The below series of patches support the KeemBay ASoC platform driver. The platform driver initialize the i2s to capture and playback the pcm data on the ARM. The i2s is running in polling mode. There is no DSP in the KeemBay SoC. Users are rely on the Gstreamer plugin to perform Audio preprocessing. Audio graph card is used to connect the platform driver with the tlv320aic3204 codec. Change History: v5: - Remove OF dependency from Kconfig as OF is shifted to audio graph card. v4: - Reduce if-otology at the tx/rx function. - Fix indentation. - specify .rate directly v3: - Adjusted header format. - Use Audio graph card instead of custom sound card. - Use if-else instead of conditional operator. - Enabled .set_fmt to configure master clock. v2: - Corrected I2S naming for DT binding. v1: - Initial version. Sia Jee Heng (3): ASoC: Intel: Add KeemBay platform driver ASoC: Intel: Add makefiles and kconfig changes for KeemBay dt-bindings: sound: Add documentation for KeemBay i2s .../bindings/sound/intel,keembay-i2s.yaml | 68 +++ sound/soc/intel/Kconfig | 7 + sound/soc/intel/Makefile | 1 + sound/soc/intel/keembay/Makefile | 4 + sound/soc/intel/keembay/kmb_platform.c | 654 +++++++++++++++++++++ sound/soc/intel/keembay/kmb_platform.h | 145 +++++ 6 files changed, 879 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml create mode 100644 sound/soc/intel/keembay/Makefile create mode 100644 sound/soc/intel/keembay/kmb_platform.c create mode 100644 sound/soc/intel/keembay/kmb_platform.h -- 1.9.1
