Dne Monday 03 of December 2007 10:29:38 jste napsal(a): > In my patch, I modified the input put callback to use > emu1616_src_regs. Check if it's a wrong implementation. Oh, you are right. I forgot to add 1616 related code here. Funny I didn't noticed any problem in regular use, because I use just analog inputs for capture (no difference between 1820 and 1616) and the internal routing worked as expected :-) Thanks for correcting. > > Unfortunatelly, now I found that driver (or host card) reload causes > > kernel ooops on 2.6.23 (2.6.22 is unaffected). This is NOT related to my > > patch. It crashes even with 1.0.15 version. This is bad :( It crashes > > immeditely after a firmware for the host card is loaded. Can someone > > confirm that? > > Try HG version whether the same problem occurs. Many bugs related > with emu10k1 have been done after 1.0.15. It seems it was caused by mix of latest driver/headres and older alsa-lib/alsa-utils. After upgrade of all components to the latest HG it is stable again. The pure 1.0.15 is stable as well with 2.6.13. It was just false alarm, fortunatelly. ----- Ctirad _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
