Prevent sound/soc/intel/haswell code compile and select catpt instead as a recommended solution. Userspace-exposed members are compatible with what is exposed by deprecated solution thus no harm is done. The only visible difference is the newly added 'Loopback Mute' kcontrol. Signed-off-by: Cezary Rojewski <cezary.rojewski@xxxxxxxxx> --- sound/soc/intel/Kconfig | 22 +++++++++++----------- sound/soc/intel/Makefile | 2 +- sound/soc/intel/boards/Kconfig | 8 ++++---- sound/soc/intel/catpt/Makefile | 6 ++++++ 4 files changed, 22 insertions(+), 16 deletions(-) create mode 100644 sound/soc/intel/catpt/Makefile diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 82805a8681e5..4a18e8f83eeb 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -47,21 +47,21 @@ config SND_SOC_INTEL_SST_FIRMWARE # Haswell/Broadwell/Baytrail legacy and will be set # when these platforms are enabled -config SND_SOC_INTEL_HASWELL - tristate "Haswell/Broadwell Platforms" +config SND_SOC_INTEL_CATPT + tristate "Haswell and Broadwell" depends on SND_DMA_SGBUF depends on DMADEVICES && ACPI - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_ACPI - select SND_SOC_INTEL_SST_FIRMWARE + select DW_DMAC_CORE select SND_SOC_ACPI_INTEL_MATCH help - If you have a Intel Haswell or Broadwell platform connected to - an I2S codec, then enable this option by saying Y or m. This is - typically used for Chromebooks. This is a recommended option. - This option is mutually exclusive with the SOF support on - Broadwell. If you want to enable SOF on Broadwell, you need to - deselect this option first. + Enable support for Intel(R) Haswell and Broadwell platforms + with I2S codec present. This is a recommended option. + Say Y or m if you have such device. + If unsure, say N. + +config SND_SOC_INTEL_HASWELL + tristate + select SND_SOC_INTEL_CATPT config SND_SOC_INTEL_BAYTRAIL tristate "Baytrail (legacy) Platforms" diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile index 04ee48204fc9..c88c615f85f7 100644 --- a/sound/soc/intel/Makefile +++ b/sound/soc/intel/Makefile @@ -3,9 +3,9 @@ obj-$(CONFIG_SND_SOC) += common/ # Platform Support -obj-$(CONFIG_SND_SOC_INTEL_HASWELL) += haswell/ obj-$(CONFIG_SND_SOC_INTEL_BAYTRAIL) += baytrail/ obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += atom/ +obj-$(CONFIG_SND_SOC_INTEL_CATPT) += catpt/ obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE) += skylake/ obj-$(CONFIG_SND_SOC_INTEL_KEEMBAY) += keembay/ diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index d96fc1313434..f4358c33059b 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -26,7 +26,7 @@ config SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES interface. If unsure select N. -if SND_SOC_INTEL_HASWELL +if SND_SOC_INTEL_CATPT config SND_SOC_INTEL_HASWELL_MACH tristate "Haswell Lynxpoint" @@ -40,9 +40,9 @@ config SND_SOC_INTEL_HASWELL_MACH Say Y or m if you have such a device. If unsure select "N". -endif ## SND_SOC_INTEL_HASWELL +endif ## SND_SOC_INTEL_CATPT -if SND_SOC_INTEL_HASWELL || SND_SOC_SOF_BROADWELL +if SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL config SND_SOC_INTEL_BDW_RT5650_MACH tristate "Broadwell with RT5650 codec" @@ -83,7 +83,7 @@ config SND_SOC_INTEL_BROADWELL_MACH Ultrabook platforms. Say Y or m if you have such a device. This is a recommended option. If unsure select "N". -endif ## SND_SOC_INTEL_HASWELL || SND_SOC_SOF_BROADWELL +endif ## SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL if SND_SOC_INTEL_BAYTRAIL diff --git a/sound/soc/intel/catpt/Makefile b/sound/soc/intel/catpt/Makefile new file mode 100644 index 000000000000..0717190106d9 --- /dev/null +++ b/sound/soc/intel/catpt/Makefile @@ -0,0 +1,6 @@ +snd-soc-catpt-objs := device.o dsp.o loader.o ipc.o messages.o pcm.o fs.o + +# tell define_trace.h where to find the trace header +CFLAGS_device.o := -I$(src) + +obj-$(CONFIG_SND_SOC_INTEL_CATPT) += snd-soc-catpt.o -- 2.17.1
