Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.
Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes")
Reported-by: John Stultz <john.stultz@xxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
sound/soc/qcom/common.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index 6c20bdd850f3..8ada4ecba847 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -4,6 +4,7 @@
#include <linux/module.h>
#include "common.h"
+#include "qdsp6/q6afe.h"
int qcom_snd_parse_of(struct snd_soc_card *card)
{
@@ -101,6 +102,15 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
}
link->no_pcm = 1;
link->ignore_pmdown_time = 1;
+
+ if (q6afe_is_rx_port(link->id)) {
+ link->dpcm_playback = 1;
+ link->dpcm_capture = 0;
+ } else {
+ link->dpcm_playback = 0;
+ link->dpcm_capture = 1;
+ }
+
} else {
dlc = devm_kzalloc(dev, sizeof(*dlc), GFP_KERNEL);
if (!dlc)
@@ -113,12 +123,12 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
link->codecs->dai_name = "snd-soc-dummy-dai";
link->codecs->name = "snd-soc-dummy";
link->dynamic = 1;
+ link->dpcm_playback = 1;
+ link->dpcm_capture = 1;
}
link->ignore_suspend = 1;
link->nonatomic = 1;
- link->dpcm_playback = 1;
- link->dpcm_capture = 1;
link->stream_name = link->name;
link++;
--
2.21.0
