Ups my bad, somehow the model number got commented out by an update script I ran yesterday. The drivers were recompiled with the "with-debug=detect" option set. I've attached the dmesg, codec#0 output and amixer contents.
Dmesg is not very talkative, it did not show "hda_codec_setup_stream:NID=", however I get something of the type "hda_generic: no proper output path found".
About the testing, I performed speaker-test every time I changed something (still only output on "Front L/R channels").
Patrick
> From: zhe.jiang@xxxxxxxxx
> To: fuuss@xxxxxxxxxxx
> Date: Wed, 16 Jan 2008 13:49:43 +0800
> CC: cmatsuoka@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx
> Subject: Re: intel-hd on an intel G33 motherboard
>
> On Wed, 2008-01-16 at 02:22 +0800, De Fuuss wrote:
>>
>> Hi,
>>
>> I have recompiled the driver with --with-debug=detect. Dmesg output is
>> attached to this mail. ALSA specificities seem to be present this
>> time.
> Hi,
>
>>From the dmesg, there is "hda_codec: Unknown model for ALC883, trying
> auto-probe from BIOS"
> It looks like that no "model=" is assigned.
> Did you assign model for the driver?
>
> Can you play some music?
> Then there will be some info in the dmesg like
> "hda_codec_setup_stream:NID= ".
> Please paste such info and give the result of
> "cat /proc/asound/card0/codec#0".
>
> BTW, how did you do the testing?
> You run speaker-test or by other way?
>
>>From the codec info, it seems that there are paths from DAC to Jack.
> So it's a little weird that all other jacks are silent.
>
> Thanks!
>
>> Hope this helps.
>>
>> Best regards,
>>
>> Patrick
>>
>>> From: zhe.jiang@xxxxxxxxx
>>> To: fuuss@xxxxxxxxxxx
>>> Date: Tue, 15 Jan 2008 09:32:35 +0800
>>> CC: cmatsuoka@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx
>>> Subject: Re: intel-hd on an intel G33 motherboard
>>>
>>> On Mon, 2008-01-14 at 17:11 +0000, De Fuuss wrote:
>>>> The jumper is now set to enable onboard (Intel HDA) audio.
>>>> At the back of the barebone there are 5 jacks (4 channels for 7.1
>> and 1 line in channel) + 1 spdif out.
>>>> From these, using 6stack-hp, only the "Front L/R" jack works, none
>> of the others
>>>> On the front, there are 2 jacks (1 headphones and 1 microphone).
>> The headphone jack works.
>>>>
>>> Can you tell us how you did the testing?
>>>>From the driver code, it's not likely that all other jacks don't
>> work.
>>>
>>> Because the driver support up-mixing, you can play a 2-channel music
>> and
>>> get sound from 4 jacks on the back panel.
>>>
>>> I read the dmesg output that you sent to me.
>>> But there is no alsa debug info in it.
>>> Did you really configure the driver with the option
>>> "--with-debug=detect"?
>>> If not, please try it and paste the dmesg info, it is helpful to
>> trace
>>> the issue.
>>>
>>> Best regards!
>>> Jiang,zhe
>>>> All the channels have been set to 100% in alsamixer.
>>>>
>>>> Considering that a week ago I had 0.0 and today I'm at 2.0, it's
>> already a improvement. ;-)
>>>>
>>>> Patrick
>>>>
>>>>> Subject: Re: intel-hd on an intel G33 motherboard
>>>>> From: zhe.jiang@xxxxxxxxx
>>>>> To: fuuss@xxxxxxxxxxx
>>>>> CC: cmatsuoka@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx
>>>>> Date: Mon, 14 Jan 2008 16:43:00 +0800
>>>>>
>>>>> On Mon, 2008-01-14 at 02:06 +0800, De Fuuss wrote:
>>>>>>
>>>>>> Following your advice, I tested per channel output. Using either
>>>>>> 6stack-dig or 6stack-hp, I get noise from Front Left and Right
>> jacks,
>>>>>> using speaker-test (X=1 and 2) but not on any other channels.
>>>>>
>>>>> Hi,
>>>>> Did you mean that after you changed the 'Jumper',
>>>>> you could get the sound from the Front jack on the back channel?
>>>>>
>>>>>> Patrick
>>>>>>
>>>>>>> Date: Sun, 13 Jan 2008 01:01:50 -0200
>>>>>>> From: cmatsuoka@xxxxxxxxx
>>>>>>> To: fuuss@xxxxxxxxxxx
>>>>>>> CC: zhe.jiang@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx
>>>>>>> Subject: Re: intel-hd on an intel G33 motherboard
>>>>>>>
>>>>>>> 2008/1/12 De Fuuss :
>>>>>>>
>>>>>>>> I get the uneasy feeling that something is messed up with this
>>>>>> board. Anyway, for completeness' sake, I attached the results of
>>>>>> amixer contents, cat /proc/asound/card0/codec#0 and dmesg for the
>>>>>> module loaded as 6stack-dig. I have to try 6stack-hp again to
>> confirm
>>>>>> if I get something there.
>>>>>>>
>>>>>>> I fixed the Inspiron output, and I'm adding the SG33G5M codec to
>> the
>>>>>>> codecgraph codecs collection (git repository at
>>>>>>> http://helllabs.org/git/codecgraph.git). If nodes 0x14, 0x15,
>> 0x16
>>>>>> and
>>>>>>> 0x17 are the front, rear, clfe and side connectors in the back
>>>>>> panel,
>>>>>>> 6stack-hp should work (at least for the outputs). You can test
>> the
>>>>>>> outputs using "speaker-test -Dplug:surround71 -c8 -sX" (where X
>>>>>> varies
>>>>>>> from 1 to 8) and a pair of headphones.
>>>>>>> _______________________________________________
>>>>>>> Alsa-devel mailing list
>>>>>>> Alsa-devel@xxxxxxxxxxxxxxxx
>>>>>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>>>>>
>>>>>> _________________________________________________________________
>>>>>> Express yourself instantly with MSN Messenger! Download today
>> it's
>>>>>> FREE!
>>>>>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>>>>>> _______________________________________________
>>>>>> Alsa-devel mailing list
>>>>>> Alsa-devel@xxxxxxxxxxxxxxxx
>>>>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _________________________________________________________________
>>>> Express yourself instantly with MSN Messenger! Download today it's
>> FREE!
>>>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>>>
>>> _______________________________________________
>>> Alsa-devel mailing list
>>> Alsa-devel@xxxxxxxxxxxxxxxx
>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>>
>> _________________________________________________________________
>> Express yourself instantly with MSN Messenger! Download today it's
>> FREE!
>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>>
>>
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@xxxxxxxxxxxxxxxx
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
numid=11,iface=MIXER,name='Headphone Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=20,iface=MIXER,name='Front Mic Boost'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.00dB,mute=0
numid=21,iface=MIXER,name='Front Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=19,iface=MIXER,name='Front Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949638.46dB,step=1.50dB,mute=0
numid=2,iface=MIXER,name='Front Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=1,iface=MIXER,name='Front Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=23,23
| dBscale-min=42949626.46dB,step=1.50dB,mute=0
numid=4,iface=MIXER,name='Surround Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=3,iface=MIXER,name='Surround Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=42949626.46dB,step=1.50dB,mute=0
numid=7,iface=MIXER,name='Center Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=5,iface=MIXER,name='Center Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
: values=31
| dBscale-min=42949626.46dB,step=1.50dB,mute=0
numid=8,iface=MIXER,name='LFE Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=6,iface=MIXER,name='LFE Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
: values=31
| dBscale-min=42949626.46dB,step=1.50dB,mute=0
numid=15,iface=MIXER,name='Line Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=14,iface=MIXER,name='Line Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949638.46dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='CD Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=12,iface=MIXER,name='CD Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949638.46dB,step=1.50dB,mute=0
numid=17,iface=MIXER,name='Mic Boost'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.00dB,mute=0
numid=18,iface=MIXER,name='Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=16,iface=MIXER,name='Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949638.46dB,step=1.50dB,mute=0
numid=23,iface=MIXER,name='PC Speaker Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=22,iface=MIXER,name='PC Speaker Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949638.46dB,step=1.50dB,mute=0
numid=25,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=27,iface=MIXER,name='Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=24,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949656.46dB,step=1.50dB,mute=0
numid=26,iface=MIXER,name='Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=42949656.46dB,step=1.50dB,mute=0
numid=31,iface=MIXER,name='IEC958 Playback Con Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0xff AES2=0x00 AES3=0x00]
numid=32,iface=MIXER,name='IEC958 Playback Pro Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0x00 AES2=0x00 AES3=0x00]
numid=33,iface=MIXER,name='IEC958 Playback Default'
; type=IEC958,access=rw------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=34,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=36,iface=MIXER,name='IEC958 Capture Default'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=35,iface=MIXER,name='IEC958 Capture Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=30,iface=MIXER,name='Channel Mode'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 '6ch'
; Item #1 '8ch'
: values=1
numid=28,iface=MIXER,name='Input Source'
; type=ENUMERATED,access=rw------,values=1,items=4
; Item #0 'Mic'
; Item #1 'Front Mic'
; Item #2 'Line'
; Item #3 'CD'
: values=0
numid=29,iface=MIXER,name='Input Source',index=1
; type=ENUMERATED,access=rw------,values=1,items=4
; Item #0 'Mic'
; Item #1 'Front Mic'
; Item #2 'Line'
; Item #3 'CD'
: values=0
numid=10,iface=MIXER,name='Side Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=9,iface=MIXER,name='Side Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=42949626.46dB,step=1.50dB,mute=0
Codec: Realtek ALC888
Address: 0
Vendor Id: 0x10ec0888
Subsystem Id: 0x12970888
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80]
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x17 0x17]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x1f 0x1f]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x1f 0x1f]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x1f 0x1f]
Connection: 2
0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083e: IN OUT HP Detect
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0836: IN OUT Detect
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
Pin-ctls: 0x40: OUT
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0836: IN OUT Detect
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
Pin-ctls: 0x40: OUT
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08373e: IN OUT HP Detect
Pin Default 0x01813040: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x24: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08373e: IN OUT HP Detect
Pin Default 0x02a19850: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08373e: IN OUT HP Detect
Pin Default 0x9993014f: [Fixed] Aux at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08373e: IN OUT HP Detect
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x4005a603: [N/A] Line Out at Ext N/A
Conn = Optical, Color = UNKNOWN
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x01c59160: [Jack] SPDIF In at Ext Rear
Conn = Optical, Color = Pink
Pin-ctls: 0x20: IN
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x11: Stereo
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x25 0x0b
Linux version 2.6.23-gentoo-r3 (root@wizardling) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #33 SMP PREEMPT Tue Jan 15 18:35:04 CET 2008
Command line: root=/dev/sda3 usbcore.autosuspend=1 acpi_irq_balance=0 nmi_watchdog=0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f590000 (usable)
BIOS-e820: 000000007f590000 - 000000007f5e3000 (ACPI NVS)
BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 521616) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.5 present.
ACPI: RSDP 000F79D0, 0014 (r0 Shuttl)
ACPI: RSDT 7F5E3000, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: FACP 7F5E3080, 0074 (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: DSDT 7F5E3100, 4C99 (r1 SHUTTL SG33V10 1000 MSFT 3000000)
ACPI: FACS 7F590000, 0040
ACPI: HPET 7F5E7E80, 0038 (r1 Shuttl Shuttle 42302E31 AWRD 98)
ACPI: MCFG 7F5E7EC0, 003C (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: SLIC 7F5E7F00, 0176 (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: APIC 7F5E7DC0, 0084 (r1 Shuttl Shuttle 42302E31 AWRD 0)
ACPI: SSDT 7F5E86E0, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 521616) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 521616
On node 0 totalpages: 521519
DMA zone: 56 pages used for memmap
DMA zone: 1021 pages reserved
DMA zone: 2922 pages, LIFO batch:0
DMA32 zone: 7075 pages used for memmap
DMA32 zone: 510445 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7f600000:60a00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 29672 bytes of per cpu data
Built 1 zonelists in Zone order. Total pages: 513367
Kernel command line: root=/dev/sda3 usbcore.autosuspend=1 acpi_irq_balance=0 nmi_watchdog=0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2402.152 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
Memory: 2049924k/2086464k available (2445k kernel code, 35876k reserved, 1056k data, 188k init)
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 4807.31 BogoMIPS (lpj=2403656)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 16681615
Detected 16.681 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4804.48 BogoMIPS (lpj=2402240)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-GART: No AMD northbridge found.
Time: tsc clocksource has been installed.
pnp: 00:09: ioport range 0x400-0x4bf has been reserved
pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0c: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:0c: iomem range 0x7f600000-0x7f6fffff has been reserved
pnp: 00:0c: iomem range 0xfed00000-0xfed000ff has been reserved
pnp: 00:0c: iomem range 0x7f590000-0x7f5fffff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: fd800000-fd8fffff
PREFETCH window: fd700000-fd7fffff
PCI: Bridge: 0000:00:1c.1
IO window: e000-efff
MEM window: fdd00000-fddfffff
PREFETCH window: fdc00000-fdcfffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: fda00000-fdafffff
PREFETCH window: fd900000-fd9fffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NTFS driver 2.1.28 [Flags: R/O].
fuse init (API version 7.8)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 7164K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 7F5E80C0, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
ACPI: SSDT 7F5E8580, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THRM] (40 C)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.18 addr 0xfddfc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
sky2 eth0: addr 00:30:1b:bc:63:bd
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f800 irq 14
ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f808 irq 15
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: PLEXTOR DVDR PX-810SA, 1.00, max UDMA/66
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/66
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: CD-ROM PLEXTOR DVDR PX-810SA 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000000000001f500 ctl 0x000000000001f402 bmdma 0x000000000001f100 irq 19
ata4: SATA max UDMA/133 cmd 0x000000000001f300 ctl 0x000000000001f202 bmdma 0x000000000001f108 irq 19
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata5: PATA max UDMA/100 cmd 0x000000000001df00 ctl 0x000000000001de02 bmdma 0x000000000001db00 irq 16
ata6: PATA max UDMA/100 cmd 0x000000000001dd00 ctl 0x000000000001dc02 bmdma 0x000000000001db08 irq 16
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usb 6-1: new low speed USB device using uhci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
input: Shuttle Inc VFD Module as /class/input/input2
input: USB HID v1.11 Keyboard [Shuttle Inc VFD Module] on usb-0000:00:1a.2-2
drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint
input: Shuttle Inc VFD Module as /class/input/input3
input: USB HID v1.11 Device [Shuttle Inc VFD Module] on usb-0000:00:1a.2-2
input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/input4
input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.0-1
input: Logitech USB Receiver as /class/input/input5
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
input: Logitech USB Receiver as /class/input/input6
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
TCP veno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA /home/patrick/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:727: codec_mask = 0x3
ALSA /home/patrick/alsa-driver-1.0.15/pci/hda/hda_codec.c:2146: hda_codec: model '6stack-hp' is selected
ALSA /home/patrick/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:679: hda_generic: no proper input path found
ALSA /home/patrick/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:427: hda_generic: no proper output path found
ALSA /home/patrick/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:1022: hda_generic: no PCM found
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:09.0 to 64
saa7146: found saa7146 @ mem ffffc2000003e000 (revision 1, irq 17) (0x1894,0x0015).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (KNC1 DVB-S)
adapter failed MAC signature check
encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
KNC1-0: MAC addr = 00:09:d6:65:a0:7e
DVB: registering frontend 0 (ST STV0299 DVB-S)...
budget-av: ci interface initialised.
EXT3 FS on sda3, internal journal
lirc_dev: IR Remote Control driver registered, major 61
lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.36 $
lirc_mceusb2: Daniel Melander <lirc@xxxxxxxxxx>, Martin Blatter <martin_a_blatter@xxxxxxxxx>
usb 4-1: reset full speed USB device using uhci_hcd and address 2
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: Shuttle eHome Infrared Transceiver on usb4:2
usbcore: registered new interface driver lirc_mceusb2
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
