On 15-01-21, 13:37, Bard Liao wrote: > The existing code reports a NAK only when ACK=0 > This is not aligned with the SoundWire 1.x specifications. > > Table 32 in the SoundWire 1.2 specification shows that a Device shall > not set NAK=1 if ACK=1. But Table 33 shows the Combined Response > may very well be NAK=1/ACK=1, e.g. if another Device than the one > addressed reports a parity error. > > NAK=1 signals a 'Command_Aborted', regardless of the ACK bit value. > > Move the tests for NAK so that the NAK=1/ACK=1 combination is properly > detected according to the specification. > > Also, improve the demesg log to get more information for debugging. Applied, thanks -- ~Vinod