Hi, Here's the pastebin information http://pastebin.ca/834640 That was using 3stack-6ch-dig For experimentation's sake: If I use 6stack-dig I get the following http://pastebin.ca/834644 If I use 6stack-hp I get the following http://pastebin.ca/834646 Thanks for helping me out. It would be nice if it worked :-) Patrick > From: tdavis@xxxxxxxxxxxx > To: fuuss@xxxxxxxxxxx > Date: Thu, 27 Dec 2007 20:22:57 -0800 > CC: alsa-devel@xxxxxxxxxxxxxxxx > Subject: Re: intel-hd on an intel G33 motherboard > > Ok, need to step back in the thread a bit. Now that we've established > that this is not an Intel manufactured motherboard (not that they make > their own anymore), I need more detailed information on what the OS > see's. Please run > http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh and post the > link that it generates. This will give me a detailed snapshot of your > hardware that I can use for debugging. > > I will begin working on this as soon as I get this info. I hope to get > you enabled this weekend if possible, this year at the latest. :) > > Thanks, > > Tobin ---------------------------------------- > From: tdavis@xxxxxxxxxxxx > To: fuuss@xxxxxxxxxxx > Date: Thu, 27 Dec 2007 20:22:57 -0800 > CC: alsa-devel@xxxxxxxxxxxxxxxx > Subject: Re: intel-hd on an intel G33 motherboard > > Ok, need to step back in the thread a bit. Now that we've established > that this is not an Intel manufactured motherboard (not that they make > their own anymore), I need more detailed information on what the OS > see's. Please run > http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh and post the > link that it generates. This will give me a detailed snapshot of your > hardware that I can use for debugging. > > I will begin working on this as soon as I get this info. I hope to get > you enabled this weekend if possible, this year at the latest. :) > > Thanks, > > Tobin > > > On Thu, 2007-12-27 at 00:33 +0000, De Fuuss wrote: > >> Hi Tobin, >> >> Thanks for you quick reply. >> >> I tried both 3stack-6ch and 3stack-6ch-dig (the card has a spdif out). I found out that when putting on headphones on a separate headphone jack I get some sound with both settings. Hoever, the front out l/r, center/bass sourround back l/r and side sourround l/r port remain silent. >> >> I set all channels to 80-100% in alsamixer. >> >> A few more details from my setup: >> Shuttle XPC SG33G5M >> Intel G33 Express + ICH9DH >> >> Interestingly, when I run alsamixer, it identifies the Chip as "Generic 1095 ID 1392", in other words in points to codec#1. I thought it should point to codec#0, e.g. RealTek ALC888 >> >> I have the strong impression that the channels are not truly set by alsamixer as they point to the wrong codec. I'm only a layman in ALSA, and I have no idea how to tell alsamixer to consider codec#0 instead codec#1. >> >> Do you have any idea on how to crack this nut? >> >> Below is the output of both codecs: >> >> Thank you. >> >> Best regards, >> >> Patrick >> >> ____________________ >> #cat /proc/asound/cards >> >> 0 [Intel ]: HDA-Intel - HDA Intel >> HDA Intel at 0xfdff8000 irq 22 >> >> # cat /proc/asound/Intel/codec#0 >> Codec: Realtek ALC888 >> Address: 0 >> Vendor Id: 0x10ec0888 >> Subsystem Id: 0x12970888 >> Revision Id: 0x100001 >> No Modem Function Group found >> Default PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0xe]: 16 20 24 >> formats [0x1]: PCM >> Default Amp-In caps: N/A >> Default Amp-Out caps: N/A >> Node 0x02 [Audio Output] wcaps 0x11: Stereo >> PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0xe]: 16 20 24 >> formats [0x1]: PCM >> Node 0x03 [Audio Output] wcaps 0x11: Stereo >> PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0xe]: 16 20 24 >> formats [0x1]: PCM >> Node 0x04 [Audio Output] wcaps 0x11: Stereo >> PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0xe]: 16 20 24 >> formats [0x1]: PCM >> Node 0x05 [Audio Output] wcaps 0x11: Stereo >> PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0xe]: 16 20 24 >> formats [0x1]: PCM >> Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital >> PCM: >> rates [0x5e0]: 44100 48000 88200 96000 192000 >> bits [0x1e]: 16 20 24 32 >> formats [0x1]: PCM >> Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In >> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 >> Amp-In vals: [0x9f 0x9f] >> PCM: >> rates [0x160]: 44100 48000 96000 >> bits [0x6]: 16 20 >> formats [0x1]: PCM >> Connection: 1 >> 0x23 >> Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In >> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 >> Amp-In vals: [0x9f 0x9f] >> PCM: >> rates [0x160]: 44100 48000 96000 >> bits [0x6]: 16 20 >> formats [0x1]: PCM >> Connection: 1 >> 0x22 >> Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital >> PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0x1e]: 16 20 24 32 >> formats [0x1]: PCM >> Connection: 1 >> 0x1f >> Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In >> Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 >> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x9d 0x9d] [0x80 0x80] [0x9f 0x9f] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] >> Connection: 10 >> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 >> Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 >> Amp-Out vals: [0x1d 0x1d] >> Connection: 2 >> 0x02 0x0b >> Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 >> Amp-Out vals: [0x1f 0x1f] >> Connection: 2 >> 0x03 0x0b >> Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 >> Amp-Out vals: [0x1f 0x1f] >> Connection: 2 >> 0x04 0x0b >> Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x80 0x80] [0x80 0x80] >> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 >> Amp-Out vals: [0x00 0x00] >> Connection: 2 >> 0x05 0x0b >> Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x083e: IN OUT HP Detect >> Pin Default 0x01014010: [Jack] Line Out at Ext Rear >> Conn = 1/8, Color = Green >> Pin-ctls: 0x40: OUT >> Connection: 5 >> 0x0c* 0x0d 0x0e 0x0f 0x26 >> Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x083e: IN OUT HP Detect >> Pin Default 0x01011012: [Jack] Line Out at Ext Rear >> Conn = 1/8, Color = Black >> Pin-ctls: 0x40: OUT >> Connection: 5 >> 0x0c 0x0d* 0x0e 0x0f 0x26 >> Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x0836: IN OUT Detect >> Pin Default 0x01016011: [Jack] Line Out at Ext Rear >> Conn = 1/8, Color = Orange >> Pin-ctls: 0x40: OUT >> Connection: 5 >> 0x0c 0x0d 0x0e* 0x0f 0x26 >> Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x0836: IN OUT Detect >> Pin Default 0x01012014: [Jack] Line Out at Ext Rear >> Conn = 1/8, Color = Grey >> Pin-ctls: 0x40: OUT >> Connection: 5 >> 0x0c 0x0d 0x0e 0x0f* 0x26 >> Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x08373e: IN OUT HP Detect >> Pin Default 0x01813040: [Jack] Line In at Ext Rear >> Conn = 1/8, Color = Blue >> Pin-ctls: 0x40: OUT >> Connection: 5 >> 0x0c 0x0d 0x0e* 0x0f 0x26 >> Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x80 0x80] >> Pincap 0x08373e: IN OUT HP Detect >> Pin Default 0x02a19850: [Jack] Mic at Ext Front >> Conn = 1/8, Color = Pink >> Pin-ctls: 0x24: IN >> Connection: 5 >> 0x0c* 0x0d 0x0e 0x0f 0x26 >> Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x08373e: IN OUT HP Detect >> Pin Default 0x9993014f: [Fixed] Aux at Int ATAPI >> Conn = ATAPI, Color = Unknown >> Pin-ctls: 0x40: OUT >> Connection: 5 >> 0x0c 0x0d* 0x0e 0x0f 0x26 >> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x00 0x00] >> Pincap 0x08373e: IN OUT HP Detect >> Pin Default 0x02214020: [Jack] HP Out at Ext Front >> Conn = 1/8, Color = Green >> Pin-ctls: 0xc0: OUT HP >> Connection: 5 >> 0x0c* 0x0d 0x0e 0x0f 0x26 >> Node 0x1c [Pin Complex] wcaps 0x400001: Stereo >> Pincap 0x0820: IN >> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear >> Conn = 1/8, Color = Black >> Pin-ctls: 0x20: IN >> Node 0x1d [Pin Complex] wcaps 0x400000: Mono >> Pincap 0x0820: IN >> Pin Default 0x4005a603: [N/A] Line Out at Ext N/A >> Conn = Optical, Color = UNKNOWN >> Pin-ctls: 0x20: IN >> Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital >> Pincap 0x0810: OUT >> Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear >> Conn = Optical, Color = Black >> Pin-ctls: 0x40: OUT >> Connection: 1 >> 0x06 >> Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital >> Pincap 0x0820: IN >> Pin Default 0x01c59160: [Jack] SPDIF In at Ext Rear >> Conn = Optical, Color = Pink >> Pin-ctls: 0x20: IN >> Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono >> Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] >> Connection: 11 >> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b >> Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] >> Connection: 11 >> 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b >> Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono >> Node 0x25 [Audio Output] wcaps 0x11: Stereo >> PCM: >> rates [0x560]: 44100 48000 96000 192000 >> bits [0xe]: 16 20 24 >> formats [0x1]: PCM >> Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out >> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-In vals: [0x00 0x00] [0x80 0x80] >> Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 >> Amp-Out vals: [0x00 0x00] >> Connection: 2 >> 0x25 0x0b >> >> A second codec sits at /proc/asound/Intel/codec#0. A cat results in: >> >> Codec: Generic 1095 ID 1392 >> Address: 1 >> Vendor Id: 0x10951392 >> Subsystem Id: 0xffffffff >> Revision Id: 0x100000 >> No Modem Function Group found >> Default PCM: >> rates [0x0]: >> bits [0x0]: >> formats [0x0]: >> Default Amp-In caps: N/A >> Default Amp-Out caps: N/A >> Node 0x02 [Audio Output] wcaps 0x6211: Stereo Digital >> PCM: >> rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 >> bits [0x1e]: 16 20 24 32 >> formats [0x5]: PCM AC3 >> Node 0x03 [Pin Complex] wcaps 0x40738d: Stereo Digital Amp-Out >> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 >> Amp-Out vals: [0x80 0x80] >> Pincap 0x0894: OUT Detect >> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI >> Conn = Digital, Color = Unknown >> Pin-ctls: 0x00: >> Connection: 1 >> 0x02 >> >> >>> From: tdavis@xxxxxxxxxxxx >>> To: fuuss@xxxxxxxxxxx >>> Date: Wed, 26 Dec 2007 11:30:28 -0800 >>> CC: alsa-devel@xxxxxxxxxxxxxxxx >>> Subject: Re: intel-hd on an intel G33 motherboard >>> >>> Try "model=3stack-6ch". Also, if you look in the >>> alsa-driver-1.0.15/alsa-kernel/Documentation/Alsa-Configuration.txt >>> file, there are other models you can select for the alc883/888 codec. >>> >>> Let me know if this works and I'll add your system to the driver. >>> >>> Tobin >>> >>> On Wed, 2007-12-26 at 18:42 +0000, De Fuuss wrote: >>> >>>> Hi, >>>> >>>> Maybe I'm missing something, but I've failed to get even the slightest >>>> noise out of the onboard sound card from a Intel G33 motherboard. I >>>> tried the alsa drivers from the alsa-driver-1.0.15 package as well as >>>> the the alsa drivers provided by kernel 2.6.23 (built as modules), to >>>> no avail. >>>> >>>> The sound chip is identified as a Intel HDA / Realtek ALC888 on the Intel G33 ICH9 motherboard. >>>> >>>> After reading some of the documentation from the ALSA site and googling through half the internet I haven't found out yet if this specific sound card is supported by ALSA and if some module options must be passed (such as options snd-intel-hda model=.....). >>>> >>>> Could somebody be so kind as to point me into the right direction? >>>> >>>> Thank you. >>>> >>>> Best regards, >>>> >>>> Patrick >>>> >>>> _________________________________________________________________ >>>> Express yourself instantly with MSN Messenger! Download today it's FREE! >>>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ >>>> _______________________________________________ >>>> Alsa-devel mailing list >>>> Alsa-devel@xxxxxxxxxxxxxxxx >>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >>> >>> -- >>> Tobin Davis >>> >>> >>> TONY RANDALL! Is YOUR life a PATIO of FUN?? >>> _______________________________________________ >>> Alsa-devel mailing list >>> Alsa-devel@xxxxxxxxxxxxxxxx >>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >> >> _________________________________________________________________ >> Express yourself instantly with MSN Messenger! Download today it's FREE! >> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ >> _______________________________________________ >> Alsa-devel mailing list >> Alsa-devel@xxxxxxxxxxxxxxxx >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > > -- > Tobin Davis > > > Authors are easy to get on with -- if you're fond of children. > -- Michael Joseph, "Observer" _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
