From: Simon Shields <simon@xxxxxxxxxxxxx>
Update the never-mainlined "samsung,trats2-audio" binding and instead
use the new "samsung,midas-audio" binding.
Signed-off-by: Simon Shields <simon@xxxxxxxxxxxxx>
[s.nawrocki: fixed DAPM routing entries for MICBIAS1/2, adjusted to
new cpu/codec binding, corrected the regulator nodes indexing]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
Changes for v3:
- none.
Changes for v2:
- reordering to maintain alphabetical order,
- corrected the fixed voltage regulator nodes indexing,
- whitespace fixes.
---
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 42 +++++++++++++++-
arch/arm/boot/dts/exynos4412-i9300.dts | 4 ++
arch/arm/boot/dts/exynos4412-midas.dtsi | 78 ++++++++++++++++++++++++-----
arch/arm/boot/dts/exynos4412-n710x.dts | 37 +++++++++++++-
4 files changed, 145 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 53b3ca3..89ed81f 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -33,7 +33,7 @@
};
};
- lcd_vdd3_reg: voltage-regulator-7 {
+ lcd_vdd3_reg: voltage-regulator-10 {
compatible = "regulator-fixed";
regulator-name = "LCD_VDD_2.2V";
regulator-min-microvolt = <2200000>;
@@ -42,7 +42,7 @@
enable-active-high;
};
- ps_als_reg: voltage-regulator-8 {
+ ps_als_reg: voltage-regulator-11 {
compatible = "regulator-fixed";
regulator-name = "LED_A_3.0V";
regulator-min-microvolt = <3000000>;
@@ -171,6 +171,44 @@
status = "okay";
};
+&sound {
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+ "SPK", "SPKOUTRN",
+ "SPK", "SPKOUTRP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "HDMI", "LINEOUT1N",
+ "HDMI", "LINEOUT1P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "MICBIAS1",
+ "IN1LN", "MICBIAS1",
+ "Main Mic", "MICBIAS1",
+
+ "IN1RP", "Sub Mic",
+ "IN1RN", "Sub Mic",
+
+ "IN2LP:VXRN", "MICBIAS2",
+ "Headset Mic", "MICBIAS2",
+
+ "IN2RN", "FM In",
+ "IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+ gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+};
+
&touchkey_reg {
gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts
index f8125a9..3691802 100644
--- a/arch/arm/boot/dts/exynos4412-i9300.dts
+++ b/arch/arm/boot/dts/exynos4412-i9300.dts
@@ -20,3 +20,7 @@
reg = <0x40000000 0x40000000>;
};
};
+
+&sound {
+ fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 2c8111c..8e7a032 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -102,6 +102,30 @@
status = "disabled";
};
+ vbatt_reg: voltage-regulator-7 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBATT";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ mic_bias_reg: voltage-regulator-8 {
+ compatible = "regulator-fixed";
+ regulator-name = "MICBIAS_LDO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ submic_bias_reg: voltage-regulator-9 {
+ compatible = "regulator-fixed";
+ regulator-name = "SUB_MICBIAS_LDO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -266,16 +290,18 @@
clock-names = "ext_clock";
};
- sound {
- compatible = "samsung,trats2-audio";
- samsung,i2s-controller = <&i2s0>;
- samsung,model = "Trats2";
- samsung,audio-codec = <&wm1811>;
- samsung,audio-routing =
- "SPK", "SPKOUTLN",
- "SPK", "SPKOUTLP",
- "SPK", "SPKOUTRN",
- "SPK", "SPKOUTRP";
+ sound: sound {
+ compatible = "samsung,midas-audio";
+ model = "Midas";
+ mic-bias-supply = <&mic_bias_reg>;
+ submic-bias-supply = <&submic_bias_reg>;
+
+ cpu {
+ sound-dai = <&i2s0 0>;
+ };
+ codec {
+ sound-dai = <&wm1811>;
+ };
};
thermistor-ap {
@@ -597,11 +623,37 @@
wm1811: wm1811@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
- clocks = <&pmu_system_controller 0>;
- clock-names = "MCLK1";
- DCVDD-supply = <&ldo3_reg>;
+ clocks = <&pmu_system_controller 0>,
+ <&max77686 MAX77686_CLK_PMIC>;
+ clock-names = "MCLK1", "MCLK2";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ #sound-dai-cells = <0>;
+
+ wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
+ 0x0 0x8000 0x0 0x0 0x0>;
+ wlf,micbias-cfg = <0x2f 0x2b>;
+
+ wlf,lineout1-feedback;
+ wlf,lineout1-se;
+ wlf,lineout2-se;
+ wlf,ldoena-always-driven;
+
+ AVDD2-supply = <&vbatt_reg>;
DBVDD1-supply = <&ldo3_reg>;
+ DBVDD2-supply = <&vbatt_reg>;
+ DBVDD3-supply = <&vbatt_reg>;
+ DCVDD-supply = <&ldo3_reg>;
+ CPVDD-supply = <&vbatt_reg>;
+ SPKVDD1-supply = <&vbatt_reg>;
+ SPKVDD2-supply = <&vbatt_reg>;
wlf,ldo1ena = <&gpj0 4 0>;
+ wlf,ldo2ena = <&gpj0 4 0>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index 4189e1f..2361d89 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -13,7 +13,7 @@
/* bootargs are passed in by bootloader */
- cam_vdda_reg: voltage-regulator-7 {
+ cam_vdda_reg: voltage-regulator-10 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
@@ -74,6 +74,41 @@
status = "okay";
};
+&sound {
+ samsung,audio-routing =
+ "HP", "HPOUT1L",
+ "HP", "HPOUT1R",
+
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+
+ "RCV", "HPOUT2N",
+ "RCV", "HPOUT2P",
+
+ "HDMI", "LINEOUT1N",
+ "HDMI", "LINEOUT1P",
+
+ "LINE", "LINEOUT2N",
+ "LINE", "LINEOUT2P",
+
+ "IN1LP", "MICBIAS2",
+ "IN1LN", "MICBIAS2",
+ "Headset Mic", "MICBIAS2",
+
+ "IN1RP", "Sub Mic",
+ "IN1RN", "Sub Mic",
+
+ "IN2LP:VXRN", "Main Mic",
+ "IN2LN", "Main Mic",
+
+ "IN2RN", "FM In",
+ "IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+ regulator-always-on;
+};
+
&touchkey_reg {
gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
status = "okay";
--
2.7.4
