Re: [PATCH] ASoC: cros_ec_codec: Reset I2S RX when probing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Guenter Roeck <groeck@xxxxxxxxxx> 於 2020年7月8日 週三 下午9:28寫道:
>
> On Wed, Jul 8, 2020 at 3:16 AM Enric Balletbo i Serra
> <enric.balletbo@xxxxxxxxxxxxx> wrote:
> >
> > Hi Yu-Hsuan,
> >
> > Thank you for your patch.
> >
> > On 8/7/20 9:11, Yu-Hsuan Hsu wrote:
> > > It is not guaranteed that I2S RX is disabled when the kernel booting.
> > > For example, if the kernel crashes while it is enabled, it will keep
> > > enabled until the next time EC reboots. Reset I2S RX when probing to
> > > fix this issue.
> > >
> > > Signed-off-by: Yu-Hsuan Hsu <yuhsuan@xxxxxxxxxxxx>
> > > ---
> > >  include/linux/platform_data/cros_ec_commands.h | 1 +
> > >  sound/soc/codecs/cros_ec_codec.c               | 7 +++++++
> > >  2 files changed, 8 insertions(+)
> > >
> > > diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> > > index 69210881ebac8..11ce917ca924c 100644
> > > --- a/include/linux/platform_data/cros_ec_commands.h
> > > +++ b/include/linux/platform_data/cros_ec_commands.h
> > > @@ -4598,6 +4598,7 @@ enum ec_codec_i2s_rx_subcmd {
> > >       EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2,
> > >       EC_CODEC_I2S_RX_SET_DAIFMT = 0x3,
> > >       EC_CODEC_I2S_RX_SET_BCLK = 0x4,
> > > +     EC_CODEC_I2S_RX_RESET = 0x5,
> >
> > Is this a new command not available in the firmware that is already in the field?
> >
> >
> > >       EC_CODEC_I2S_RX_SUBCMD_COUNT,
> > >  };
> > >
> > > diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> > > index 8d45c628e988e..5495214e73e68 100644
> > > --- a/sound/soc/codecs/cros_ec_codec.c
> > > +++ b/sound/soc/codecs/cros_ec_codec.c
> > > @@ -1034,6 +1034,13 @@ static int cros_ec_codec_platform_probe(struct platform_device *pdev)
> > >       }
> > >       priv->ec_capabilities = r.capabilities;
> > >
> > > +     /* Reset EC codec I2S RX. */
> > > +     p.cmd = EC_CODEC_I2S_RX_RESET;
> > > +     ret = send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX,
> > > +                                (uint8_t *)&p, sizeof(p), NULL, 0);
> > > +     if (ret)
> > > +             dev_err(dev, "failed to EC_CODEC_I2S_RESET: %d\n", ret);
> > > +
> >
> > With an old firmware I suspect this message will appear on every boot, right?
> > So, to solve the issue and get rid of this error you're forced to upgrade the
> > firmware. Is that true?
> >
>
> It might possibly make more sense to fail this silently and to send
> EC_CODEC_I2S_RX_DISABLE as backup if it is not supported (-ENOTSUPP
> can possibly be used as trigger if the call returns it).
>
> Also, I don't accept dev_err() if the error is ignored for patches in
> my scope of responsibility.
>
> Guenter
Thanks for the suggestion. Our plan is to upstream this patch first.
And then we will merge it into the kernel after the firmware is
updated. Is it feasible? (I'm not sure whether there is the better way
if I want to update EC and the kernel at the same time.)

I think calling EC_CODEC_I2S_RX_DISABLE does not make sense because it
checks the value of i2s_rx_enabled first. If i2s_rx_enabled is false,
it will skip the function. However, we don't need to reset while the
i2s_rx_enabled is already false.

In addition, since it is a sub-command, it will return
EC_RES_INVALID_PARAM but not ENOTSUPP if the command is not supported.
And then EC_RES_INVALID_PARAM will turn into -EPROTO finally so it's
difficult to do other operators basing on the return value.

Thanks,
Yu-Hsuan

>
> > >       platform_set_drvdata(pdev, priv);
> > >
> > >       ret = devm_snd_soc_register_component(dev, &i2s_rx_component_driver,
> > >




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux