Re: [PATCH v4 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/3/2020 11:52 PM, Rob Herring wrote:
On Mon, Aug 3, 2020 at 2:28 AM Rohit Kumar <rohitkr@xxxxxxxxxxxxxx> wrote:
Thanks Rob for reviewing

On 7/23/2020 10:46 PM, Rob Herring wrote:
On Wed, Jul 22, 2020 at 04:01:55PM +0530, Rohit kumar wrote:
Update lpass-cpu binding with yaml formats.

Signed-off-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
---
   .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 130 ---------------
   .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 185 +++++++++++++++++++++
   2 files changed, 185 insertions(+), 130 deletions(-)
   delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
   create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index c21392e..00000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible                : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
-                      "qcom,lpass-cpu-sc7180"
-- clocks            : Must contain an entry for each entry in clock-names.
-- clock-names               : A list which must include the following entries:
-                            * "ahbix-clk"
-                            * "mi2s-osr-clk"
-                            * "mi2s-bit-clk"
-                    : required clocks for "qcom,lpass-cpu-apq8016"
-                            * "ahbix-clk"
-                            * "mi2s-bit-clk0"
-                            * "mi2s-bit-clk1"
-                            * "mi2s-bit-clk2"
-                            * "mi2s-bit-clk3"
-                            * "pcnoc-mport-clk"
-                            * "pcnoc-sway-clk"
-                    : required clocks for "qcom,lpass-cpu-sc7180"
-                            * "audio-core"
-                            * "mclk0"
-                            * "mi2s-bit-clk0"
-                            * "mi2s-bit-clk1"
-                            * "pcnoc-sway-clk"
-                            * "pcnoc-mport-clk"
-
-- interrupts                : Must contain an entry for each entry in
-                      interrupt-names.
-- interrupt-names   : A list which must include the following entries:
-                            * "lpass-irq-lpaif"
-- pinctrl-N         : One property must exist for each entry in
-                      pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-                      for details of the property values.
-- pinctrl-names             : Must contain a "default" entry.
-- reg                       : Must contain an address for each entry in reg-names.
-- reg-names         : A list which must include the following entries:
-                            * "lpass-lpaif"
-- #address-cells    : Must be 1
-- #size-cells               : Must be 0
-
-
-
-Optional properties:
-
-- qcom,adsp         : Phandle for the audio DSP node
-
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
-The SD lines to use can be configured by adding subnodes for each of the DAIs.
-
-Required properties for each DAI (represented by a subnode):
-- reg                       : Must be one of the DAI IDs
-                      (usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
-                      Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines     : List of serial data lines to use for capture
-                      Each SD line should be represented by a number from 0-3.
-
-Note that adding a subnode changes the default to "no lines configured",
-so both playback and capture lines should be configured when a subnode is added.
-
-Examples:
-1)
-
-lpass@28100000 {
-    compatible = "qcom,lpass-cpu";
-    clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
-    clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
-    interrupts = <0 85 1>;
-    interrupt-names = "lpass-irq-lpaif";
-    pinctrl-names = "default", "idle";
-    pinctrl-0 = <&mi2s_default>;
-    pinctrl-1 = <&mi2s_idle>;
-    reg = <0x28100000 0x10000>;
-    reg-names = "lpass-lpaif";
-    qcom,adsp = <&adsp>;
-
-    #address-cells = <1>;
-    #size-cells = <0>;
-
-    /* Optional to set different MI2S SD lines */
-    dai@3 {
-            reg = <MI2S_QUATERNARY>;
-            qcom,playback-sd-lines = <0 1>;
-    };
-};
-
-2)
-
-#include <dt-bindings/sound/sc7180-lpass.h>
-
-lpass_cpu: lpass {
-    compatible = "qcom,lpass-cpu-sc7180";
-
-    reg = <0 0x62F00000 0 0x29000>;
-
-    iommus = <&apps_smmu 0x1020 0>;
-
-    power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
-    clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
-            <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
-            <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
-            <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
-            <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
-            <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
-    clock-names = "pcnoc-sway-clk", "audio-core",
-                    "mclk0", "pcnoc-mport-clk",
-                    "mi2s-bit-clk0", "mi2s-bit-clk1";
-    interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
-    interrupt-names = "lpass-irq-lpaif";
-
-
-    #sound-dai-cells = <1>;
-
-    #address-cells = <1>;
-    #size-cells = <0>;
-
-    mi2s-primary@0 {
-            reg = <MI2S_PRIMARY>;
-            qcom,playback-sd-lines = <1>;
-            qcom,capture-sd-lines = <0>;
-    };
-
-    mi2s-secondary@1 {
-            reg = <MI2S_SECONDARY>;
-            qcom,playback-sd-lines = <0>;
-    };
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 00000000..03c598f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
If all the authors are QCom or Linaro please dual license.
Ok
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS CPU dai driver bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
+  - Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
+
+description: |
+  Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
+  for audio data transfer on external codecs. LPASS cpu driver is a module to
+  configure Low-Power Audio Interface(LPAIF) core registers across different
+  IP versions.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,lpass-cpu
+        description: For IPQ806x
+
+      - const: qcom,apq8016-lpass-cpu
+        description: For APQ8016
+
+      - const: qcom,lpass-cpu-sc7180
+        description: For SC7180
Use enum rather than oneOf+const
Sure
+
+  reg:
+    maxItems: 1
+    description: LPAIF core registers
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+    description: LPAIF DMA buffer interrupt
+
+  qcom,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle for the audio DSP node
+
+  iommus:
+    maxItems: 1
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+patternProperties:
+  "(^mi2s-[0-9a-f]$|mi2s)":
+    type: object
+    description: Required properties for each DAI
+
+    properties:
+      reg:
+        maxItems: 1
+        description: Must be one of the DAI ID
+
+    required:
+      - reg
+
+
Extra blank line.
Ok
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#sound-dai-cells'
Add:

additionalProperties: false
If I am adding this, I am getting below error:

Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml:
lpass@62f00000: '#address-cells', '#size-cells' do not match any of the
regexes: '(^mi2s-[0-9a-f]$|mi2s)', 'pinctrl-[0-9]+'


I think  this is coming because we have not mentioned mi2s-primary@0 in
required fields.
The field name is variable based on the interface to which peripheral is
connected to.
It can be either of primary/secondary/tertiary/quaternary. Can you
please suggest how to
avoid this error?
No, the error is because you didn't list '#address-cells' and
'#size-cells' as properties.
Thanks Rob for the input. Posted v5 patches with the change.

Rob

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux