The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/codecs/rt5670.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index f21181734170..dfbc0ca38ff7 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -603,9 +603,9 @@ int rt5670_set_jack_detect(struct snd_soc_component *component,
EXPORT_SYMBOL_GPL(rt5670_set_jack_detect);
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
-static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0);
static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
-static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000);
static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
--
2.26.2
