The patch fixed all compilation errors for me, thank you. I did have to apply it manually, but that was rather simple.
I can confirm that SPDIF input doesn't work for the card, but I haven't applied the patch that you suggested to John Stile for that, yet. I'll do that a bit later today if you still recommend it
Is this patch still recommended?
> diff -r 2d3893cf030c pci/hda/patch_via.c
> --- a/pci/hda/patch_via.c Tue Dec 18 15:42:53 2007 +0100
> +++ b/pci/hda/patch_via.c Tue Dec 18 17:48:00 2007 +0100
> @@ -568,25 +568,27 @@ static int via_init(struct hda_codec *co
> if (IS_VT1708_VENDORID(codec->vendor_id)) {
> snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
> AC_VERB_SET_PIN_WIDGET_CONTROL,
> - 0x40);
> + PIN_OUT);
> snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0,
> AC_VERB_SET_EAPD_BTLENABLE, 0x02);
> } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) ||
> IS_VT1709_6CH_VENDORID(codec->vendor_id)) {
> snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
> AC_VERB_SET_PIN_WIDGET_CONTROL,
> - 0x40);
> + PIN_OUT);
> snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0,
> AC_VERB_SET_EAPD_BTLENABLE, 0x02);
> } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) ||
> IS_VT1708B_4CH_VENDORID(codec->vendor_id)) {
> snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
> AC_VERB_SET_PIN_WIDGET_CONTROL,
> - 0x40);
> + PIN_OUT);
> snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0,
> AC_VERB_SET_EAPD_BTLENABLE, 0x02);
> }
> - }
> + } else /* enable SPDIF-input pin */
> + snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0,
> + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN);
>
> return 0;
> }
Thanks again!
-- Darryl
-------------- Original message ----------------------
From: Takashi Iwai <tiwai@xxxxxxx>
[...]
> Thanks. Does the patch below fix the probelm?
> Run hgcompile after applying it.
>
>
> Takashi
>
> diff -r 414b1156a8b3 configure.in
> --- a/configure.in Tue Dec 18 16:09:20 2007 +0100
> +++ b/configure.in Fri Dec 21 12:10:53 2007 +0100
> @@ -1230,7 +1230,7 @@ esac
>
> dnl set ia32 (X86)
> case "$processor" in
> - i?86*|k?|crusoe|mcyrixiii|mwinchip|viac3_2|mcore2|geodegx*)
> + i?86*|k?|crusoe|mcyrixiii|mwinchip|viac3_2|mcore2|geodegx*|x86_32)
> if $KCC -mpreferred-stack-boundary=2 -S -o /dev/null -xc /dev/null
> >/dev/null 2>&1; then
> c_opts="-mpreferred-stack-boundary=2 $c_opts"
> CONFIG_X86=y
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@xxxxxxxxxxxxxxxx
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
