Re: [PATCH 1/2] dt-bindings: tas2770: Convert tas2770 binding to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 12, 2020 at 12:13:41PM -0500, Dan Murphy wrote:
> Convert the tas2770 binding to yaml format.
> Add in the reset-gpio to the binding as it is in the code but not
> documented in the binding.
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>  .../devicetree/bindings/sound/tas2770.txt     | 37 ---------
>  .../devicetree/bindings/sound/tas2770.yaml    | 76 +++++++++++++++++++
>  2 files changed, 76 insertions(+), 37 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/tas2770.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/tas2770.txt b/Documentation/devicetree/bindings/sound/tas2770.txt
> deleted file mode 100644
> index ede6bb3d9637..000000000000
> --- a/Documentation/devicetree/bindings/sound/tas2770.txt
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -Texas Instruments TAS2770 Smart PA
> -
> -The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
> -efficiently driving high peak power into small loudspeakers.
> -Integrated speaker voltage and current sense provides for
> -real time monitoring of loudspeaker behavior.
> -
> -Required properties:
> -
> - - compatible:	   - Should contain "ti,tas2770".
> - - reg:		       - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>.
> - - #address-cells  - Should be <1>.
> - - #size-cells     - Should be <0>.
> - - ti,asi-format:  - Sets TDM RX capture edge. 0->Rising; 1->Falling.
> - - ti,imon-slot-no:- TDM TX current sense time slot.
> - - ti,vmon-slot-no:- TDM TX voltage sense time slot.
> -
> -Optional properties:
> -
> -- interrupt-parent: the phandle to the interrupt controller which provides
> -                     the interrupt.
> -- interrupts: interrupt specification for data-ready.
> -
> -Examples:
> -
> -    tas2770@4c {
> -                compatible = "ti,tas2770";
> -                reg = <0x4c>;
> -                #address-cells = <1>;
> -                #size-cells = <0>;
> -                interrupt-parent = <&msm_gpio>;
> -                interrupts = <97 0>;
> -                ti,asi-format = <0>;
> -                ti,imon-slot-no = <0>;
> -                ti,vmon-slot-no = <2>;
> -        };
> -
> diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
> new file mode 100644
> index 000000000000..8c667fd37a57
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)

Do you have rights to relicense? The old binding defaults to 
GPL-2.0-only. If so, great.

Either way, GPL-2.0-only not GPL-2.0+.

Otherwise,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

> +# Copyright (C) 2019-20 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/sound/tas2770.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Texas Instruments TAS2770 Smart PA
> +
> +maintainers:
> +  - Shi Fu <shifu0704@xxxxxxxxxxxxxxx>
> +
> +description: |
> +  The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
> +  efficiently driving high peak power into small loudspeakers.
> +  Integrated speaker voltage and current sense provides for
> +  real time monitoring of loudspeaker behavior.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,tas2770
> +
> +  reg:
> +    maxItems: 1
> +    description: |
> +       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
> +
> +  reset-gpio:
> +    description: GPIO used to reset the device.
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ti,imon-slot-no:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: TDM TX current sense time slot.
> +
> +  ti,vmon-slot-no:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: TDM TX voltage sense time slot.
> +
> +  ti,asi-format:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Sets TDM RX capture edge.
> +    enum:
> +          - 0 # Rising edge
> +          - 1 # Falling edge
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +   #include <dt-bindings/gpio/gpio.h>
> +   i2c0 {
> +     #address-cells = <1>;
> +     #size-cells = <0>;
> +     codec: codec@4c {
> +       compatible = "ti,tas2770";
> +       reg = <0x4c>;
> +       #sound-dai-cells = <1>;
> +       interrupt-parent = <&gpio1>;
> +       interrupts = <14>;
> +       reset-gpio = <&gpio1 15 0>;
> +       ti,imon-slot-no = <0>;
> +       ti,vmon-slot-no = <2>;
> +     };
> +   };
> +
> -- 
> 2.26.2
> 



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux