Re: [PATCH 11/25] ASoC: sun8i-codec: Enable all supported clock inversions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 30, 2020 at 09:11:34PM -0500, Samuel Holland wrote:
> When using the I2S, LEFT_J, or RIGHT_J format, the hardware supports
> independent BCLK and LRCK inversion control. When using DSP_A or DSP_B,
> LRCK inversion is not supported. The register bit is repurposed to
> select between DSP_A and DSP_B. Extend the driver to support this.
> 
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> ---
>  sound/soc/sunxi/sun8i-codec.c | 57 +++++++++++++++++++++++------------
>  1 file changed, 37 insertions(+), 20 deletions(-)
> 
> diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
> index 0b713b2a2028..506420fb355c 100644
> --- a/sound/soc/sunxi/sun8i-codec.c
> +++ b/sound/soc/sunxi/sun8i-codec.c
> @@ -39,18 +39,17 @@
>  #define SUN8I_MOD_RST_CTL_AIF1				15
>  #define SUN8I_MOD_RST_CTL_ADC				3
>  #define SUN8I_MOD_RST_CTL_DAC				2
>  #define SUN8I_SYS_SR_CTRL				0x018
>  #define SUN8I_SYS_SR_CTRL_AIF1_FS			12
>  #define SUN8I_SYS_SR_CTRL_AIF2_FS			8
>  #define SUN8I_AIF1CLK_CTRL				0x040
>  #define SUN8I_AIF1CLK_CTRL_AIF1_MSTR_MOD		15
> -#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV		14
> -#define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_INV		13
> +#define SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV			13
>  #define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV		9
>  #define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV		6
>  #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ		4
>  #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_16		(1 << 4)
>  #define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT		2
>  #define SUN8I_AIF1_ADCDAT_CTRL				0x044
>  #define SUN8I_AIF1_ADCDAT_CTRL_AIF1_AD0L_ENA		15
>  #define SUN8I_AIF1_ADCDAT_CTRL_AIF1_AD0R_ENA		14
> @@ -85,16 +84,17 @@
>  #define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF1DA1R		10
>  #define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF2DACR		9
>  #define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_ADCR		8
>  
>  #define SUN8I_SYSCLK_CTL_AIF1CLK_SRC_MASK	GENMASK(9, 8)
>  #define SUN8I_SYSCLK_CTL_AIF2CLK_SRC_MASK	GENMASK(5, 4)
>  #define SUN8I_SYS_SR_CTRL_AIF1_FS_MASK		GENMASK(15, 12)
>  #define SUN8I_SYS_SR_CTRL_AIF2_FS_MASK		GENMASK(11, 8)
> +#define SUN8I_AIF1CLK_CTRL_AIF1_CLK_INV_MASK	GENMASK(14, 13)
>  #define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK	GENMASK(12, 9)
>  #define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK	GENMASK(8, 6)
>  #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK	GENMASK(5, 4)
>  #define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK	GENMASK(3, 2)
>  
>  enum {
>  	AIF1,
>  	NAIFS
> @@ -168,17 +168,17 @@ static int sun8i_codec_get_hw_rate(struct snd_pcm_hw_params *params)
>  	default:
>  		return -EINVAL;
>  	}
>  }
>  
>  static int sun8i_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
>  {
>  	struct sun8i_codec *scodec = snd_soc_dai_get_drvdata(dai);
> -	u32 format, value;
> +	u32 format, invert, value;
>  
>  	/* clock masters */
>  	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
>  	case SND_SOC_DAIFMT_CBS_CFS: /* Codec slave, DAI master */
>  		value = 0x1;
>  		break;
>  	case SND_SOC_DAIFMT_CBM_CFM: /* Codec Master, DAI slave */
>  		value = 0x0;
> @@ -197,55 +197,72 @@ static int sun8i_codec_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
>  		break;
>  	case SND_SOC_DAIFMT_LEFT_J:
>  		format = 0x1;
>  		break;
>  	case SND_SOC_DAIFMT_RIGHT_J:
>  		format = 0x2;
>  		break;
>  	case SND_SOC_DAIFMT_DSP_A:
> +		format = 0x3;
> +		invert = 0x0; /* Set LRCK_INV to 0 */
> +		break;
>  	case SND_SOC_DAIFMT_DSP_B:
>  		format = 0x3;
> +		invert = 0x1; /* Set LRCK_INV to 1 */
>  		break;
>  	default:
>  		return -EINVAL;
>  	}
>  	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
>  			   SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK,
>  			   format << SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT);
>  
>  	/* clock inversion */
>  	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>  	case SND_SOC_DAIFMT_NB_NF: /* Normal */
>  		value = 0x0;
>  		break;
> -	case SND_SOC_DAIFMT_IB_IF: /* Inversion */
> +	case SND_SOC_DAIFMT_NB_IF: /* Inverted LRCK */
>  		value = 0x1;
>  		break;
> +	case SND_SOC_DAIFMT_IB_NF: /* Inverted BCLK */
> +		value = 0x2;
> +		break;
> +	case SND_SOC_DAIFMT_IB_IF: /* Both inverted */
> +		value = 0x3;
> +		break;
>  	default:
>  		return -EINVAL;
>  	}
> -	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
> -			   BIT(SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV),
> -			   value << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_INV);
>  
> -	/*
> -	 * It appears that the DAI and the codec in the A33 SoC don't
> -	 * share the same polarity for the LRCK signal when they mean
> -	 * 'normal' and 'inverted' in the datasheet.
> -	 *
> -	 * Since the DAI here is our regular i2s driver that have been
> -	 * tested with way more codecs than just this one, it means
> -	 * that the codec probably gets it backward, and we have to
> -	 * invert the value here.
> -	 */
> -	value ^= scodec->quirks->lrck_inversion;
> +	if (format == 0x3) {

Could we use a define here? That would be more readable

> +		/* Inverted LRCK is not available in DSP mode. */
> +		if (value & BIT(0))
> +			return -EINVAL;

And same thing here, explicitly testing both for DSP_A and DSP_B would
be more readable.

(And I guess value isn't such a great variable name anymore either)

Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux