Re: [PATCH v4 11/15] ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 20, 2020 at 1:16 AM Sameer Pujar <spujar@xxxxxxxxxx> wrote:
>
>
> >> Add YAML schema for Tegra audio graph sound card DT bindings. It uses the
> >> same DT bindings provided by generic audio graph driver. Along with this
> >> few standard clock DT bindings are added which are specifically required
> >> for Tegra audio.
> >>
> >> Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
> >> ---
> >>   .../sound/nvidia,tegra-audio-graph-card.yaml       | 158 +++++++++++++++++++++
> >>   1 file changed, 158 insertions(+)
> >>   create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
> >> new file mode 100644
> >> index 0000000..284d185
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
> >> @@ -0,0 +1,158 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-graph-card.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Audio Graph based Tegra sound card driver
> >> +
> >> +description: |
> >> +  This is based on generic audio graph card driver along with additional
> >> +  customizations for Tegra platforms. It uses the same bindings with
> >> +  additional standard clock DT bindings required for Tegra.
> >> +
> >> +  See{LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> > You should be able to just $ref this at the top level.
>
> I am seeing one problem while using $ref like below.
> allOf:
>    - $ref: /schemas/sound/audio-graph-card.yaml
>
> I see below while running doc validator.
> "Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.example.dt.yaml:
> tegra_sound: compatible:0: 'audio-graph-card' was expected"
>
> Is there a way to avoid this?

Adjust the schemas so the constraints match. You can't say it must be
one thing in one place and something else here. Your choices are:

- Drop compatible from audio-graph-card.yaml. You can define a 2nd
schema that references audio-graph-card.yaml and defines the
compatible.
- Use 'contains' in audio-graph-card.yaml and then make
'audio-graph-card' a fallback here.

The best option depends on what existing users have.

> >> +maintainers:
> >> +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> >> +  - Sameer Pujar <spujar@xxxxxxxxxx>
> >> +
> >> +properties:
> >> +  compatible:
> >> +    items:
> >> +      - enum:
> >> +          - nvidia,tegra210-audio-graph-card
> >> +          - nvidia,tegra186-audio-graph-card
> >> +
>
> >> +  dais:
> >> +    $ref: /schemas/sound/audio-graph-card.yaml#/properties/dais
> >> +
> >> +  label:
> >> +    $ref: /schemas/sound/simple-card.yaml#/properties/label
> >> +
> >> +  pa-gpios:
> >> +    $ref: /schemas/sound/audio-graph-card.yaml#/properties/pa-gpios
> >> +
> >> +  widgets:
> >> +    $ref: /schemas/sound/simple-card.yaml#/definitions/widgets
> >> +
> >> +  routing:
> >> +    $ref: /schemas/sound/simple-card.yaml#/definitions/routing
> >> +
> >> +  mclk-fs:
> >> +    $ref: /schemas/sound/simple-card.yaml#/definitions/mclk-fs
> >> +
> >> +  prefix:
> >> +    $ref: /schemas/sound/simple-card.yaml#/definitions/prefix
> > And drop all of these.
>
> Could not re-use because of above compatible problem. Also require some
> additional properties for Tegra.
>
> >> +
> >> +  clocks:
> >> +   minItems: 2
> >> +
> >> +  clock-names:
> >> +   minItems: 2
> > Don't need this.
>
> This is required for Tegra audio graph card to update clock rates at
> runtime.

I mean you can drop 'minItems: 2' as it is redundant. The 'items' list
size implies the size.

> >> +   items:
> >> +     - const: pll_a
> >> +     - const: plla_out0
> >> +
> >> +  assigned-clocks:
> >> +    minItems: 1
> >> +    maxItems: 3
> >> +
> >> +  assigned-clock-parents:
> >> +    minItems: 1
> >> +    maxItems: 3
> >> +
> >> +  assigned-clock-rates:
> >> +    minItems: 1
> >> +    maxItems: 3
> >> +
>
> It is required for initialisation of above clocks with specific rates.
>
> >> +  ports:
> >> +    $ref: /schemas/sound/audio-graph-card.yaml#/properties/ports
> >> +
> >> +patternProperties:
> >> +  "^port(@[0-9a-f]+)?$":
> >> +    $ref: /schemas/sound/audio-graph-card.yaml#/definitions/port
> > And these can be dropped. Unless what each port is is Tegra specific.
>
> May be I can drop this if I could just directly include
> audio-graph-card.yaml and extend required properties for Tegra.

There are numerous examples of doing that.

Rob



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux