From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
We have snd_soc_dai/dai_stream/component_active() macro
This patch uses it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
v1 -> v2
- adjust to latest patch-set
sound/soc/fsl/fsl_esai.c | 2 +-
sound/soc/fsl/fsl_spdif.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 84290be778f0..edcf4036697c 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -488,7 +488,7 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
{
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
- if (!dai->active) {
+ if (!snd_soc_dai_active(dai)) {
/* Set synchronous mode */
regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR,
ESAI_SAICR_SYNC, esai_priv->synchronous ?
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index c711d2d93280..1b2e516f9162 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -466,7 +466,7 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream,
int ret;
/* Reset module and interrupts only for first initialization */
- if (!cpu_dai->active) {
+ if (!snd_soc_dai_active(cpu_dai)) {
ret = clk_prepare_enable(spdif_priv->coreclk);
if (ret) {
dev_err(&pdev->dev, "failed to enable core clock\n");
@@ -554,7 +554,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
/* Power down SPDIF module only if tx&rx are both inactive */
- if (!cpu_dai->active) {
+ if (!snd_soc_dai_active(cpu_dai)) {
spdif_intr_status_clear(spdif_priv);
regmap_update_bits(regmap, REG_SPDIF_SCR,
SCR_LOW_POWER, SCR_LOW_POWER);
--
2.17.1
