Log results of failed EC commands to identify a problem more easily. Replace cros_ec_cmd_xfer_status with cros_ec_cmd_xfer because the result has already been checked in this function. The wrapper is not needed. Signed-off-by: Yu-Hsuan Hsu <yuhsuan@xxxxxxxxxxxx> --- sound/soc/codecs/cros_ec_codec.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index 8d45c628e988e..a4ab62f59efa6 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -90,10 +90,17 @@ static int send_ec_host_command(struct cros_ec_device *ec_dev, uint32_t cmd, if (outsize) memcpy(msg->data, out, outsize); - ret = cros_ec_cmd_xfer_status(ec_dev, msg); + ret = cros_ec_cmd_xfer(ec_dev, msg); if (ret < 0) goto error; + if (msg->result != EC_RES_SUCCESS) { + dev_err(ec_dev->dev, "Command %d failed: %d\n", cmd, + msg->result); + ret = -EPROTO; + goto error; + } + if (insize) memcpy(in, msg->data, insize); -- 2.27.0.212.ge8ba1cc988-goog