On Mon, 2008-01-14 at 17:11 +0000, De Fuuss wrote: > The jumper is now set to enable onboard (Intel HDA) audio. > At the back of the barebone there are 5 jacks (4 channels for 7.1 and 1 line in channel) + 1 spdif out. > From these, using 6stack-hp, only the "Front L/R" jack works, none of the others > On the front, there are 2 jacks (1 headphones and 1 microphone). The headphone jack works. > Can you tell us how you did the testing? >From the driver code, it's not likely that all other jacks don't work. Because the driver support up-mixing, you can play a 2-channel music and get sound from 4 jacks on the back panel. I read the dmesg output that you sent to me. But there is no alsa debug info in it. Did you really configure the driver with the option "--with-debug=detect"? If not, please try it and paste the dmesg info, it is helpful to trace the issue. Best regards! Jiang,zhe > All the channels have been set to 100% in alsamixer. > > Considering that a week ago I had 0.0 and today I'm at 2.0, it's already a improvement. ;-) > > Patrick > > > Subject: Re: intel-hd on an intel G33 motherboard > > From: zhe.jiang@xxxxxxxxx > > To: fuuss@xxxxxxxxxxx > > CC: cmatsuoka@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx > > Date: Mon, 14 Jan 2008 16:43:00 +0800 > > > > On Mon, 2008-01-14 at 02:06 +0800, De Fuuss wrote: > >> > >> Following your advice, I tested per channel output. Using either > >> 6stack-dig or 6stack-hp, I get noise from Front Left and Right jacks, > >> using speaker-test (X=1 and 2) but not on any other channels. > > > > Hi, > > Did you mean that after you changed the 'Jumper', > > you could get the sound from the Front jack on the back channel? > > > >> Patrick > >> > >>> Date: Sun, 13 Jan 2008 01:01:50 -0200 > >>> From: cmatsuoka@xxxxxxxxx > >>> To: fuuss@xxxxxxxxxxx > >>> CC: zhe.jiang@xxxxxxxxx; alsa-devel@xxxxxxxxxxxxxxxx > >>> Subject: Re: intel-hd on an intel G33 motherboard > >>> > >>> 2008/1/12 De Fuuss : > >>> > >>>> I get the uneasy feeling that something is messed up with this > >> board. Anyway, for completeness' sake, I attached the results of > >> amixer contents, cat /proc/asound/card0/codec#0 and dmesg for the > >> module loaded as 6stack-dig. I have to try 6stack-hp again to confirm > >> if I get something there. > >>> > >>> I fixed the Inspiron output, and I'm adding the SG33G5M codec to the > >>> codecgraph codecs collection (git repository at > >>> http://helllabs.org/git/codecgraph.git). If nodes 0x14, 0x15, 0x16 > >> and > >>> 0x17 are the front, rear, clfe and side connectors in the back > >> panel, > >>> 6stack-hp should work (at least for the outputs). You can test the > >>> outputs using "speaker-test -Dplug:surround71 -c8 -sX" (where X > >> varies > >>> from 1 to 8) and a pair of headphones. > >>> _______________________________________________ > >>> Alsa-devel mailing list > >>> Alsa-devel@xxxxxxxxxxxxxxxx > >>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > >> > >> _________________________________________________________________ > >> Express yourself instantly with MSN Messenger! Download today it's > >> FREE! > >> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > >> _______________________________________________ > >> Alsa-devel mailing list > >> Alsa-devel@xxxxxxxxxxxxxxxx > >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > >> > >> > > > > _________________________________________________________________ > Express yourself instantly with MSN Messenger! Download today it's FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
