Hello Rob, Thanks a lot for your review! Best Regards, Katsuhiro Suzuki On 2020/07/21 11:12, Rob Herring wrote:
On Tue, Jul 14, 2020 at 05:09:59PM +0900, Katsuhiro Suzuki wrote:This patch converts ROHM BD28623UMV class D speaker amplifier binding to DT schema. Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx> --- .../bindings/sound/rohm,bd28623.txt | 29 --------- .../bindings/sound/rohm,bd28623.yaml | 65 +++++++++++++++++++ 2 files changed, 65 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.yaml diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt deleted file mode 100644 index d84557c2686e..000000000000 --- a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt +++ /dev/null @@ -1,29 +0,0 @@ -ROHM BD28623MUV Class D speaker amplifier for digital input - -This codec does not have any control buses such as I2C, it detect format and -rate of I2S signal automatically. It has two signals that can be connected -to GPIOs: reset and mute. - -Required properties: -- compatible : should be "rohm,bd28623" -- #sound-dai-cells: should be 0. -- VCCA-supply : regulator phandle for the VCCA supply -- VCCP1-supply : regulator phandle for the VCCP1 supply -- VCCP2-supply : regulator phandle for the VCCP2 supply - -Optional properties: -- reset-gpios : GPIO specifier for the active low reset line -- mute-gpios : GPIO specifier for the active low mute line - -Example: - - codec { - compatible = "rohm,bd28623"; - #sound-dai-cells = <0>; - - VCCA-supply = <&vcc_reg>; - VCCP1-supply = <&vcc_reg>; - VCCP2-supply = <&vcc_reg>; - reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml new file mode 100644 index 000000000000..acd8609252b4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rohm,bd28623.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD28623MUV Class D speaker amplifier for digital input + +description: + This codec does not have any control buses such as I2C, it detect + format and rate of I2S signal automatically. It has two signals + that can be connected to GPIOs reset and mute. + +maintainers: + - Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx> + +properties: + compatible: + const: rohm,bd28623 + + "#sound-dai-cells": + const: 0 + + VCCA-supply: + description: + regulator phandle for the VCCA (for analog) power supply + + VCCP1-supply: + description: + regulator phandle for the VCCP1 (for ch1) power supply + + VCCP2-supply: + description: + regulator phandle for the VCCP2 (for ch2) power supply + + reset-gpios: + maxItems: 1 + description: + GPIO specifier for the active low reset line + + mute-gpios: + maxItems: 1 + description: + GPIO specifier for the active low mute line + +required: + - compatible + - VCCA-supply + - VCCP1-supply + - VCCP2-supply + - "#sound-dai-cells"Needs an: additionalProperties: false With that, Reviewed-by: Rob Herring <robh@xxxxxxxxxx>+ +examples: + - | + #include <dt-bindings/gpio/gpio.h> + codec { + compatible = "rohm,bd28623"; + #sound-dai-cells = <0>; + + VCCA-supply = <&vcc_reg>; + VCCP1-supply = <&vcc_reg>; + VCCP2-supply = <&vcc_reg>; + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; -- 2.27.0
