At Mon, 19 Nov 2007 16:21:39 +0100,
Federico Fuga wrote:
>
> Hi,
>
> Maybe I am a little bit off-topic here, but I think this question may be related with a bug (maybe not in the alsa library, but I am a little confused now), so I apologize in advance.
> I am building a uclibc-based system on arm board.
> I have compiled the library 1.0.14a with uClibc 0.9.29 and kernel
> 2.6.23.1 / kernel headers 2.6.22.
> Settings the config params of mixer with "alsactl restore" fails with
> an "inappropriate ioctl for device" error:
>
> # alsactl restore
> alsactl: set_control:1159: Cannot write control '2:0:0:Speaker Playback
> Volume:0' : Inappropriate ioctl for device
>
> while traceing with strace I see that:
>
> open("/usr/lib/libasound.so.2", O_RDONLY) = 4
> fstat(4, {st_mode=S_IFREG|0755, st_size=716844, ...}) = 0
> close(4) = 0
> open("/dev/snd/controlC0", O_RDONLY) = 4
> close(4) = 0
> open("/dev/snd/controlC0", O_RDWR) = 4
> ioctl(4, USBDEVFS_CONTROL, 0xbeab09ec) = 0
> ioctl(4, UI_DEV_CREATE, 0xbeab0ad0) = 0
> ioctl(4, USBDEVFS_CONNECTINFO, 0xbeab0654) = 0
> ioctl(4, USBDEVFS_HUB_PORTINFO, 0xbeab0768) = -1 ENOTTY (Inappropriate
Looks like the definition of SNDRV_CTL_ICOTL_ELEM_WRITE doesn't match
with the user-space and the kernel, most likely the size of struct
snd_ctl_elem_value. This might be a word alignment issue.
Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
