Hello This series fixes issues tih the shut-down gpio device tree allocation and a code format issue found. While working on a project slot programming for the tx and rx paths needed to be enabled. In addition the vsense slot programming needed to be configurable and not directly a simpler adder to the isense slot. Finally the yaml conversion patch was moved to be the last patch in the series so that the fixes can be applied and the yaml can be reviewed appropriately and does not hold up the rest of the fixes. Dan Dan Murphy (7): dt-bindings: tas2562: Fix shut-down gpio property ASoC: tas2562: Update shutdown GPIO property ASoC: tas2562: Fix format issue for extra space before a comma ASoC: tas2562: Add rx and tx slot programming dt-bindings: tas2562: Add voltage sense slot property ASoC: tas2562: Add voltage sense slot configuration dt-bindings: tas2562: Convert the tas2562 binding to yaml .../devicetree/bindings/sound/tas2562.txt | 34 - .../devicetree/bindings/sound/tas2562.yaml | 77 + arch/arm/boot/compressed/fdt.h | 66 + arch/arm/boot/compressed/libfdt.h | 2072 +++++++++++++++++ arch/arm/boot/compressed/libfdt_internal.h | 173 ++ sound/soc/codecs/tas2562.c | 88 +- sound/soc/codecs/tas2562.h | 4 + 7 files changed, 2462 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml create mode 100644 arch/arm/boot/compressed/fdt.h create mode 100644 arch/arm/boot/compressed/libfdt.h create mode 100644 arch/arm/boot/compressed/libfdt_internal.h -- 2.26.2
