> > This patch adds a dapm route to provide early mclk/sclk for for DMIC on > SSP0(rt5514) and Headset on SSP1(rt5663). > > The sclk rate for both codecs is different which is taken care of in the > platform_clock_control().The platform has one mclk and one sclk. Two > variables sclk0 and sclk1 are used for the two codecs on differnet ssp that use > different clock rate. > > This change ensures the DMIC PCM port will return valid data > > Signed-off-by: Brent Lu <brent.lu@xxxxxxxxx> > Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@xxxxxxxxx> > Signed-off-by: Harsha Priya <harshapriya.n@xxxxxxxxx> Hi Harsha, Isn't it working? I tested it on a eve before upstreaming. Thanks. commit 15747a80207585fe942416025540c0ff34e2aef8 Author: Brent Lu <brent.lu@xxxxxxxxx> Date: Fri Oct 25 17:11:31 2019 +0800 ASoC: eve: implement set_bias_level function for rt5514 The first DMIC capture always fail (zero sequence data from PCM port) after using DSP hotwording function (i.e. Google assistant). This rt5514 codec requires to control mclk directly in the set_bias_level function. Implement this function in machine driver to control the ssp1_mclk clock explicitly could fix this issue. Signed-off-by: Brent Lu <brent.lu@xxxxxxxxx> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/1571994691-20199-1-git-send-email-brent.lu@xxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Regards, Brent > --- > v1 -> v2: > - Only one mclk with same rate is used, so changed to using one variable > - dropping ssp_ prefix from sclk variable names to make them sound right. > - removing a return statment that was not required > - fixed commit message accordingly > > .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 146 > ++++++++++++++------- > 1 file changed, 97 insertions(+), 49 deletions(-) > > diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c > b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c > index b34cf6c..155f2b4 100644 > --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c > +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c > @@ -54,7 +54,8 @@ struct kbl_codec_private { > struct list_head hdmi_pcm_list; > struct snd_soc_jack kabylake_hdmi[2]; > struct clk *mclk; > - struct clk *sclk; > + struct clk *sclk0; > + struct clk *sclk1; > }; > > enum { > @@ -77,13 +78,29 @@ static const struct snd_kcontrol_new > kabylake_controls[] = { }; > > static int platform_clock_control(struct snd_soc_dapm_widget *w, > - struct snd_kcontrol *k, int event) > + struct snd_kcontrol *k, int event, int ssp_num) > { > struct snd_soc_dapm_context *dapm = w->dapm; > struct snd_soc_card *card = dapm->card; > struct kbl_codec_private *priv = snd_soc_card_get_drvdata(card); > + struct clk *sclk; > + unsigned long sclk_rate; > int ret = 0; > > + switch (ssp_num) { > + case 0: > + sclk = priv->sclk0; > + sclk_rate = 6144000; > + break; > + case 1: > + sclk = priv->sclk1; > + sclk_rate = 3072000; > + break; > + default: > + dev_err(card->dev, "Invalid ssp_num %d\n", ssp_num); > + return -EINVAL; > + } > + > /* > * MCLK/SCLK need to be ON early for a successful synchronization of > * codec internal clock. And the clocks are turned off during @@ - > 91,38 +108,48 @@ static int platform_clock_control(struct > snd_soc_dapm_widget *w, > */ > switch (event) { > case SND_SOC_DAPM_PRE_PMU: > - /* Enable MCLK */ > ret = clk_set_rate(priv->mclk, 24000000); > if (ret < 0) { > - dev_err(card->dev, "Can't set rate for mclk, err: > %d\n", > - ret); > - return ret; > + dev_err(card->dev, "Can't set rate for mclk for ssp%d, > err: %d\n", > + ssp_num, ret); > + return ret; > } > > - ret = clk_prepare_enable(priv->mclk); > - if (ret < 0) { > - dev_err(card->dev, "Can't enable mclk, err: %d\n", > ret); > - return ret; > + if (!__clk_is_enabled(priv->mclk)) { > + /* Enable MCLK */ > + ret = clk_prepare_enable(priv->mclk); > + if (ret < 0) { > + dev_err(card->dev, "Can't enable mclk for > ssp%d, err: %d\n", > + ssp_num, ret); > + return ret; > + } > } > > - /* Enable SCLK */ > - ret = clk_set_rate(priv->sclk, 3072000); > + ret = clk_set_rate(sclk, sclk_rate); > if (ret < 0) { > - dev_err(card->dev, "Can't set rate for sclk, err: > %d\n", > - ret); > + dev_err(card->dev, "Can't set rate for sclk for ssp%d, > err: %d\n", > + ssp_num, ret); > clk_disable_unprepare(priv->mclk); > return ret; > } > > - ret = clk_prepare_enable(priv->sclk); > - if (ret < 0) { > - dev_err(card->dev, "Can't enable sclk, err: %d\n", > ret); > - clk_disable_unprepare(priv->mclk); > + if (!__clk_is_enabled(sclk)) { > + /* Enable SCLK */ > + ret = clk_prepare_enable(sclk); > + if (ret < 0) { > + dev_err(card->dev, "Can't enable sclk for > ssp%d, err: %d\n", > + ssp_num, ret); > + clk_disable_unprepare(priv->mclk); > + return ret; > + } > } > break; > case SND_SOC_DAPM_POST_PMD: > - clk_disable_unprepare(priv->mclk); > - clk_disable_unprepare(priv->sclk); > + if (__clk_is_enabled(priv->mclk)) > + clk_disable_unprepare(priv->mclk); > + > + if (__clk_is_enabled(sclk)) > + clk_disable_unprepare(sclk); > break; > default: > return 0; > @@ -131,6 +158,18 @@ static int platform_clock_control(struct > snd_soc_dapm_widget *w, > return 0; > } > > +static int platform_clock_control_ssp0(struct snd_soc_dapm_widget *w, > + struct snd_kcontrol *k, int event) > +{ > + return platform_clock_control(w, k, event, 0); } > + > +static int platform_clock_control_ssp1(struct snd_soc_dapm_widget *w, > + struct snd_kcontrol *k, int event) > +{ > + return platform_clock_control(w, k, event, 1); } > + > static const struct snd_soc_dapm_widget kabylake_widgets[] = { > SND_SOC_DAPM_HP("Headphone Jack", NULL), > SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -139,15 +178,17 > @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = { > SND_SOC_DAPM_MIC("DMIC", NULL), > SND_SOC_DAPM_SPK("HDMI1", NULL), > SND_SOC_DAPM_SPK("HDMI2", NULL), > - SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, > - platform_clock_control, SND_SOC_DAPM_PRE_PMU > | > + SND_SOC_DAPM_SUPPLY("Platform Clock SSP0", SND_SOC_NOPM, > 0, 0, > + platform_clock_control_ssp0, > SND_SOC_DAPM_PRE_PMU | > + SND_SOC_DAPM_POST_PMD), > + SND_SOC_DAPM_SUPPLY("Platform Clock SSP1", SND_SOC_NOPM, > 0, 0, > + platform_clock_control_ssp1, > SND_SOC_DAPM_PRE_PMU | > SND_SOC_DAPM_POST_PMD), > - > }; > > static const struct snd_soc_dapm_route kabylake_map[] = { > /* Headphones */ > - { "Headphone Jack", NULL, "Platform Clock" }, > + { "Headphone Jack", NULL, "Platform Clock SSP1" }, > { "Headphone Jack", NULL, "HPOL" }, > { "Headphone Jack", NULL, "HPOR" }, > > @@ -156,7 +197,7 @@ static const struct snd_soc_dapm_route > kabylake_map[] = { > { "Right Spk", NULL, "Right BE_OUT" }, > > /* other jacks */ > - { "Headset Mic", NULL, "Platform Clock" }, > + { "Headset Mic", NULL, "Platform Clock SSP1" }, > { "IN1P", NULL, "Headset Mic" }, > { "IN1N", NULL, "Headset Mic" }, > > @@ -180,6 +221,7 @@ static const struct snd_soc_dapm_route > kabylake_map[] = { > { "ssp0 Rx", NULL, "Right HiFi Capture" }, > > /* DMIC */ > + { "DMIC", NULL, "Platform Clock SSP0" }, > { "DMIC1L", NULL, "DMIC" }, > { "DMIC1R", NULL, "DMIC" }, > { "DMIC2L", NULL, "DMIC" }, > @@ -666,7 +708,7 @@ static int kabylake_set_bias_level(struct > snd_soc_card *card, > if (!component || strcmp(component->name, RT5514_DEV_NAME)) > return 0; > > - if (IS_ERR(priv->mclk)) > + if (IS_ERR(priv->mclk0)) > return 0; > > /* > @@ -757,6 +799,28 @@ static struct snd_soc_card kabylake_audio_card = { > .late_probe = kabylake_card_late_probe, }; > > +static int kabylake_audio_clk_get(struct device *dev, const char *id, > + struct clk **clk) > +{ > + int ret = 0; > + > + if (!clk) > + return -EINVAL; > + > + *clk = devm_clk_get(dev, id); > + if (IS_ERR(*clk)) { > + ret = PTR_ERR(*clk); > + if (ret == -ENOENT) { > + dev_info(dev, "Failed to get %s, defer probe\n", id); > + return -EPROBE_DEFER; > + } > + > + dev_err(dev, "Failed to get %s with err:%d\n", id, ret); > + } > + > + return ret; > +} > + > static int kabylake_audio_probe(struct platform_device *pdev) { > struct kbl_codec_private *ctx; > @@ -777,33 +841,17 @@ static int kabylake_audio_probe(struct > platform_device *pdev) > dmic_constraints = mach->mach_params.dmic_num == 2 ? > &constraints_dmic_2ch : > &constraints_dmic_channels; > > - ctx->mclk = devm_clk_get(&pdev->dev, "ssp1_mclk"); > - if (IS_ERR(ctx->mclk)) { > - ret = PTR_ERR(ctx->mclk); > - if (ret == -ENOENT) { > - dev_info(&pdev->dev, > - "Failed to get ssp1_mclk, defer probe\n"); > - return -EPROBE_DEFER; > - } > - > - dev_err(&pdev->dev, "Failed to get ssp1_mclk with > err:%d\n", > - ret); > + ret = kabylake_audio_clk_get(&pdev->dev, "ssp0_sclk", &ctx->sclk0); > + if (ret != 0) > return ret; > - } > > - ctx->sclk = devm_clk_get(&pdev->dev, "ssp1_sclk"); > - if (IS_ERR(ctx->sclk)) { > - ret = PTR_ERR(ctx->sclk); > - if (ret == -ENOENT) { > - dev_info(&pdev->dev, > - "Failed to get ssp1_sclk, defer probe\n"); > - return -EPROBE_DEFER; > - } > + ret = kabylake_audio_clk_get(&pdev->dev, "ssp1_mclk", &ctx- > >mclk); > + if (ret != 0) > + return ret; > > - dev_err(&pdev->dev, "Failed to get ssp1_sclk with err:%d\n", > - ret); > + ret = kabylake_audio_clk_get(&pdev->dev, "ssp1_sclk", &ctx->sclk1); > + if (ret != 0) > return ret; > - } > > return devm_snd_soc_register_card(&pdev->dev, > &kabylake_audio_card); } > -- > 2.7.4