Hi Ravulapati > +static int acp3x_1015_hw_params(struct snd_pcm_substream *substream, > + struct snd_pcm_hw_params *params) > +{ > + struct snd_soc_pcm_runtime *rtd = substream->private_data; > + struct snd_soc_dai *codec_dai; > + int srate, i, ret; > + > + ret = 0; > + srate = params_rate(params); > + > + for (i = 0; i < rtd->num_codecs; i++) { You can use for_each_rtd_codec_dais() here > + if (strcmp(rtd->codec_dais[i]->name, "rt1015-aif")) > + continue; > + codec_dai = rtd->codec_dais[i]; > + > + ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64); > + if (ret < 0) { > + dev_err(codec_dai->dev, > + "codec_dai bclk ratio not set\n"); > + return ret; > + } > + ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK, > + 64 * srate, 256 * srate); > + if (ret < 0) { > + dev_err(codec_dai->dev, "codec_dai PLL not set\n"); > + return ret; > + } > + ret = snd_soc_dai_set_sysclk(codec_dai, RT1015_SCLK_S_PLL, > + 256 * srate, SND_SOC_CLOCK_IN); > + if (ret < 0) { > + dev_err(codec_dai->dev, > + "codec_dai sys clock not set\n"); > + return ret; > + } You don't need to use dev_err() for snd_soc_dai_xxx(). Current snd_soc_dai_xxx() will indicate error message in such case. Thank you for your help !! Best regards --- Kuninori Morimoto