RE: [PATCH v2 1/6] Add ancillary bus support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
> Sent: Thursday, October 8, 2020 3:20 AM
> 
> 
> On 10/7/20 4:22 PM, Ertman, David M wrote:
> >> -----Original Message-----
> >> From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
> >> Sent: Wednesday, October 7, 2020 1:59 PM
> >> To: Ertman, David M <david.m.ertman@xxxxxxxxx>; Parav Pandit
> >> <parav@xxxxxxxxxx>; Leon Romanovsky <leon@xxxxxxxxxx>
> >> Cc: alsa-devel@xxxxxxxxxxxxxxxx; parav@xxxxxxxxxxxx; tiwai@xxxxxxx;
> >> netdev@xxxxxxxxxxxxxxx; ranjani.sridharan@xxxxxxxxxxxxxxx;
> >> fred.oh@xxxxxxxxxxxxxxx; linux-rdma@xxxxxxxxxxxxxxx;
> >> dledford@xxxxxxxxxx; broonie@xxxxxxxxxx; Jason Gunthorpe
> >> <jgg@xxxxxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx; kuba@xxxxxxxxxx;
> >> Williams, Dan J <dan.j.williams@xxxxxxxxx>; Saleem, Shiraz
> >> <shiraz.saleem@xxxxxxxxx>; davem@xxxxxxxxxxxxx; Patil, Kiran
> >> <kiran.patil@xxxxxxxxx>
> >> Subject: Re: [PATCH v2 1/6] Add ancillary bus support
> >>
> >>
> >>
> >>>> Below is most simple, intuitive and matching with core APIs for
> >>>> name and design pattern wise.
> >>>> init()
> >>>> {
> >>>> 	err = ancillary_device_initialize();
> >>>> 	if (err)
> >>>> 		return ret;
> >>>>
> >>>> 	err = ancillary_device_add();
> >>>> 	if (ret)
> >>>> 		goto err_unwind;
> >>>>
> >>>> 	err = some_foo();
> >>>> 	if (err)
> >>>> 		goto err_foo;
> >>>> 	return 0;
> >>>>
> >>>> err_foo:
> >>>> 	ancillary_device_del(adev);
> >>>> err_unwind:
> >>>> 	ancillary_device_put(adev->dev);
> >>>> 	return err;
> >>>> }
> >>>>
> >>>> cleanup()
> >>>> {
> >>>> 	ancillary_device_de(adev);
> >>>> 	ancillary_device_put(adev);
> >>>> 	/* It is common to have a one wrapper for this as
> >>>> ancillary_device_unregister().
> >>>> 	 * This will match with core device_unregister() that has precise
> >>>> documentation.
> >>>> 	 * but given fact that init() code need proper error unwinding,
> >>>> like above,
> >>>> 	 * it make sense to have two APIs, and no need to export another
> >>>> symbol for unregister().
> >>>> 	 * This pattern is very easy to audit and code.
> >>>> 	 */
> >>>> }
> >>>
> >>> I like this flow +1
> >>>
> >>> But ... since the init() function is performing both device_init and
> >>> device_add - it should probably be called ancillary_device_register,
> >>> and we are back to a single exported API for both register and
> >>> unregister.
> >>
> >> Kind reminder that we introduced the two functions to allow the
> >> caller to know if it needed to free memory when initialize() fails,
> >> and it didn't need to free memory when add() failed since
> >> put_device() takes care of it. If you have a single init() function
> >> it's impossible to know which behavior to select on error.
> >>
> >> I also have a case with SoundWire where it's nice to first
> >> initialize, then set some data and then add.
> >>
> >
> > The flow as outlined by Parav above does an initialize as the first
> > step, so every error path out of the function has to do a
> > put_device(), so you would never need to manually free the memory in
> the setup function.
> > It would be freed in the release call.
> 
> err = ancillary_device_initialize();
> if (err)
> 	return ret;
> 
> where is the put_device() here? if the release function does any sort of
> kfree, then you'd need to do it manually in this case.
Since device_initialize() failed, put_device() cannot be done here.
So yes, pseudo code should have shown,
if (err) {
	kfree(adev);
	return err;
}

If we just want to follow register(), unregister() pattern,

Than,

ancillar_device_register() should be,

/**
 * ancillar_device_register() - register an ancillary device
 * NOTE: __never directly free @adev after calling this function, even if it returned
 * an error. Always use ancillary_device_put() to give up the reference initialized by this function.
 * This note matches with the core and caller knows exactly what to be done.
 */
ancillary_device_register()
{
	device_initialize(&adev->dev);
	if (!dev->parent || !adev->name)
		return -EINVAL;
	if (!dev->release && !(dev->type && dev->type->release)) {
		/* core is already capable and throws the warning when release callback is not set.
		 * It is done at drivers/base/core.c:1798.
		 * For NULL release it says, "does not have a release() function, it is broken and must be fixed"
		 */
		return -EINVAL;
	}
	err = dev_set_name(adev...);
	if (err) {
		/* kobject_release() -> kobject_cleanup() are capable to detect if name is set/ not set
		  * and free the const if it was set.
		  */
		return err;
	}
	err = device_add(&adev->dev);
	If (err)
		return err;
}

Caller code:
init()
{
	adev = kzalloc(sizeof(*foo_adev)..);
	if (!adev)
		return -ENOMEM;
	err = ancillary_device_register(&adev);
	if (err)
		goto err;

err:
	ancillary_device_put(&adev);
	return err;
}

cleanup()
{
	ancillary_device_unregister(&adev);
}

Above pattern is fine too matching the core.

If I understand Leon correctly, he prefers simple register(), unregister() pattern.
If, so it should be explicit register(), unregister() API.

However I read that Pierre mentioned that SoundWire prefers initialize(), some_data_init(), add() pattern.
If SoundWire cannot do register() pattern,
So, whichever first user bundled with the patchset, those APIs should be exported, because we don’t add an API without a user.

Pierre, 
Can you please check if SoundWire can follow register() pattern?

Assuming Leon patches and my patches for subfunction arrive after Soundwire series + ancillary bus,
we can add the register() and unregister() version in our patchset later.

Greg already said that "it's not carved on stone, we can do incremental additions as the need arise".
So I think we should proceed with the wrappers which follow the core convention of 
either 
(a) initialize)(), add() or 
(b) register(), unregister().




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux