On Tue, 14 Jul 2020 10:08:02 +0200, Jon Hunter wrote: > > Hi Takashi, > > On 18/06/2020 15:40, Takashi Iwai wrote: > > In the end we already enabled the sync-write mode for most of HD-audio > > controllers including Intel, and it's no big merit to keep the async > > write mode for the rest. Let's make it as default and drop the > > superfluous AZX_DCAPS_SYNC_WRITE bit flag. > > > > Also, avoid to set the allow_bus_reset flag, which is a quite unstable > > and hackish behavior that was needed only for some early platforms > > (decades ago). The straight fallback to the single cmd mode is more > > robust. > > > > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> > > > I have noticed a regression in HDA playback on our Tegra186 Jetson TX2 > platform. Bisect is pointing to this patch and reverting this does > appear to fix it. Interestingly, I am not seeing any problems on other > Tegra platforms, however, Tegra186 does have the IOMMU enabled for HDA > which is one different between the other platforms. > > We can take a closer look at this for Tegra, but I am wondering if we > revert this for Tegra for now. It's a deja vu, we (or someone else in Nvidia?) discussed it in the past? The patch below should cure the problem temporarily, as it sets the polling mode as default for Tegra. But it'd be appreciated if you can find the root cause. thanks, Takashi --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -394,6 +394,7 @@ static int hda_tegra_create(struct snd_card *card, if (err < 0) return err; + chip->bus.core.polling = 1; chip->bus.core.needs_damn_long_delay = 1; err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
