On 10-06-20, 12:40, Jaroslav Kysela wrote: > Dne 10. 06. 20 v 12:07 Srinivas Kandagatla napsal(a): > > For gapless playback call to snd_compr_drain_notify() after > > partial drain should put the state to SNDRV_PCM_STATE_RUNNING > > rather than SNDRV_PCM_STATE_SETUP as the driver is ready to > > process the buffers for new track. > > > > With existing code, if we are playing 3 tracks in gapless, after > > partial drain finished on previous track 1 the state is set to > > SNDRV_PCM_STATE_SETUP which is then moved to SNDRV_PCM_STATE_PREPARED > > after data write. With this state calls to snd_compr_next_track() and > > few other calls will fail as they expect the state to be in > > SNDRV_PCM_STATE_RUNNING. > > > > Here is the sequence of events and state transitions: > > > > 1. set_params (Track 1), state = SNDRV_PCM_STATE_SETUP > > 2. set_metadata (Track 1), no state change, state = SNDRV_PCM_STATE_SETUP > > 3. fill and trigger start (Track 1), state = SNDRV_PCM_STATE_RUNNING > > 4. set_next_track (Track 2), state = SNDRV_PCM_STATE_RUNNING > > 5. partial_drain (Track 1), state = SNDRV_PCM_STATE_SETUP > > 6 snd_compr_drain_notify (Track 1), state = SNDRV_PCM_STATE_SETUP > > 7. fill data (Track 2), state = SNDRV_PCM_STATE_PREPARED > > 8. set_metadata (Track 3), no state change, state = SNDRV_PCM_STATE_PREPARED > > 9. set_next_track (Track 3), !! FAILURE as state != SNDRV_PCM_STATE_RUNNING > > > The snd_compr_drain_notify() is called only from snd_compr_stop(). Something > is missing in this sequence? It is supposed to be invoked by driver when partial drain is complete.. both intel and sprd driver are calling this. snd_compr_stop is stop while draining case so legit Somehow not sure how it got missed earlier, but this seem a decent fix but we still need to check all the states here.. -- ~Vinod
