The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>). Reported-by: Jonathan Bakker <xc-racer2@xxxxxxx> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- .../devicetree/bindings/sound/wm8994.txt | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index 68cccc4653ba..367b58ce1bb9 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -14,9 +14,15 @@ Required properties: - #gpio-cells : Must be 2. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply, - SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered - in Documentation/devicetree/bindings/regulator/regulator.txt + - power supplies for the device, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt, depending + on compatible: + - for wlf,wm1811 and wlf,wm8958: + AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, + DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply + - for wlf,wm8994: + AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply, + SPKVDD1-supply, SPKVDD2-supply Optional properties: @@ -73,11 +79,11 @@ wm8994: codec@1a { lineout1-se; + AVDD1-supply = <®ulator>; AVDD2-supply = <®ulator>; CPVDD-supply = <®ulator>; - DBVDD1-supply = <®ulator>; - DBVDD2-supply = <®ulator>; - DBVDD3-supply = <®ulator>; + DBVDD-supply = <®ulator>; + DCVDD-supply = <®ulator>; SPKVDD1-supply = <®ulator>; SPKVDD2-supply = <®ulator>; }; -- 2.17.1