From: Shuming Fan <shumingf@xxxxxxxxxxx>
Some settings should set to default value after the calibration.
This patch also disables the 25MHz and 1MHz clock power when the jack unplugged.
The JD is triggered by JDH, therefore this patch removes JDL setting.
Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
---
sound/soc/codecs/rt5682-i2c.c | 2 +-
sound/soc/codecs/rt5682-sdw.c | 2 +-
sound/soc/codecs/rt5682.c | 12 +++++++++---
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c
index b24f93ff0e55..85aba311bdc8 100644
--- a/sound/soc/codecs/rt5682-i2c.c
+++ b/sound/soc/codecs/rt5682-i2c.c
@@ -232,7 +232,7 @@ static int rt5682_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1,
RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK,
RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X);
- regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380);
+ regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080);
regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1,
RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK,
RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1);
diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c
index 4cecc5ce545c..94bf6bee78e6 100644
--- a/sound/soc/codecs/rt5682-sdw.c
+++ b/sound/soc/codecs/rt5682-sdw.c
@@ -431,7 +431,7 @@ static int rt5682_io_init(struct device *dev, struct sdw_slave *slave)
regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1,
RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK,
RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X);
- regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380);
+ regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080);
regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000);
regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8,
RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA);
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index d7302f968a75..c06f5763573c 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -963,6 +963,9 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
RT5682_HP_CHARGE_PUMP_1,
RT5682_OSW_L_MASK | RT5682_OSW_R_MASK,
RT5682_OSW_L_EN | RT5682_OSW_R_EN);
+ snd_soc_component_update_bits(component, RT5682_MICBIAS_2,
+ RT5682_PWR_CLK25M_MASK | RT5682_PWR_CLK1M_MASK,
+ RT5682_PWR_CLK25M_PU | RT5682_PWR_CLK1M_PU);
} else {
rt5682_enable_push_button_irq(component, false);
snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
@@ -975,6 +978,9 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0);
snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
RT5682_PWR_CBJ, 0);
+ snd_soc_component_update_bits(component, RT5682_MICBIAS_2,
+ RT5682_PWR_CLK25M_MASK | RT5682_PWR_CLK1M_MASK,
+ RT5682_PWR_CLK25M_PD | RT5682_PWR_CLK1M_PD);
rt5682->jack_type = 0;
}
@@ -1022,8 +1028,7 @@ static int rt5682_set_jack_detect(struct snd_soc_component *component,
RT5682_POW_ANA, RT5682_POW_IRQ |
RT5682_POW_JDH | RT5682_POW_ANA);
regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2,
- RT5682_PWR_JDH | RT5682_PWR_JDL,
- RT5682_PWR_JDH | RT5682_PWR_JDL);
+ RT5682_PWR_JDH, RT5682_PWR_JDH);
regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2,
RT5682_JD1_EN_MASK | RT5682_JD1_POL_MASK,
RT5682_JD1_EN | RT5682_JD1_POL_NOR);
@@ -3031,13 +3036,14 @@ void rt5682_calibrate(struct rt5682_priv *rt5682)
dev_err(rt5682->component->dev, "HP Calibration Failure\n");
/* restore settings */
- regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0x02af);
+ regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0x002f);
regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080);
regmap_write(rt5682->regmap, RT5682_GLB_CLK, 0x0000);
regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0000);
regmap_write(rt5682->regmap, RT5682_CHOP_DAC, 0x2000);
regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x2005);
regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0xc0c4);
+ regmap_write(rt5682->regmap, RT5682_CAL_REC, 0x0c0c);
mutex_unlock(&rt5682->calibrate_mutex);
}
--
2.27.0
