From: Camel Guo <camelg@xxxxxxxx> According to its datasheet, after reset this codec goes into sleep mode. In this mode, any register accessing should be avoided except for exiting sleep mode. Hence this commit moves SLEEP_CFG access before any register accessing. Signed-off-by: Camel Guo <camelg@xxxxxxxx> --- sound/soc/codecs/tlv320adcx140.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 597dd1062943..6d456aa269ad 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -842,6 +842,18 @@ static int adcx140_codec_probe(struct snd_soc_component *component) if (ret) goto out; + if (adcx140->supply_areg == NULL) + sleep_cfg_val |= ADCX140_AREG_INTERNAL; + + ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val); + if (ret) { + dev_err(adcx140->dev, "setting sleep config failed %d\n", ret); + goto out; + } + + /* 8.4.3: Wait >= 1ms after entering active mode. */ + usleep_range(1000, 100000); + pdm_count = device_property_count_u32(adcx140->dev, "ti,pdm-edge-select"); if (pdm_count <= ADCX140_NUM_PDM_EDGES && pdm_count > 0) { @@ -889,18 +901,6 @@ static int adcx140_codec_probe(struct snd_soc_component *component) if (ret) goto out; - if (adcx140->supply_areg == NULL) - sleep_cfg_val |= ADCX140_AREG_INTERNAL; - - ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG, sleep_cfg_val); - if (ret) { - dev_err(adcx140->dev, "setting sleep config failed %d\n", ret); - goto out; - } - - /* 8.4.3: Wait >= 1ms after entering active mode. */ - usleep_range(1000, 100000); - ret = regmap_update_bits(adcx140->regmap, ADCX140_BIAS_CFG, ADCX140_MIC_BIAS_VAL_MSK | ADCX140_MIC_BIAS_VREF_MSK, bias_cfg); -- 2.20.1