As Pierre-Louis Bossart pointed out, saying that the default mode for the SSP is TDM 4 slot is not entirely accurate. There really are 2 default modes: The default mode for the SSP configuration is TDM 4 slot for the cpu-dai (hard-coded in DSP firmware), The default mode for the SSP configuration is I2S for the codec-dai (hard-coded in the 'SSP2-Codec" .dai_fmt masks, so far unused). This commit updates the comment in cht_codec_fixup() to properly reflect this. Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- sound/soc/intel/boards/cht_bsw_rt5672.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index 1470c3de7895..1812b786d33b 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -253,13 +253,17 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); /* - * Default mode for SSP configuration is TDM 4 slot. One board/design, - * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The - * second piggy-backed, output-only codec is inside the keyboard-dock - * (which has extra speakers). Unlike the main rt5672 codec, we cannot - * configure this codec, it is hard coded to use 2 channel 24 bit I2S. - * Since we only support 2 channels anyways, there is no need for TDM - * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere. + * The default mode for the cpu-dai is TDM 4 slot. The default mode + * for the codec-dai is I2S. So we need to either set the cpu-dai to + * I2S mode to match the codec-dai, or set the codec-dai to TDM 4 slot + * (or program both to yet another mode). + * One board, the Lenovo Miix 2 10, uses not 1 but 2 codecs connected + * to SSP2. The second piggy-backed, output-only codec is inside the + * keyboard-dock (which has extra speakers). Unlike the main rt5672 + * codec, we cannot configure this codec, it is hard coded to use + * 2 channel 24 bit I2S. For this to work we must use I2S mode on this + * board. Since we only support 2 channels anyways, there is no need + * for TDM on any cht-bsw-rt5672 designs. So we use I2S 2ch everywhere. */ ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), SND_SOC_DAIFMT_I2S | -- 2.26.2
