On 10/19/20 10:58 AM, Keith Tzneg wrote:
From: Keith Tzeng <keith.tzeng@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Machine driver to enable RT5682 on SSP0, DMIC, HDMI and RT1015 AMP on
SSP1: Enabled 4 CH TDM playback with 24 bit data.
Signed-off-by: Keith Tzeng <keith.tzeng@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
sound/soc/intel/boards/Kconfig | 17 +
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/cml_rt1015_rt5682.c | 570 ++++++++++++++++++++++
sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 7 +
4 files changed, 596 insertions(+)
create mode 100644 sound/soc/intel/boards/cml_rt1015_rt5682.c
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index c10c378..9331d0a 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -496,6 +496,23 @@ config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH
Say Y if you have such a device.
If unsure select "N".
+config SND_SOC_INTEL_SOF_RT5682_MACH
+ tristate "SOF with rt5682 codec in I2S Mode"
+ depends on I2C && ACPI && GPIOLIB
+ depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\
+ (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
+ (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
+ select SND_SOC_MAX98373_I2C
+ select SND_SOC_RT1015
+ select SND_SOC_RT5682_I2C
+ select SND_SOC_DMIC
+ select SND_SOC_HDAC_HDMI
+ help
+ This adds support for ASoC machine driver for SOF platforms
+ with rt5682 codec.
+ Say Y if you have such a device.
+ If unsure select "N".
+
This is duplicating an existing config
if SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
config SND_SOC_INTEL_SOF_RT5682_MACH
tristate "SOF with rt5682 codec in I2S Mode"
depends on I2C && ACPI && GPIOLIB
What you would need is to add
select SND_SOC_RT1015
to the existing config, not duplicate it.
endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK
if SND_SOC_SOF_JASPERLAKE
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index a58e4d2..73131cc 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -20,6 +20,7 @@ snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o
snd-soc-cml_rt1011_rt5682-objs := cml_rt1011_rt5682.o hda_dsp_common.o
+snd-soc-cml_rt1015_rt5682-objs := cml_rt1015_rt5682.o
snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o
snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH) += snd-soc-sst-byt-cht-es8316.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o
obj-$(CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH) += snd-soc-cml_rt1011_rt5682.o
+obj-$(CONFIG_SND_SOC_INTEL_SOF_CML_RT1015_RT5682_MACH) += cml_rt1015_rt5682.o
But here you are using a config that was never defined.
And as I said in my previous email, please consider reusing an existing
machine driver rather than adding a new one just to use rt1011 to rt1015.
obj-$(CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH) += snd-soc-kbl_da7219_max98357a.o
obj-$(CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH) += snd-soc-kbl_da7219_max98927.o
obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH) += snd-soc-kbl_rt5663_max98927.o
diff --git a/sound/soc/intel/boards/cml_rt1015_rt5682.c b/sound/soc/intel/boards/cml_rt1015_rt5682.c
new file mode 100644
index 0000000..bf18830
--- /dev/null
+++ b/sound/soc/intel/boards/cml_rt1015_rt5682.c
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright(c) 2019 Intel Corporation.
+
+/*
+ * Intel Cometlake I2S Machine driver for RT1015 + RT5682 codec
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
+#include <linux/acpi.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/rt5682.h>
+#include <sound/soc-acpi.h>
+#include "../../codecs/rt1015.h"
+#include "../../codecs/rt5682.h"
+#include "../../codecs/hdac_hdmi.h"
+
+/* The platform clock outputs 24Mhz clock to codec as I2S MCLK */
+#define CML_PLAT_CLK 24000000
+#define CML_RT1015_CODEC_DAI "rt1015-aif"
+#define CML_RT5682_CODEC_DAI "rt5682-aif1"
+#define NAME_SIZE 32
+
+#define SOF_RT1015_SPEAKER_WL BIT(0)
+#define SOF_RT1015_SPEAKER_WR BIT(1)
+#define SOF_RT1015_SPEAKER_TL BIT(2)
+#define SOF_RT1015_SPEAKER_TR BIT(3)
+#define SPK_CH 4
+
+/* Default: Woofer speakers */
+static unsigned long sof_rt1015_quirk = SOF_RT1015_SPEAKER_WL |
+ SOF_RT1015_SPEAKER_WR;
+
+static int sof_rt1015_quirk_cb(const struct dmi_system_id *id)
+{
+ sof_rt1015_quirk = (unsigned long)id->driver_data;
+ return 1;
+}
+
+static const struct dmi_system_id sof_rt1015_quirk_table[] = {
+ {
+ .callback = sof_rt1015_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Google"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Helios"),
+ },
+ .driver_data = (void *)(SOF_RT1015_SPEAKER_WL | SOF_RT1015_SPEAKER_WR |
+ SOF_RT1015_SPEAKER_TL | SOF_RT1015_SPEAKER_TR),
+ },
+ {
+ }
+};
in cml_rt1011_rt5682.c, we already have:
static const struct dmi_system_id sof_rt1011_quirk_table[] = {
{
.callback = sof_rt1011_quirk_cb,
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Google"),
DMI_MATCH(DMI_PRODUCT_NAME, "Helios"),
},
.driver_data = (void *)(SOF_RT1011_SPEAKER_WL | SOF_RT1011_SPEAKER_WR |
SOF_RT1011_SPEAKER_TL | SOF_RT1011_SPEAKER_TR),
},
{
}
};
Can someone explain how the same "Helios" product can have DMI identical
quirks pointing to different amplifiers? this really begs the question
on what PRODUCT_NAME means. I would expect DMI quirks to be unique, not
match in different drivers as suggested.
NAK on this version. Please don't copy-paste like this.