Hello,
on a laptop the old multiface I with a pccard (1) doesn't attach.
acore returns error -12.
details:
dmesg:
pccard: CardBus card inserted into slot 0
ALSA /root/alsa-driver-hg20071129/acore/init.c:174: cannot find the slot for index 0 (range 0-0), error: -16
RME Hammerfall DSP: probe of 0000:07:00.0 failed with error -12
config:
machine: sony vaio s5
kernel 2-6-24-rc3
all alsa-*-hg as you seen.
sound box: multiface I and pccard (I), the old one.
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:06:05.0)
lspcmcia:
Configuration: state: on ready: yes
Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V
lspci -v
06:05.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
Subsystem: Sony Corporation Unknown device 818f
Flags: bus master, medium devsel, latency 168, IRQ 17
Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
16-bit legacy interface ports at 0001
07:00.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 10)
Flags: medium devsel, IRQ 17
Memory at 54000000 (32-bit, non-prefetchable) [disabled] [size=64K]
cat /dev/sndstat:
...
0: alc-260
any help would be appreciated.
thanks.
best regards
raoul
rmgls@xxxxxxx
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
