On Thu, Jan 07, 2021 at 05:51:31PM +0100, Stephan Gerhold wrote: > Sound is broken on the DragonBoard 410c (apq8016_sbc) since 5.10: > > hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95 > qcom-apq8016-sbc 7702000.sound: Failed to set jack: -95 > ADV7533: ASoC: error at snd_soc_link_init on ADV7533: -95 > hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: error at snd_soc_component_set_jack on hdmi-audio-codec.1.auto: -95 > qcom-apq8016-sbc: probe of 7702000.sound failed with error -95 > > This happens because apq8016_sbc calls snd_soc_component_set_jack() on > all codec DAIs and attempts to ignore failures with return code -ENOTSUPP. > -ENOTSUPP is also excluded from error logging in soc_component_ret(). > > However, hdmi_codec_set_jack() returns -E*OP*NOTSUPP if jack detection > is not supported, which is not handled in apq8016_sbc and soc_component_ret(). > Make it return -ENOTSUPP instead to fix sound and silence the errors. > > Cc: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx> > Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > Fixes: 55c5cc63ab32 ("ASoC: hdmi-codec: Use set_jack ops to set jack") > Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> For imx-hdmi: Acked-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>