Using a Canon Lake machine with the SOF driver causes dmesg to fill up with a ton of these messages: [ 275.902194] sof-audio-pci 0000:00:1f.3: firmware boot complete [ 351.529358] sof-audio-pci 0000:00:1f.3: firmware boot complete [ 560.049047] sof-audio-pci 0000:00:1f.3: firmware boot complete etc. Since the DSP is powered down when not in used this happens everytime e.g. a notification plays, polluting dmesg. Turn this messages into a debug message, matching what the code already does for the ""booting DSP firmware" message. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- sound/soc/sof/loader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sof/loader.c b/sound/soc/sof/loader.c index fc4ab51bacf4..4760a9734585 100644 --- a/sound/soc/sof/loader.c +++ b/sound/soc/sof/loader.c @@ -603,7 +603,7 @@ int snd_sof_run_firmware(struct snd_sof_dev *sdev) } if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) - dev_info(sdev->dev, "firmware boot complete\n"); + dev_dbg(sdev->dev, "firmware boot complete\n"); else return -EIO; /* FW boots but fw_ready op failed */ -- 2.26.0
