On Tue, 08 Sep 2020 16:59:54 +0200, Krzysztof Kozlowski wrote: > GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. > These are simple defines so they could be used in DTS but they will not > have the same meaning: > 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE > 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING > > Correct the interrupt flags, assuming the author of the code wanted some > logical behavior behind the name "ACTIVE_xxx", this is: > ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/sound/max98090.txt | 2 +- > Documentation/devicetree/bindings/sound/rt5640.txt | 2 +- > Documentation/devicetree/bindings/sound/rt5659.txt | 2 +- > Documentation/devicetree/bindings/sound/rt5665.txt | 2 +- > Documentation/devicetree/bindings/sound/rt5668.txt | 2 +- > Documentation/devicetree/bindings/sound/rt5677.txt | 2 +- > Documentation/devicetree/bindings/sound/rt5682.txt | 2 +- > 7 files changed, 7 insertions(+), 7 deletions(-) > Acked-by: Rob Herring <robh@xxxxxxxxxx>
