[PATCH v2 02/12] ASoC: arizona-jack: Add arizona-jack.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add an unmodified copy of drivers/extcon/extcon-arizona.c as
sound/soc/codecs/arizona-jack.c .

This is a preparation patch for converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 sound/soc/codecs/arizona-jack.c | 1816 +++++++++++++++++++++++++++++++
 1 file changed, 1816 insertions(+)
 create mode 100644 sound/soc/codecs/arizona-jack.c

diff --git a/sound/soc/codecs/arizona-jack.c b/sound/soc/codecs/arizona-jack.c
new file mode 100644
index 000000000000..aae82db542a5
--- /dev/null
+++ b/sound/soc/codecs/arizona-jack.c
@@ -0,0 +1,1816 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * extcon-arizona.c - Extcon driver Wolfson Arizona devices
+ *
+ *  Copyright (C) 2012-2014 Wolfson Microelectronics plc
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/extcon-provider.h>
+
+#include <sound/soc.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+#include <dt-bindings/mfd/arizona.h>
+
+#define ARIZONA_MAX_MICD_RANGE 8
+
+#define ARIZONA_MICD_CLAMP_MODE_JDL      0x4
+#define ARIZONA_MICD_CLAMP_MODE_JDH      0x5
+#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
+#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb
+
+#define ARIZONA_TST_CAP_DEFAULT 0x3
+#define ARIZONA_TST_CAP_CLAMP   0x1
+
+#define ARIZONA_HPDET_MAX 10000
+
+#define HPDET_DEBOUNCE 500
+#define DEFAULT_MICD_TIMEOUT 2000
+
+#define ARIZONA_HPDET_WAIT_COUNT 15
+#define ARIZONA_HPDET_WAIT_DELAY_MS 20
+
+#define QUICK_HEADPHONE_MAX_OHM 3
+#define MICROPHONE_MIN_OHM      1257
+#define MICROPHONE_MAX_OHM      30000
+
+#define MICD_DBTIME_TWO_READINGS 2
+#define MICD_DBTIME_FOUR_READINGS 4
+
+#define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \
+			 ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \
+			 ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \
+			 ARIZONA_MICD_LVL_7)
+
+#define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7)
+
+#define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8)
+
+struct arizona_extcon_info {
+	struct device *dev;
+	struct arizona *arizona;
+	struct mutex lock;
+	struct regulator *micvdd;
+	struct input_dev *input;
+
+	u16 last_jackdet;
+
+	int micd_mode;
+	const struct arizona_micd_config *micd_modes;
+	int micd_num_modes;
+
+	const struct arizona_micd_range *micd_ranges;
+	int num_micd_ranges;
+
+	bool micd_reva;
+	bool micd_clamp;
+
+	struct delayed_work hpdet_work;
+	struct delayed_work micd_detect_work;
+	struct delayed_work micd_timeout_work;
+
+	bool hpdet_active;
+	bool hpdet_done;
+	bool hpdet_retried;
+
+	int num_hpdet_res;
+	unsigned int hpdet_res[3];
+
+	bool mic;
+	bool detecting;
+	int jack_flips;
+
+	int hpdet_ip_version;
+
+	struct extcon_dev *edev;
+
+	struct gpio_desc *micd_pol_gpio;
+};
+
+static const struct arizona_micd_config micd_default_modes[] = {
+	{ ARIZONA_ACCDET_SRC, 1, 0 },
+	{ 0,                  2, 1 },
+};
+
+static const struct arizona_micd_range micd_default_ranges[] = {
+	{ .max =  11, .key = BTN_0 },
+	{ .max =  28, .key = BTN_1 },
+	{ .max =  54, .key = BTN_2 },
+	{ .max = 100, .key = BTN_3 },
+	{ .max = 186, .key = BTN_4 },
+	{ .max = 430, .key = BTN_5 },
+};
+
+/* The number of levels in arizona_micd_levels valid for button thresholds */
+#define ARIZONA_NUM_MICD_BUTTON_LEVELS 64
+
+static const int arizona_micd_levels[] = {
+	3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46,
+	49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100,
+	105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245,
+	270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071,
+	1257, 30000,
+};
+
+static const unsigned int arizona_cable[] = {
+	EXTCON_MECHANICAL,
+	EXTCON_JACK_MICROPHONE,
+	EXTCON_JACK_HEADPHONE,
+	EXTCON_JACK_LINE_OUT,
+	EXTCON_NONE,
+};
+
+static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
+
+static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
+				    bool clamp)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int mask = 0, val = 0;
+	unsigned int cap_sel = 0;
+	int ret;
+
+	switch (arizona->type) {
+	case WM8998:
+	case WM1814:
+		mask = 0;
+		break;
+	case WM5110:
+	case WM8280:
+		mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
+		       ARIZONA_HP1L_SHRTI;
+		if (clamp) {
+			val = ARIZONA_HP1L_SHRTO;
+			cap_sel = ARIZONA_TST_CAP_CLAMP;
+		} else {
+			val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI;
+			cap_sel = ARIZONA_TST_CAP_DEFAULT;
+		}
+
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_HP_TEST_CTRL_1,
+					 ARIZONA_HP1_TST_CAP_SEL_MASK,
+					 cap_sel);
+		if (ret != 0)
+			dev_warn(arizona->dev,
+				 "Failed to set TST_CAP_SEL: %d\n", ret);
+		break;
+	default:
+		mask = ARIZONA_RMV_SHRT_HP1L;
+		if (clamp)
+			val = ARIZONA_RMV_SHRT_HP1L;
+		break;
+	}
+
+	snd_soc_dapm_mutex_lock(arizona->dapm);
+
+	arizona->hpdet_clamp = clamp;
+
+	/* Keep the HP output stages disabled while doing the clamp */
+	if (clamp) {
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_OUTPUT_ENABLES_1,
+					 ARIZONA_OUT1L_ENA |
+					 ARIZONA_OUT1R_ENA, 0);
+		if (ret != 0)
+			dev_warn(arizona->dev,
+				"Failed to disable headphone outputs: %d\n",
+				 ret);
+	}
+
+	if (mask) {
+		ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
+					 mask, val);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to do clamp: %d\n",
+				 ret);
+
+		ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
+					 mask, val);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to do clamp: %d\n",
+				 ret);
+	}
+
+	/* Restore the desired state while not doing the clamp */
+	if (!clamp) {
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_OUTPUT_ENABLES_1,
+					 ARIZONA_OUT1L_ENA |
+					 ARIZONA_OUT1R_ENA, arizona->hp_ena);
+		if (ret != 0)
+			dev_warn(arizona->dev,
+				 "Failed to restore headphone outputs: %d\n",
+				 ret);
+	}
+
+	snd_soc_dapm_mutex_unlock(arizona->dapm);
+}
+
+static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
+{
+	struct arizona *arizona = info->arizona;
+
+	mode %= info->micd_num_modes;
+
+	gpiod_set_value_cansleep(info->micd_pol_gpio,
+				 info->micd_modes[mode].gpio);
+
+	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+			   ARIZONA_MICD_BIAS_SRC_MASK,
+			   info->micd_modes[mode].bias <<
+			   ARIZONA_MICD_BIAS_SRC_SHIFT);
+	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
+
+	info->micd_mode = mode;
+
+	dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
+}
+
+static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
+{
+	switch (info->micd_modes[0].bias) {
+	case 1:
+		return "MICBIAS1";
+	case 2:
+		return "MICBIAS2";
+	case 3:
+		return "MICBIAS3";
+	default:
+		return "MICVDD";
+	}
+}
+
+static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	const char *widget = arizona_extcon_get_micbias(info);
+	struct snd_soc_dapm_context *dapm = arizona->dapm;
+	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm);
+	int ret;
+
+	ret = snd_soc_component_force_enable_pin(component, widget);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to enable %s: %d\n",
+			 widget, ret);
+
+	snd_soc_dapm_sync(dapm);
+
+	if (!arizona->pdata.micd_force_micbias) {
+		ret = snd_soc_component_disable_pin(component, widget);
+		if (ret != 0)
+			dev_warn(arizona->dev, "Failed to disable %s: %d\n",
+				 widget, ret);
+
+		snd_soc_dapm_sync(dapm);
+	}
+}
+
+static void arizona_start_mic(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	bool change;
+	int ret;
+	unsigned int mode;
+
+	/* Microphone detection can't use idle mode */
+	pm_runtime_get(info->dev);
+
+	if (info->detecting) {
+		ret = regulator_allow_bypass(info->micvdd, false);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to regulate MICVDD: %d\n",
+				ret);
+		}
+	}
+
+	ret = regulator_enable(info->micvdd);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
+			ret);
+	}
+
+	if (info->micd_reva) {
+		const struct reg_sequence reva[] = {
+			{ 0x80,  0x3 },
+			{ 0x294, 0x0 },
+			{ 0x80,  0x0 },
+		};
+
+		regmap_multi_reg_write(arizona->regmap, reva, ARRAY_SIZE(reva));
+	}
+
+	if (info->detecting && arizona->pdata.micd_software_compare)
+		mode = ARIZONA_ACCDET_MODE_ADC;
+	else
+		mode = ARIZONA_ACCDET_MODE_MIC;
+
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_MODE_MASK, mode);
+
+	arizona_extcon_pulse_micbias(info);
+
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
+				       &change);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to enable micd: %d\n", ret);
+	} else if (!change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_put_autosuspend(info->dev);
+	}
+}
+
+static void arizona_stop_mic(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	const char *widget = arizona_extcon_get_micbias(info);
+	struct snd_soc_dapm_context *dapm = arizona->dapm;
+	struct snd_soc_component *component = snd_soc_dapm_to_component(dapm);
+	bool change = false;
+	int ret;
+
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, 0,
+				       &change);
+	if (ret < 0)
+		dev_err(arizona->dev, "Failed to disable micd: %d\n", ret);
+
+	ret = snd_soc_component_disable_pin(component, widget);
+	if (ret != 0)
+		dev_warn(arizona->dev,
+			 "Failed to disable %s: %d\n",
+			 widget, ret);
+
+	snd_soc_dapm_sync(dapm);
+
+	if (info->micd_reva) {
+		const struct reg_sequence reva[] = {
+			{ 0x80,  0x3 },
+			{ 0x294, 0x2 },
+			{ 0x80,  0x0 },
+		};
+
+		regmap_multi_reg_write(arizona->regmap, reva, ARRAY_SIZE(reva));
+	}
+
+	ret = regulator_allow_bypass(info->micvdd, true);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
+			ret);
+	}
+
+	if (change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_mark_last_busy(info->dev);
+		pm_runtime_put_autosuspend(info->dev);
+	}
+}
+
+static struct {
+	unsigned int threshold;
+	unsigned int factor_a;
+	unsigned int factor_b;
+} arizona_hpdet_b_ranges[] = {
+	{ 100,  5528,   362464 },
+	{ 169, 11084,  6186851 },
+	{ 169, 11065, 65460395 },
+};
+
+#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb
+
+static struct {
+	int min;
+	int max;
+} arizona_hpdet_c_ranges[] = {
+	{ 0,       30 },
+	{ 8,      100 },
+	{ 100,   1000 },
+	{ 1000, 10000 },
+};
+
+static int arizona_hpdet_read(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int val, range;
+	int ret;
+
+	ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read HPDET status: %d\n",
+			ret);
+		return ret;
+	}
+
+	switch (info->hpdet_ip_version) {
+	case 0:
+		if (!(val & ARIZONA_HP_DONE)) {
+			dev_err(arizona->dev, "HPDET did not complete: %x\n",
+				val);
+			return -EAGAIN;
+		}
+
+		val &= ARIZONA_HP_LVL_MASK;
+		break;
+
+	case 1:
+		if (!(val & ARIZONA_HP_DONE_B)) {
+			dev_err(arizona->dev, "HPDET did not complete: %x\n",
+				val);
+			return -EAGAIN;
+		}
+
+		ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to read HP value: %d\n",
+				ret);
+			return -EAGAIN;
+		}
+
+		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+			    &range);
+		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
+			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
+
+		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
+		    (val < arizona_hpdet_b_ranges[range].threshold ||
+		     val >= ARIZONA_HPDET_B_RANGE_MAX)) {
+			range++;
+			dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
+				range);
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
+					   range <<
+					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+			return -EAGAIN;
+		}
+
+		/* If we go out of range report top of range */
+		if (val < arizona_hpdet_b_ranges[range].threshold ||
+		    val >= ARIZONA_HPDET_B_RANGE_MAX) {
+			dev_dbg(arizona->dev, "Measurement out of range\n");
+			return ARIZONA_HPDET_MAX;
+		}
+
+		dev_dbg(arizona->dev, "HPDET read %d in range %d\n",
+			val, range);
+
+		val = arizona_hpdet_b_ranges[range].factor_b
+			/ ((val * 100) -
+			   arizona_hpdet_b_ranges[range].factor_a);
+		break;
+
+	case 2:
+		if (!(val & ARIZONA_HP_DONE_B)) {
+			dev_err(arizona->dev, "HPDET did not complete: %x\n",
+				val);
+			return -EAGAIN;
+		}
+
+		val &= ARIZONA_HP_LVL_B_MASK;
+		/* Convert to ohms, the value is in 0.5 ohm increments */
+		val /= 2;
+
+		regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+			    &range);
+		range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
+			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
+
+		/* Skip up a range, or report? */
+		if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 &&
+		    (val >= arizona_hpdet_c_ranges[range].max)) {
+			range++;
+			dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
+				arizona_hpdet_c_ranges[range].min,
+				arizona_hpdet_c_ranges[range].max);
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_HEADPHONE_DETECT_1,
+					   ARIZONA_HP_IMPEDANCE_RANGE_MASK,
+					   range <<
+					   ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+			return -EAGAIN;
+		}
+
+		if (range && (val < arizona_hpdet_c_ranges[range].min)) {
+			dev_dbg(arizona->dev, "Reporting range boundary %d\n",
+				arizona_hpdet_c_ranges[range].min);
+			val = arizona_hpdet_c_ranges[range].min;
+		}
+		break;
+
+	default:
+		dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
+			 info->hpdet_ip_version);
+		return -EINVAL;
+	}
+
+	dev_dbg(arizona->dev, "HP impedance %d ohms\n", val);
+	return val;
+}
+
+static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
+			       bool *mic)
+{
+	struct arizona *arizona = info->arizona;
+	int id_gpio = arizona->pdata.hpdet_id_gpio;
+
+	if (!arizona->pdata.hpdet_acc_id)
+		return 0;
+
+	/*
+	 * If we're using HPDET for accessory identification we need
+	 * to take multiple measurements, step through them in sequence.
+	 */
+	info->hpdet_res[info->num_hpdet_res++] = *reading;
+
+	/* Only check the mic directly if we didn't already ID it */
+	if (id_gpio && info->num_hpdet_res == 1) {
+		dev_dbg(arizona->dev, "Measuring mic\n");
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_ACCESSORY_DETECT_MODE_1,
+				   ARIZONA_ACCDET_MODE_MASK |
+				   ARIZONA_ACCDET_SRC,
+				   ARIZONA_ACCDET_MODE_HPR |
+				   info->micd_modes[0].src);
+
+		gpio_set_value_cansleep(id_gpio, 1);
+
+		regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+				   ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+		return -EAGAIN;
+	}
+
+	/* OK, got both.  Now, compare... */
+	dev_dbg(arizona->dev, "HPDET measured %d %d\n",
+		info->hpdet_res[0], info->hpdet_res[1]);
+
+	/* Take the headphone impedance for the main report */
+	*reading = info->hpdet_res[0];
+
+	/* Sometimes we get false readings due to slow insert */
+	if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) {
+		dev_dbg(arizona->dev, "Retrying high impedance\n");
+		info->num_hpdet_res = 0;
+		info->hpdet_retried = true;
+		arizona_start_hpdet_acc_id(info);
+		pm_runtime_put(info->dev);
+		return -EAGAIN;
+	}
+
+	/*
+	 * If we measure the mic as high impedance
+	 */
+	if (!id_gpio || info->hpdet_res[1] > 50) {
+		dev_dbg(arizona->dev, "Detected mic\n");
+		*mic = true;
+		info->detecting = true;
+	} else {
+		dev_dbg(arizona->dev, "Detected headphone\n");
+	}
+
+	/* Make sure everything is reset back to the real polarity */
+	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_SRC, info->micd_modes[0].src);
+
+	return 0;
+}
+
+static irqreturn_t arizona_hpdet_irq(int irq, void *data)
+{
+	struct arizona_extcon_info *info = data;
+	struct arizona *arizona = info->arizona;
+	int id_gpio = arizona->pdata.hpdet_id_gpio;
+	unsigned int report = EXTCON_JACK_HEADPHONE;
+	int ret, reading;
+	bool mic = false;
+
+	mutex_lock(&info->lock);
+
+	/* If we got a spurious IRQ for some reason then ignore it */
+	if (!info->hpdet_active) {
+		dev_warn(arizona->dev, "Spurious HPDET IRQ\n");
+		mutex_unlock(&info->lock);
+		return IRQ_NONE;
+	}
+
+	/* If the cable was removed while measuring ignore the result */
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to check cable state: %d\n",
+			ret);
+		goto out;
+	} else if (!ret) {
+		dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
+		goto done;
+	}
+
+	ret = arizona_hpdet_read(info);
+	if (ret == -EAGAIN)
+		goto out;
+	else if (ret < 0)
+		goto done;
+	reading = ret;
+
+	/* Reset back to starting range */
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_HEADPHONE_DETECT_1,
+			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
+			   0);
+
+	ret = arizona_hpdet_do_id(info, &reading, &mic);
+	if (ret == -EAGAIN)
+		goto out;
+	else if (ret < 0)
+		goto done;
+
+	/* Report high impedence cables as line outputs */
+	if (reading >= 5000)
+		report = EXTCON_JACK_LINE_OUT;
+	else
+		report = EXTCON_JACK_HEADPHONE;
+
+	ret = extcon_set_state_sync(info->edev, report, true);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to report HP/line: %d\n",
+			ret);
+
+done:
+	/* Reset back to starting range */
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_HEADPHONE_DETECT_1,
+			   ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
+			   0);
+
+	arizona_extcon_hp_clamp(info, false);
+
+	if (id_gpio)
+		gpio_set_value_cansleep(id_gpio, 0);
+
+	/* If we have a mic then reenable MICDET */
+	if (mic || info->mic)
+		arizona_start_mic(info);
+
+	if (info->hpdet_active) {
+		pm_runtime_put_autosuspend(info->dev);
+		info->hpdet_active = false;
+	}
+
+	info->hpdet_done = true;
+
+out:
+	mutex_unlock(&info->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void arizona_identify_headphone(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	int ret;
+
+	if (info->hpdet_done)
+		return;
+
+	dev_dbg(arizona->dev, "Starting HPDET\n");
+
+	/* Make sure we keep the device enabled during the measurement */
+	pm_runtime_get(info->dev);
+
+	info->hpdet_active = true;
+
+	arizona_stop_mic(info);
+
+	arizona_extcon_hp_clamp(info, true);
+
+	ret = regmap_update_bits(arizona->regmap,
+				 ARIZONA_ACCESSORY_DETECT_MODE_1,
+				 ARIZONA_ACCDET_MODE_MASK,
+				 arizona->pdata.hpdet_channel);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
+		goto err;
+	}
+
+	ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+				 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
+			ret);
+		goto err;
+	}
+
+	return;
+
+err:
+	arizona_extcon_hp_clamp(info, false);
+	pm_runtime_put_autosuspend(info->dev);
+
+	/* Just report headphone */
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
+
+	if (info->mic)
+		arizona_start_mic(info);
+
+	info->hpdet_active = false;
+}
+
+static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	int hp_reading = 32;
+	bool mic;
+	int ret;
+
+	dev_dbg(arizona->dev, "Starting identification via HPDET\n");
+
+	/* Make sure we keep the device enabled during the measurement */
+	pm_runtime_get_sync(info->dev);
+
+	info->hpdet_active = true;
+
+	arizona_extcon_hp_clamp(info, true);
+
+	ret = regmap_update_bits(arizona->regmap,
+				 ARIZONA_ACCESSORY_DETECT_MODE_1,
+				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
+				 info->micd_modes[0].src |
+				 arizona->pdata.hpdet_channel);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
+		goto err;
+	}
+
+	if (arizona->pdata.hpdet_acc_id_line) {
+		ret = regmap_update_bits(arizona->regmap,
+					 ARIZONA_HEADPHONE_DETECT_1,
+					 ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Can't start HPDETL measurement: %d\n",
+				ret);
+			goto err;
+		}
+	} else {
+		arizona_hpdet_do_id(info, &hp_reading, &mic);
+	}
+
+	return;
+
+err:
+	/* Just report headphone */
+	ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
+	if (ret != 0)
+		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
+
+	info->hpdet_active = false;
+}
+
+static void arizona_micd_timeout_work(struct work_struct *work)
+{
+	struct arizona_extcon_info *info = container_of(work,
+						struct arizona_extcon_info,
+						micd_timeout_work.work);
+
+	mutex_lock(&info->lock);
+
+	dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n");
+
+	info->detecting = false;
+
+	arizona_identify_headphone(info);
+
+	mutex_unlock(&info->lock);
+}
+
+static int arizona_micd_adc_read(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int val;
+	int ret;
+
+	/* Must disable MICD before we read the ADCVAL */
+	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+			   ARIZONA_MICD_ENA, 0);
+
+	ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_4, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev,
+			"Failed to read MICDET_ADCVAL: %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(arizona->dev, "MICDET_ADCVAL: %x\n", val);
+
+	val &= ARIZONA_MICDET_ADCVAL_MASK;
+	if (val < ARRAY_SIZE(arizona_micd_levels))
+		val = arizona_micd_levels[val];
+	else
+		val = INT_MAX;
+
+	if (val <= QUICK_HEADPHONE_MAX_OHM)
+		val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_0;
+	else if (val <= MICROPHONE_MIN_OHM)
+		val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_1;
+	else if (val <= MICROPHONE_MAX_OHM)
+		val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_8;
+	else
+		val = ARIZONA_MICD_LVL_8;
+
+	return val;
+}
+
+static int arizona_micd_read(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int val = 0;
+	int ret, i;
+
+	for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) {
+		ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to read MICDET: %d\n", ret);
+			return ret;
+		}
+
+		dev_dbg(arizona->dev, "MICDET: %x\n", val);
+
+		if (!(val & ARIZONA_MICD_VALID)) {
+			dev_warn(arizona->dev,
+				 "Microphone detection state invalid\n");
+			return -EINVAL;
+		}
+	}
+
+	if (i == 10 && !(val & MICD_LVL_0_TO_8)) {
+		dev_err(arizona->dev, "Failed to get valid MICDET value\n");
+		return -EINVAL;
+	}
+
+	return val;
+}
+
+static int arizona_micdet_reading(void *priv)
+{
+	struct arizona_extcon_info *info = priv;
+	struct arizona *arizona = info->arizona;
+	int ret, val;
+
+	if (info->detecting && arizona->pdata.micd_software_compare)
+		ret = arizona_micd_adc_read(info);
+	else
+		ret = arizona_micd_read(info);
+	if (ret < 0)
+		return ret;
+
+	val = ret;
+
+	/* Due to jack detect this should never happen */
+	if (!(val & ARIZONA_MICD_STS)) {
+		dev_warn(arizona->dev, "Detected open circuit\n");
+		info->mic = false;
+		info->detecting = false;
+		arizona_identify_headphone(info);
+		return 0;
+	}
+
+	/* If we got a high impedence we should have a headset, report it. */
+	if (val & ARIZONA_MICD_LVL_8) {
+		info->mic = true;
+		info->detecting = false;
+
+		arizona_identify_headphone(info);
+
+		ret = extcon_set_state_sync(info->edev,
+					      EXTCON_JACK_MICROPHONE, true);
+		if (ret != 0)
+			dev_err(arizona->dev, "Headset report failed: %d\n",
+				ret);
+
+		/* Don't need to regulate for button detection */
+		ret = regulator_allow_bypass(info->micvdd, true);
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
+				ret);
+		}
+
+		return 0;
+	}
+
+	/* If we detected a lower impedence during initial startup
+	 * then we probably have the wrong polarity, flip it.  Don't
+	 * do this for the lowest impedences to speed up detection of
+	 * plain headphones.  If both polarities report a low
+	 * impedence then give up and report headphones.
+	 */
+	if (val & MICD_LVL_1_TO_7) {
+		if (info->jack_flips >= info->micd_num_modes * 10) {
+			dev_dbg(arizona->dev, "Detected HP/line\n");
+
+			info->detecting = false;
+
+			arizona_identify_headphone(info);
+		} else {
+			info->micd_mode++;
+			if (info->micd_mode == info->micd_num_modes)
+				info->micd_mode = 0;
+			arizona_extcon_set_mode(info, info->micd_mode);
+
+			info->jack_flips++;
+
+			if (arizona->pdata.micd_software_compare)
+				regmap_update_bits(arizona->regmap,
+						   ARIZONA_MIC_DETECT_1,
+						   ARIZONA_MICD_ENA,
+						   ARIZONA_MICD_ENA);
+
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->micd_timeout_work,
+					   msecs_to_jiffies(arizona->pdata.micd_timeout));
+		}
+
+		return 0;
+	}
+
+	/*
+	 * If we're still detecting and we detect a short then we've
+	 * got a headphone.
+	 */
+	dev_dbg(arizona->dev, "Headphone detected\n");
+	info->detecting = false;
+
+	arizona_identify_headphone(info);
+
+	return 0;
+}
+
+static int arizona_button_reading(void *priv)
+{
+	struct arizona_extcon_info *info = priv;
+	struct arizona *arizona = info->arizona;
+	int val, key, lvl, i;
+
+	val = arizona_micd_read(info);
+	if (val < 0)
+		return val;
+
+	/*
+	 * If we're still detecting and we detect a short then we've
+	 * got a headphone.  Otherwise it's a button press.
+	 */
+	if (val & MICD_LVL_0_TO_7) {
+		if (info->mic) {
+			dev_dbg(arizona->dev, "Mic button detected\n");
+
+			lvl = val & ARIZONA_MICD_LVL_MASK;
+			lvl >>= ARIZONA_MICD_LVL_SHIFT;
+
+			for (i = 0; i < info->num_micd_ranges; i++)
+				input_report_key(info->input,
+						 info->micd_ranges[i].key, 0);
+
+			if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) {
+				key = info->micd_ranges[ffs(lvl) - 1].key;
+				input_report_key(info->input, key, 1);
+				input_sync(info->input);
+			} else {
+				dev_err(arizona->dev, "Button out of range\n");
+			}
+		} else {
+			dev_warn(arizona->dev, "Button with no mic: %x\n",
+				 val);
+		}
+	} else {
+		dev_dbg(arizona->dev, "Mic button released\n");
+		for (i = 0; i < info->num_micd_ranges; i++)
+			input_report_key(info->input,
+					 info->micd_ranges[i].key, 0);
+		input_sync(info->input);
+		arizona_extcon_pulse_micbias(info);
+	}
+
+	return 0;
+}
+
+static void arizona_micd_detect(struct work_struct *work)
+{
+	struct arizona_extcon_info *info = container_of(work,
+						struct arizona_extcon_info,
+						micd_detect_work.work);
+	struct arizona *arizona = info->arizona;
+	int ret;
+
+	cancel_delayed_work_sync(&info->micd_timeout_work);
+
+	mutex_lock(&info->lock);
+
+	/* If the cable was removed while measuring ignore the result */
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to check cable state: %d\n",
+				ret);
+		mutex_unlock(&info->lock);
+		return;
+	} else if (!ret) {
+		dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
+		mutex_unlock(&info->lock);
+		return;
+	}
+
+	if (info->detecting)
+		arizona_micdet_reading(info);
+	else
+		arizona_button_reading(info);
+
+	pm_runtime_mark_last_busy(info->dev);
+	mutex_unlock(&info->lock);
+}
+
+static irqreturn_t arizona_micdet(int irq, void *data)
+{
+	struct arizona_extcon_info *info = data;
+	struct arizona *arizona = info->arizona;
+	int debounce = arizona->pdata.micd_detect_debounce;
+
+	cancel_delayed_work_sync(&info->micd_detect_work);
+	cancel_delayed_work_sync(&info->micd_timeout_work);
+
+	mutex_lock(&info->lock);
+	if (!info->detecting)
+		debounce = 0;
+	mutex_unlock(&info->lock);
+
+	if (debounce)
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->micd_detect_work,
+				   msecs_to_jiffies(debounce));
+	else
+		arizona_micd_detect(&info->micd_detect_work.work);
+
+	return IRQ_HANDLED;
+}
+
+static void arizona_hpdet_work(struct work_struct *work)
+{
+	struct arizona_extcon_info *info = container_of(work,
+						struct arizona_extcon_info,
+						hpdet_work.work);
+
+	mutex_lock(&info->lock);
+	arizona_start_hpdet_acc_id(info);
+	mutex_unlock(&info->lock);
+}
+
+static int arizona_hpdet_wait(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	unsigned int val;
+	int i, ret;
+
+	for (i = 0; i < ARIZONA_HPDET_WAIT_COUNT; i++) {
+		ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2,
+				&val);
+		if (ret) {
+			dev_err(arizona->dev,
+				"Failed to read HPDET state: %d\n", ret);
+			return ret;
+		}
+
+		switch (info->hpdet_ip_version) {
+		case 0:
+			if (val & ARIZONA_HP_DONE)
+				return 0;
+			break;
+		default:
+			if (val & ARIZONA_HP_DONE_B)
+				return 0;
+			break;
+		}
+
+		msleep(ARIZONA_HPDET_WAIT_DELAY_MS);
+	}
+
+	dev_warn(arizona->dev, "HPDET did not appear to complete\n");
+
+	return -ETIMEDOUT;
+}
+
+static irqreturn_t arizona_jackdet(int irq, void *data)
+{
+	struct arizona_extcon_info *info = data;
+	struct arizona *arizona = info->arizona;
+	unsigned int val, present, mask;
+	bool cancelled_hp, cancelled_mic;
+	int ret, i;
+
+	cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work);
+	cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work);
+
+	pm_runtime_get_sync(info->dev);
+
+	mutex_lock(&info->lock);
+
+	if (info->micd_clamp) {
+		mask = ARIZONA_MICD_CLAMP_STS;
+		present = 0;
+	} else {
+		mask = ARIZONA_JD1_STS;
+		if (arizona->pdata.jd_invert)
+			present = 0;
+		else
+			present = ARIZONA_JD1_STS;
+	}
+
+	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
+			ret);
+		mutex_unlock(&info->lock);
+		pm_runtime_put_autosuspend(info->dev);
+		return IRQ_NONE;
+	}
+
+	val &= mask;
+	if (val == info->last_jackdet) {
+		dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n");
+		if (cancelled_hp)
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->hpdet_work,
+					   msecs_to_jiffies(HPDET_DEBOUNCE));
+
+		if (cancelled_mic) {
+			int micd_timeout = arizona->pdata.micd_timeout;
+
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->micd_timeout_work,
+					   msecs_to_jiffies(micd_timeout));
+		}
+
+		goto out;
+	}
+	info->last_jackdet = val;
+
+	if (info->last_jackdet == present) {
+		dev_dbg(arizona->dev, "Detected jack\n");
+		ret = extcon_set_state_sync(info->edev,
+					      EXTCON_MECHANICAL, true);
+
+		if (ret != 0)
+			dev_err(arizona->dev, "Mechanical report failed: %d\n",
+				ret);
+
+		info->detecting = true;
+		info->mic = false;
+		info->jack_flips = 0;
+
+		if (!arizona->pdata.hpdet_acc_id) {
+			arizona_start_mic(info);
+		} else {
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->hpdet_work,
+					   msecs_to_jiffies(HPDET_DEBOUNCE));
+		}
+
+		if (info->micd_clamp || !arizona->pdata.jd_invert)
+			regmap_update_bits(arizona->regmap,
+					   ARIZONA_JACK_DETECT_DEBOUNCE,
+					   ARIZONA_MICD_CLAMP_DB |
+					   ARIZONA_JD1_DB, 0);
+	} else {
+		dev_dbg(arizona->dev, "Detected jack removal\n");
+
+		arizona_stop_mic(info);
+
+		info->num_hpdet_res = 0;
+		for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
+			info->hpdet_res[i] = 0;
+		info->mic = false;
+		info->hpdet_done = false;
+		info->hpdet_retried = false;
+
+		for (i = 0; i < info->num_micd_ranges; i++)
+			input_report_key(info->input,
+					 info->micd_ranges[i].key, 0);
+		input_sync(info->input);
+
+		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+			ret = extcon_set_state_sync(info->edev,
+					arizona_cable[i], false);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Removal report failed: %d\n", ret);
+		}
+
+		/*
+		 * If the jack was removed during a headphone detection we
+		 * need to wait for the headphone detection to finish, as
+		 * it can not be aborted. We don't want to be able to start
+		 * a new headphone detection from a fresh insert until this
+		 * one is finished.
+		 */
+		arizona_hpdet_wait(info);
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB,
+				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
+	}
+
+out:
+	/* Clear trig_sts to make sure DCVDD is not forced up */
+	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
+		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
+		     ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
+		     ARIZONA_JD1_FALL_TRIG_STS |
+		     ARIZONA_JD1_RISE_TRIG_STS);
+
+	mutex_unlock(&info->lock);
+
+	pm_runtime_mark_last_busy(info->dev);
+	pm_runtime_put_autosuspend(info->dev);
+
+	return IRQ_HANDLED;
+}
+
+/* Map a level onto a slot in the register bank */
+static void arizona_micd_set_level(struct arizona *arizona, int index,
+				   unsigned int level)
+{
+	int reg;
+	unsigned int mask;
+
+	reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2);
+
+	if (!(index % 2)) {
+		mask = 0x3f00;
+		level <<= 8;
+	} else {
+		mask = 0x3f;
+	}
+
+	/* Program the level itself */
+	regmap_update_bits(arizona->regmap, reg, mask, level);
+}
+
+static int arizona_extcon_get_micd_configs(struct device *dev,
+					   struct arizona *arizona)
+{
+	const char * const prop = "wlf,micd-configs";
+	const int entries_per_config = 3;
+	struct arizona_micd_config *micd_configs;
+	int nconfs, ret;
+	int i, j;
+	u32 *vals;
+
+	nconfs = device_property_count_u32(arizona->dev, prop);
+	if (nconfs <= 0)
+		return 0;
+
+	vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL);
+	if (!vals)
+		return -ENOMEM;
+
+	ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs);
+	if (ret < 0)
+		goto out;
+
+	nconfs /= entries_per_config;
+	micd_configs = devm_kcalloc(dev, nconfs, sizeof(*micd_configs),
+				    GFP_KERNEL);
+	if (!micd_configs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0, j = 0; i < nconfs; ++i) {
+		micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0;
+		micd_configs[i].bias = vals[j++];
+		micd_configs[i].gpio = vals[j++];
+	}
+
+	arizona->pdata.micd_configs = micd_configs;
+	arizona->pdata.num_micd_configs = nconfs;
+
+out:
+	kfree(vals);
+	return ret;
+}
+
+static int arizona_extcon_device_get_pdata(struct device *dev,
+					   struct arizona *arizona)
+{
+	struct arizona_pdata *pdata = &arizona->pdata;
+	unsigned int val = ARIZONA_ACCDET_MODE_HPL;
+	int ret;
+
+	device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val);
+	switch (val) {
+	case ARIZONA_ACCDET_MODE_HPL:
+	case ARIZONA_ACCDET_MODE_HPR:
+		pdata->hpdet_channel = val;
+		break;
+	default:
+		dev_err(arizona->dev,
+			"Wrong wlf,hpdet-channel DT value %d\n", val);
+		pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
+	}
+
+	device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce",
+				 &pdata->micd_detect_debounce);
+
+	device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time",
+				 &pdata->micd_bias_start_time);
+
+	device_property_read_u32(arizona->dev, "wlf,micd-rate",
+				 &pdata->micd_rate);
+
+	device_property_read_u32(arizona->dev, "wlf,micd-dbtime",
+				 &pdata->micd_dbtime);
+
+	device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms",
+				 &pdata->micd_timeout);
+
+	pdata->micd_force_micbias = device_property_read_bool(arizona->dev,
+						"wlf,micd-force-micbias");
+
+	pdata->micd_software_compare = device_property_read_bool(arizona->dev,
+						"wlf,micd-software-compare");
+
+	pdata->jd_invert = device_property_read_bool(arizona->dev,
+						     "wlf,jd-invert");
+
+	device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw);
+
+	pdata->jd_gpio5 = device_property_read_bool(arizona->dev,
+						    "wlf,use-jd2");
+	pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev,
+						"wlf,use-jd2-nopull");
+
+	ret = arizona_extcon_get_micd_configs(dev, arizona);
+	if (ret < 0)
+		dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret);
+
+	return 0;
+}
+
+static int arizona_extcon_probe(struct platform_device *pdev)
+{
+	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_pdata *pdata = &arizona->pdata;
+	struct arizona_extcon_info *info;
+	unsigned int val;
+	unsigned int clamp_mode;
+	int jack_irq_fall, jack_irq_rise;
+	int ret, mode, i, j;
+
+	if (!arizona->dapm || !arizona->dapm->card)
+		return -EPROBE_DEFER;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	if (!dev_get_platdata(arizona->dev))
+		arizona_extcon_device_get_pdata(&pdev->dev, arizona);
+
+	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
+	if (IS_ERR(info->micvdd)) {
+		ret = PTR_ERR(info->micvdd);
+		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&info->lock);
+	info->arizona = arizona;
+	info->dev = &pdev->dev;
+	info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS);
+	INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work);
+	INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect);
+	INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work);
+	platform_set_drvdata(pdev, info);
+
+	switch (arizona->type) {
+	case WM5102:
+		switch (arizona->rev) {
+		case 0:
+			info->micd_reva = true;
+			break;
+		default:
+			info->micd_clamp = true;
+			info->hpdet_ip_version = 1;
+			break;
+		}
+		break;
+	case WM5110:
+	case WM8280:
+		switch (arizona->rev) {
+		case 0 ... 2:
+			break;
+		default:
+			info->micd_clamp = true;
+			info->hpdet_ip_version = 2;
+			break;
+		}
+		break;
+	case WM8998:
+	case WM1814:
+		info->micd_clamp = true;
+		info->hpdet_ip_version = 2;
+		break;
+	default:
+		break;
+	}
+
+	info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(&pdev->dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
+	if (ret < 0) {
+		dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	info->input = devm_input_allocate_device(&pdev->dev);
+	if (!info->input) {
+		dev_err(arizona->dev, "Can't allocate input dev\n");
+		ret = -ENOMEM;
+		return ret;
+	}
+
+	info->input->name = "Headset";
+	info->input->phys = "arizona/extcon";
+
+	if (!pdata->micd_timeout)
+		pdata->micd_timeout = DEFAULT_MICD_TIMEOUT;
+
+	if (pdata->num_micd_configs) {
+		info->micd_modes = pdata->micd_configs;
+		info->micd_num_modes = pdata->num_micd_configs;
+	} else {
+		info->micd_modes = micd_default_modes;
+		info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
+	}
+
+	if (arizona->pdata.gpsw > 0)
+		regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1,
+				ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw);
+
+	if (pdata->micd_pol_gpio > 0) {
+		if (info->micd_modes[0].gpio)
+			mode = GPIOF_OUT_INIT_HIGH;
+		else
+			mode = GPIOF_OUT_INIT_LOW;
+
+		ret = devm_gpio_request_one(&pdev->dev, pdata->micd_pol_gpio,
+					    mode, "MICD polarity");
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
+				pdata->micd_pol_gpio, ret);
+			return ret;
+		}
+
+		info->micd_pol_gpio = gpio_to_desc(pdata->micd_pol_gpio);
+	} else {
+		if (info->micd_modes[0].gpio)
+			mode = GPIOD_OUT_HIGH;
+		else
+			mode = GPIOD_OUT_LOW;
+
+		/* We can't use devm here because we need to do the get
+		 * against the MFD device, as that is where the of_node
+		 * will reside, but if we devm against that the GPIO
+		 * will not be freed if the extcon driver is unloaded.
+		 */
+		info->micd_pol_gpio = gpiod_get_optional(arizona->dev,
+							 "wlf,micd-pol",
+							 GPIOD_OUT_LOW);
+		if (IS_ERR(info->micd_pol_gpio)) {
+			ret = PTR_ERR(info->micd_pol_gpio);
+			dev_err(arizona->dev,
+				"Failed to get microphone polarity GPIO: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (arizona->pdata.hpdet_id_gpio > 0) {
+		ret = devm_gpio_request_one(&pdev->dev,
+					    arizona->pdata.hpdet_id_gpio,
+					    GPIOF_OUT_INIT_LOW,
+					    "HPDET");
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
+				arizona->pdata.hpdet_id_gpio, ret);
+			goto err_gpio;
+		}
+	}
+
+	if (arizona->pdata.micd_bias_start_time)
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_BIAS_STARTTIME_MASK,
+				   arizona->pdata.micd_bias_start_time
+				   << ARIZONA_MICD_BIAS_STARTTIME_SHIFT);
+
+	if (arizona->pdata.micd_rate)
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_RATE_MASK,
+				   arizona->pdata.micd_rate
+				   << ARIZONA_MICD_RATE_SHIFT);
+
+	switch (arizona->pdata.micd_dbtime) {
+	case MICD_DBTIME_FOUR_READINGS:
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_DBTIME_MASK,
+				   ARIZONA_MICD_DBTIME);
+		break;
+	case MICD_DBTIME_TWO_READINGS:
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				   ARIZONA_MICD_DBTIME_MASK, 0);
+		break;
+	default:
+		break;
+	}
+
+	BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) <
+		     ARIZONA_NUM_MICD_BUTTON_LEVELS);
+
+	if (arizona->pdata.num_micd_ranges) {
+		info->micd_ranges = pdata->micd_ranges;
+		info->num_micd_ranges = pdata->num_micd_ranges;
+	} else {
+		info->micd_ranges = micd_default_ranges;
+		info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges);
+	}
+
+	if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) {
+		dev_err(arizona->dev, "Too many MICD ranges: %d\n",
+			arizona->pdata.num_micd_ranges);
+	}
+
+	if (info->num_micd_ranges > 1) {
+		for (i = 1; i < info->num_micd_ranges; i++) {
+			if (info->micd_ranges[i - 1].max >
+			    info->micd_ranges[i].max) {
+				dev_err(arizona->dev,
+					"MICD ranges must be sorted\n");
+				ret = -EINVAL;
+				goto err_gpio;
+			}
+		}
+	}
+
+	/* Disable all buttons by default */
+	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
+			   ARIZONA_MICD_LVL_SEL_MASK, 0x81);
+
+	/* Set up all the buttons the user specified */
+	for (i = 0; i < info->num_micd_ranges; i++) {
+		for (j = 0; j < ARIZONA_NUM_MICD_BUTTON_LEVELS; j++)
+			if (arizona_micd_levels[j] >= info->micd_ranges[i].max)
+				break;
+
+		if (j == ARIZONA_NUM_MICD_BUTTON_LEVELS) {
+			dev_err(arizona->dev, "Unsupported MICD level %d\n",
+				info->micd_ranges[i].max);
+			ret = -EINVAL;
+			goto err_gpio;
+		}
+
+		dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
+			arizona_micd_levels[j], i);
+
+		arizona_micd_set_level(arizona, i, j);
+		input_set_capability(info->input, EV_KEY,
+				     info->micd_ranges[i].key);
+
+		/* Enable reporting of that range */
+		regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2,
+				   1 << i, 1 << i);
+	}
+
+	/* Set all the remaining keys to a maximum */
+	for (; i < ARIZONA_MAX_MICD_RANGE; i++)
+		arizona_micd_set_level(arizona, i, 0x3f);
+
+	/*
+	 * If we have a clamp use it, activating in conjunction with
+	 * GPIO5 if that is connected for jack detect operation.
+	 */
+	if (info->micd_clamp) {
+		if (arizona->pdata.jd_gpio5) {
+			/* Put the GPIO into input mode with optional pull */
+			val = 0xc101;
+			if (arizona->pdata.jd_gpio5_nopull)
+				val &= ~ARIZONA_GPN_PU;
+
+			regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
+				     val);
+
+			if (arizona->pdata.jd_invert)
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H;
+			else
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H;
+		} else {
+			if (arizona->pdata.jd_invert)
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH;
+			else
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL;
+		}
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_MICD_CLAMP_CONTROL,
+				   ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode);
+
+		regmap_update_bits(arizona->regmap,
+				   ARIZONA_JACK_DETECT_DEBOUNCE,
+				   ARIZONA_MICD_CLAMP_DB,
+				   ARIZONA_MICD_CLAMP_DB);
+	}
+
+	arizona_extcon_set_mode(info, 0);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_idle(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	if (info->micd_clamp) {
+		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
+		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
+	} else {
+		jack_irq_rise = ARIZONA_IRQ_JD_RISE;
+		jack_irq_fall = ARIZONA_IRQ_JD_FALL;
+	}
+
+	ret = arizona_request_irq(arizona, jack_irq_rise,
+				  "JACKDET rise", arizona_jackdet, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
+			ret);
+		goto err_pm;
+	}
+
+	ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
+			ret);
+		goto err_rise;
+	}
+
+	ret = arizona_request_irq(arizona, jack_irq_fall,
+				  "JACKDET fall", arizona_jackdet, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
+		goto err_rise_wake;
+	}
+
+	ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
+			ret);
+		goto err_fall;
+	}
+
+	ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET,
+				  "MICDET", arizona_micdet, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret);
+		goto err_fall_wake;
+	}
+
+	ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET,
+				  "HPDET", arizona_hpdet_irq, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret);
+		goto err_micdet;
+	}
+
+	arizona_clk32k_enable(arizona);
+	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE,
+			   ARIZONA_JD1_DB, ARIZONA_JD1_DB);
+	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
+			   ARIZONA_JD1_ENA, ARIZONA_JD1_ENA);
+
+	ret = regulator_allow_bypass(info->micvdd, true);
+	if (ret != 0)
+		dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n",
+			 ret);
+
+	ret = input_register_device(info->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
+		goto err_hpdet;
+	}
+
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+
+err_hpdet:
+	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
+err_micdet:
+	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
+err_fall_wake:
+	arizona_set_irq_wake(arizona, jack_irq_fall, 0);
+err_fall:
+	arizona_free_irq(arizona, jack_irq_fall, info);
+err_rise_wake:
+	arizona_set_irq_wake(arizona, jack_irq_rise, 0);
+err_rise:
+	arizona_free_irq(arizona, jack_irq_rise, info);
+err_pm:
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+err_gpio:
+	gpiod_put(info->micd_pol_gpio);
+	return ret;
+}
+
+static int arizona_extcon_remove(struct platform_device *pdev)
+{
+	struct arizona_extcon_info *info = platform_get_drvdata(pdev);
+	struct arizona *arizona = info->arizona;
+	int jack_irq_rise, jack_irq_fall;
+	bool change;
+	int ret;
+
+	ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				       ARIZONA_MICD_ENA, 0,
+				       &change);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
+			ret);
+	} else if (change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_put(info->dev);
+	}
+
+	gpiod_put(info->micd_pol_gpio);
+
+	pm_runtime_disable(&pdev->dev);
+
+	regmap_update_bits(arizona->regmap,
+			   ARIZONA_MICD_CLAMP_CONTROL,
+			   ARIZONA_MICD_CLAMP_MODE_MASK, 0);
+
+	if (info->micd_clamp) {
+		jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
+		jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
+	} else {
+		jack_irq_rise = ARIZONA_IRQ_JD_RISE;
+		jack_irq_fall = ARIZONA_IRQ_JD_FALL;
+	}
+
+	arizona_set_irq_wake(arizona, jack_irq_rise, 0);
+	arizona_set_irq_wake(arizona, jack_irq_fall, 0);
+	arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info);
+	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
+	arizona_free_irq(arizona, jack_irq_rise, info);
+	arizona_free_irq(arizona, jack_irq_fall, info);
+	cancel_delayed_work_sync(&info->hpdet_work);
+	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
+			   ARIZONA_JD1_ENA, 0);
+	arizona_clk32k_disable(arizona);
+
+	return 0;
+}
+
+static struct platform_driver arizona_extcon_driver = {
+	.driver		= {
+		.name	= "arizona-extcon",
+	},
+	.probe		= arizona_extcon_probe,
+	.remove		= arizona_extcon_remove,
+};
+
+module_platform_driver(arizona_extcon_driver);
+
+MODULE_DESCRIPTION("Arizona Extcon driver");
+MODULE_AUTHOR("Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:extcon-arizona");
-- 
2.28.0




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux