Current code expects a single channel to be always used. Fix this
situation by forwarding the number of channels used. Then fix the
derivation of the bdiv clock rate.
Fixes: 96c3bb00239d ("ASoC: tlv320aic32x4: Dynamically Determine Clocking")
Suggested-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
sound/soc/codecs/tlv320aic32x4.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index 68165de1c8de..7a1ffbaf48be 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -662,7 +662,7 @@ static int aic32x4_set_processing_blocks(struct snd_soc_component *component,
}
static int aic32x4_setup_clocks(struct snd_soc_component *component,
- unsigned int sample_rate)
+ unsigned int sample_rate, unsigned int channels)
{
u8 aosr;
u16 dosr;
@@ -750,7 +750,9 @@ static int aic32x4_setup_clocks(struct snd_soc_component *component,
dosr);
clk_set_rate(clocks[5].clk,
- sample_rate * 32);
+ sample_rate * 32 *
+ channels);
+
return 0;
}
}
@@ -772,7 +774,8 @@ static int aic32x4_hw_params(struct snd_pcm_substream *substream,
u8 iface1_reg = 0;
u8 dacsetup_reg = 0;
- aic32x4_setup_clocks(component, params_rate(params));
+ aic32x4_setup_clocks(component, params_rate(params),
+ params_channels(params));
switch (params_width(params)) {
case 16:
--
2.20.1
