When using the I2S, LEFT_J, or RIGHT_J format, the hardware supports
independent BCLK and LRCK inversion control. When using DSP_A or DSP_B,
LRCK inversion is not supported. The register bit is repurposed to
select between DSP_A and DSP_B. Extend the driver to support this.
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---
sound/soc/sunxi/sun8i-codec.c | 61 ++++++++++++++++++++++-------------
1 file changed, 39 insertions(+), 22 deletions(-)
diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 53c9289a4249..77eb0fd01e3d 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -39,18 +39,17 @@
#define SUN8I_MOD_RST_CTL_AIF1 15
#define SUN8I_MOD_RST_CTL_ADC 3
#define SUN8I_MOD_RST_CTL_DAC 2
#define SUN8I_SYS_SR_CTRL 0x018
#define SUN8I_SYS_SR_CTRL_AIF1_FS 12
#define SUN8I_SYS_SR_CTRL_AIF2_FS 8
#define SUN8I_AIF1CLK_CTRL 0x040
#define SUN8I_AIF1CLK_CTRL_AIF1_MSTR_MOD 15
-#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV 14
-#define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_INV 13
+#define SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV 13
#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV 9
#define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV 6
#define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ 4
#define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_16 (1 << 4)
#define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT 2
#define SUN8I_AIF1_ADCDAT_CTRL 0x044
#define SUN8I_AIF1_ADCDAT_CTRL_AIF1_AD0L_ENA 15
#define SUN8I_AIF1_ADCDAT_CTRL_AIF1_AD0R_ENA 14
@@ -85,16 +84,17 @@
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF1DA1R 10
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF2DACR 9
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_ADCR 8
#define SUN8I_SYSCLK_CTL_AIF1CLK_SRC_MASK GENMASK(9, 8)
#define SUN8I_SYSCLK_CTL_AIF2CLK_SRC_MASK GENMASK(5, 4)
#define SUN8I_SYS_SR_CTRL_AIF1_FS_MASK GENMASK(15, 12)
#define SUN8I_SYS_SR_CTRL_AIF2_FS_MASK GENMASK(11, 8)
+#define SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV_MASK GENMASK(14, 13)
#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK GENMASK(12, 9)
#define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK GENMASK(8, 6)
#define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK GENMASK(5, 4)
#define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK GENMASK(3, 2)
enum {
SUN8I_CODEC_AIF1,
SUN8I_CODEC_NAIFS
@@ -168,17 +168,17 @@ static int sun8i_codec_get_hw_rate(struct snd_pcm_hw_params *params)
default:
return -EINVAL;
}
}
static int sun8i_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct sun8i_codec *scodec = snd_soc_dai_get_drvdata(dai);
- u32 format, value;
+ u32 dsp_format, format, invert, value;
/* clock masters */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS: /* Codec slave, DAI master */
value = 0x1;
break;
case SND_SOC_DAIFMT_CBM_CFM: /* Codec Master, DAI slave */
value = 0x0;
@@ -197,55 +197,72 @@ static int sun8i_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
break;
case SND_SOC_DAIFMT_LEFT_J:
format = 0x1;
break;
case SND_SOC_DAIFMT_RIGHT_J:
format = 0x2;
break;
case SND_SOC_DAIFMT_DSP_A:
+ format = 0x3;
+ dsp_format = 0x0; /* Set LRCK_INV to 0 */
+ break;
case SND_SOC_DAIFMT_DSP_B:
format = 0x3;
+ dsp_format = 0x1; /* Set LRCK_INV to 1 */
break;
default:
return -EINVAL;
}
regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK,
format << SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT);
/* clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF: /* Normal */
- value = 0x0;
+ invert = 0x0;
break;
- case SND_SOC_DAIFMT_IB_IF: /* Inversion */
- value = 0x1;
+ case SND_SOC_DAIFMT_NB_IF: /* Inverted LRCK */
+ invert = 0x1;
+ break;
+ case SND_SOC_DAIFMT_IB_NF: /* Inverted BCLK */
+ invert = 0x2;
+ break;
+ case SND_SOC_DAIFMT_IB_IF: /* Both inverted */
+ invert = 0x3;
break;
default:
return -EINVAL;
}
- regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
- BIT(SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV),
- value << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV);
- /*
- * It appears that the DAI and the codec in the A33 SoC don't
- * share the same polarity for the LRCK signal when they mean
- * 'normal' and 'inverted' in the datasheet.
- *
- * Since the DAI here is our regular i2s driver that have been
- * tested with way more codecs than just this one, it means
- * that the codec probably gets it backward, and we have to
- * invert the value here.
- */
- value ^= scodec->quirks->lrck_inversion;
+ if (format == 0x3) {
+ /* Inverted LRCK is not available in DSP mode. */
+ if (invert & BIT(0))
+ return -EINVAL;
+
+ /* Instead, the bit selects between DSP A/B formats. */
+ invert |= dsp_format;
+ } else {
+ /*
+ * It appears that the DAI and the codec in the A33 SoC don't
+ * share the same polarity for the LRCK signal when they mean
+ * 'normal' and 'inverted' in the datasheet.
+ *
+ * Since the DAI here is our regular i2s driver that have been
+ * tested with way more codecs than just this one, it means
+ * that the codec probably gets it backward, and we have to
+ * invert the value here.
+ */
+ invert ^= scodec->quirks->lrck_inversion;
+ }
+
regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
- BIT(SUN8I_AIF1CLK_CTRL_AIF1_LRCK_INV),
- value << SUN8I_AIF1CLK_CTRL_AIF1_LRCK_INV);
+ SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV_MASK,
+ invert << SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV);
return 0;
}
struct sun8i_codec_clk_div {
u8 div;
u8 val;
};
--
2.26.2
