From: František Kučera <franta-linux@xxxxxxxxxxx>
This patch extends support for DJM-250MK2 and allows recording.
However, DVS is not possible yet (see the comment in code).
Signed-off-by: František Kučera <franta-linux@xxxxxxxxxxx>
---
sound/usb/pcm.c | 1 +
sound/usb/quirks-table.h | 62 ++++++++++++++++++++++++++++++++++------
sound/usb/quirks.c | 1 +
3 files changed, 56 insertions(+), 8 deletions(-)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 5600751803cf..f5fa11deea4d 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -374,6 +374,7 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs,
ifnum = 2;
goto add_sync_ep_from_ifnum;
case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */
+ case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */
ep = 0x82;
ifnum = 0;
goto add_sync_ep_from_ifnum;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index f4fb002e3ef4..c6b2f0b8d3e2 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3549,14 +3549,40 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
{
/*
* Pioneer DJ DJM-250MK2
- * PCM is 8 channels out @ 48 fixed (endpoints 0x01).
- * The output from computer to the mixer is usable.
- *
- * The input (phono or line to computer) is not working.
- * It should be at endpoint 0x82 and probably also 8 channels,
- * but it seems that it works only with Pioneer proprietary software.
- * Even on officially supported OS, the Audacity was unable to record
- * and Mixxx to recognize the control vinyls.
+ * PCM is 8 channels out @ 48 fixed (endpoint 0x01)
+ * and 8 channels in @ 48 fixed (endpoint 0x82).
+ *
+ * Both playback and recording is working, even simultaneously.
+ *
+ * Playback channels could be mapped to:
+ * - CH1
+ * - CH2
+ * - AUX
+ *
+ * Recording channels could be mapped to:
+ * - Post CH1 Fader
+ * - Post CH2 Fader
+ * - Cross Fader A
+ * - Cross Fader B
+ * - MIC
+ * - AUX
+ * - REC OUT
+ *
+ * There is remaining problem with recording directly from PHONO/LINE.
+ * If we map a channel to:
+ * - CH1 Control Tone PHONO
+ * - CH1 Control Tone LINE
+ * - CH2 Control Tone PHONO
+ * - CH2 Control Tone LINE
+ * it is silent.
+ * There is no signal even on other operating systems with official drivers.
+ * The signal appears only when a supported application is started.
+ * This needs to be investigated yet...
+ * (there is quite a lot communication on the USB in both directions)
+ *
+ * In current version this mixer could be used for playback
+ * and for recording from vinyls (through Post CH* Fader)
+ * but not for DVS (Digital Vinyl Systems) like in Mixxx.
*/
USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017),
.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
@@ -3580,6 +3606,26 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
.rate_max = 48000,
.nr_rates = 1,
.rate_table = (unsigned int[]) { 48000 }
+ }
+ },
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 8, // inputs
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC|
+ USB_ENDPOINT_SYNC_ASYNC|
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 }
}
},
{
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index abf99b814a0f..6a0be7e7f4fe 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1493,6 +1493,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
set_format_emu_quirk(subs, fmt);
break;
case USB_ID(0x2b73, 0x000a): /* Pioneer DJ DJM-900NXS2 */
+ case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */
pioneer_djm_set_format_quirk(subs);
break;
case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
--
2.20.1
