set the > level of current below which no accumulation takes place. > - $ref: /schemas/types.yaml#/definitions/uint32 > maximum: 255 > default: 0 > > diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml > index 00a6511354e6..5d3ce641fcde 100644 > --- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml > +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml > @@ -73,11 +73,9 @@ properties: > description: | > Temperature sensor trimming factor. It can be used to manually adjust the > temperature measurements within 7.130 degrees Celsius. > - maxItems: 1 > - items: > - default: 0 > - minimum: 0 > - maximum: 7130 > + default: 0 > + minimum: 0 > + maximum: 7130 > > additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml > index 8020d739a078..1502b22c77cc 100644 > --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml > +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml > @@ -52,7 +52,6 @@ properties: > ti,bus-range-microvolt: > description: | > This is the operating range of the bus voltage in microvolt > - $ref: /schemas/types.yaml#/definitions/uint32 > enum: [16000000, 32000000] > default: 32000000 > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml > index cc3aa2a5e70b..ff99344788ab 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml > +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml > @@ -39,11 +39,9 @@ properties: > > i2c-gpio,delay-us: > description: delay between GPIO operations (may depend on each platform) > - $ref: /schemas/types.yaml#/definitions/uint32 > > i2c-gpio,timeout-ms: > description: timeout to get data > - $ref: /schemas/types.yaml#/definitions/uint32 > > # Deprecated properties, do not use in new device tree sources: > gpios: > diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > index c22b66b6219e..d9293c57f573 100644 > --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml > @@ -66,21 +66,18 @@ properties: > default: 400000 > > i2c-sda-hold-time-ns: > - maxItems: 1 > description: | > The property should contain the SDA hold time in nanoseconds. This option > is only supported in hardware blocks version 1.11a or newer or on > Microsemi SoCs. > > i2c-scl-falling-time-ns: > - maxItems: 1 > description: | > The property should contain the SCL falling time in nanoseconds. > This value is used to compute the tLOW period. > default: 300 > > i2c-sda-falling-time-ns: > - maxItems: 1 > description: | > The property should contain the SDA falling time in nanoseconds. > This value is used to compute the tHIGH period. > diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml > index 9475a9e6e920..95774a55629d 100644 > --- a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml > @@ -23,7 +23,6 @@ properties: > maxItems: 1 > > shunt-resistor-micro-ohms: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: | > Value in micro Ohms of the shunt resistor connected between the RS+ and > RS- inputs, across which the current is measured. Value needed to compute > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml > index 6364ede9bb5f..a58334c3bb76 100644 > --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml > @@ -248,7 +248,6 @@ patternProperties: > Resolution (bits) to use for conversions: > - can be 6, 8, 10 or 12 on stm32f4 > - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 > - $ref: /schemas/types.yaml#/definitions/uint32 > > st,adc-channels: > description: | > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml > index 692dacd0fee5..7b895784e008 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml > @@ -42,7 +42,6 @@ properties: > const: 1 > > ti,channel0-current-microamp: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: Channel 0 current in uA. > enum: > - 0 > @@ -51,7 +50,6 @@ properties: > - 20 > > ti,channel3-current-microamp: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: Channel 3 current in uA. > enum: > - 0 > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml > index 626ccb6fe21e..fd4edca34a28 100644 > --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml > @@ -46,31 +46,42 @@ properties: > two properties must be present: > > adi,range-microvolt: > - $ref: /schemas/types.yaml#/definitions/int32-array > description: | > Voltage output range specified as <minimum, maximum> > - enum: > - - [[0, 5000000]] > - - [[0, 10000000]] > - - [[-5000000, 5000000]] > - - [[-10000000, 10000000]] > + oneOf: > + - items: > + - const: 0 > + - enum: [5000000, 10000000] > + - items: > + - const: -5000000 > + - const: 5000000 > + - items: > + - const: -10000000 > + - const: 10000000 > > adi,range-microamp: > - $ref: /schemas/types.yaml#/definitions/int32-array > description: | > Current output range specified as <minimum, maximum> > - enum: > - - [[0, 20000]] > - - [[0, 24000]] > - - [[4, 24000]] > - - [[-20000, 20000]] > - - [[-24000, 24000]] > - - [[-1000, 22000]] > + oneOf: > + - items: > + - const: 0 > + - enum: [20000, 24000] > + - items: > + - const: 4 > + - const: 24000 > + - items: > + - const: -20000 > + - const: 20000 > + - items: > + - const: -24000 > + - const: 24000 > + - items: > + - const: -1000 > + - const: 22000 > > reset-gpios: true > > adi,dc-dc-ilim-microamp: > - $ref: /schemas/types.yaml#/definitions/uint32 > enum: [150000, 200000, 250000, 300000, 350000, 400000] > description: | > The dc-to-dc converter current limit. > diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml > index 64b862637039..967778fb0ce8 100644 > --- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml > +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml > @@ -21,7 +21,6 @@ properties: > description: Connected to ADC_RDY pin. > > maxim,led-current-microamp: > - $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 2 > maxItems: 2 > description: | > diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > index a771a15f053f..046ace461cc9 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > @@ -70,11 +70,9 @@ properties: > > touchscreen-x-mm: > description: horizontal length in mm of the touchscreen > - $ref: /schemas/types.yaml#/definitions/uint32 > > touchscreen-y-mm: > description: vertical length in mm of the touchscreen > - $ref: /schemas/types.yaml#/definitions/uint32 > > dependencies: > touchscreen-size-x: [ touchscreen-size-y ] > diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > index df4ee4c778ae..e141330c1114 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > @@ -261,7 +261,6 @@ properties: > waiting for I/O signalling and card power supply to be stable, > regardless of whether pwrseq-simple is used. Default to 10ms if > no available. > - $ref: /schemas/types.yaml#/definitions/uint32 > default: 10 > > supports-cqe: > diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > index 6cd57863c1db..226fb191913d 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml > @@ -41,13 +41,11 @@ properties: > description: > Delay in ms after powering the card and de-asserting the > reset-gpios (if any). > - $ref: /schemas/types.yaml#/definitions/uint32 > > power-off-delay-us: > description: > Delay in us after asserting the reset-gpios (if any) > during power off of the card. > - $ref: /schemas/types.yaml#/definitions/uint32 > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > index 0965f6515f9e..dac4aadb6e2e 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > @@ -122,7 +122,6 @@ properties: > such as flow control thresholds. > > rx-internal-delay-ps: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: | > RGMII Receive Clock Delay defined in pico seconds. > This is used for controllers that have configurable RX internal delays. > @@ -140,7 +139,6 @@ properties: > is used for components that can have configurable fifo sizes. > > tx-internal-delay-ps: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: | > RGMII Transmit Clock Delay defined in pico seconds. > This is used for controllers that have configurable TX internal delays. > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > index b2f6083f556a..9ac77b8cb767 100644 > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > @@ -208,7 +208,6 @@ properties: > Triplet of delays. The 1st cell is reset pre-delay in micro > seconds. The 2nd cell is reset pulse in micro seconds. The 3rd > cell is reset post-delay in micro seconds. > - $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 3 > maxItems: 3 > > diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml > index 0c7e2e44793b..c3b4b7543591 100644 > --- a/Documentation/devicetree/bindings/power/supply/battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml > @@ -83,21 +83,18 @@ properties: > for each of the battery capacity lookup table. > > operating-range-celsius: > - $ref: /schemas/types.yaml#/definitions/uint32-array > description: operating temperature range of a battery > items: > - description: minimum temperature at which battery can operate > - description: maximum temperature at which battery can operate > > ambient-celsius: > - $ref: /schemas/types.yaml#/definitions/uint32-array > description: safe range of ambient temperature > items: > - description: alert when ambient temperature is lower than this value > - description: alert when ambient temperature is higher than this value > > alert-celsius: > - $ref: /schemas/types.yaml#/definitions/uint32-array > description: safe range of battery temperature > items: > - description: alert when battery temperature is lower than this value > diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml > index 75a56773be4a..813d6afde606 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml > @@ -50,7 +50,6 @@ properties: > maxItems: 1 > > input-current-limit-microamp: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: Maximum input current in micro Amps. > minimum: 50000 > maximum: 500000 > diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml > index 6f2164f7bc57..228018c87bea 100644 > --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml > +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml > @@ -62,7 +62,6 @@ properties: > description: IRQ line information. > > dlg,irq-polling-delay-passive-ms: > - $ref: "/schemas/types.yaml#/definitions/uint32" > minimum: 1000 > maximum: 10000 > description: | > diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml > index d3d0dc13dd8b..8850c01bd470 100644 > --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml > @@ -72,11 +72,9 @@ properties: > > startup-delay-us: > description: startup time in microseconds > - $ref: /schemas/types.yaml#/definitions/uint32 > > off-on-delay-us: > description: off delay time in microseconds > - $ref: /schemas/types.yaml#/definitions/uint32 > > enable-active-high: > description: > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml > index d30dc045aac6..0ec3551f12dd 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml > @@ -27,7 +27,6 @@ properties: > 1: chargeable > > quartz-load-femtofarads: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: > The capacitive load of the quartz(x-tal), expressed in femto > Farad (fF). The default value shall be listed (if optional), > @@ -47,7 +46,6 @@ properties: > deprecated: true > > trickle-resistor-ohms: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: > Selected resistor for trickle charger. Should be given > if trickle charger should be enabled. > diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml > index c23c93b400f0..07fa6d26f2b4 100644 > --- a/Documentation/devicetree/bindings/serial/pl011.yaml > +++ b/Documentation/devicetree/bindings/serial/pl011.yaml > @@ -88,14 +88,12 @@ properties: > description: > Rate at which poll occurs when auto-poll is set. > default 100ms. > - $ref: /schemas/types.yaml#/definitions/uint32 > default: 100 > > poll-timeout-ms: > description: > Poll timeout when auto-poll is set, default > 3000ms. > - $ref: /schemas/types.yaml#/definitions/uint32 > default: 3000 > > required: > diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml > index d116c174b545..70b4a8831073 100644 > --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml > +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml > @@ -41,14 +41,12 @@ properties: > values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not > mentioned or if the value is unknown, then micbias resistor is set to > 4k. > - $ref: "/schemas/types.yaml#/definitions/uint32" > enum: [ 0, 2, 4, 8 ] > > micbias-voltage-m-volts: > description: The bias voltage to be used in mVolts. The voltage can take > values from 1.25V to 3V by 250mV steps. If this node is not mentioned > or the value is unknown, then the value is set to 1.25V. > - $ref: "/schemas/types.yaml#/definitions/uint32" > enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] > > lrclk-strength: > diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml > index 4e2c26cd981d..e3dfb02f0ca5 100644 > --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml > +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml > @@ -19,7 +19,6 @@ properties: > pattern: "^watchdog(@.*|-[0-9a-f])?$" > > timeout-sec: > - $ref: /schemas/types.yaml#/definitions/uint32 > description: > Contains the watchdog timeout in seconds. > > -- > 2.27.0 >
Attachment:
signature.asc
Description: PGP signature
