Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: 4865bde187b2 ("ASoC: Intel: bdw-rt5677: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@xxxxxxxxx>
---
sound/soc/intel/boards/bdw-rt5677.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c
index 713ef48b36a8..bfcdff747b3b 100644
--- a/sound/soc/intel/boards/bdw-rt5677.c
+++ b/sound/soc/intel/boards/bdw-rt5677.c
@@ -298,9 +298,6 @@ SND_SOC_DAILINK_DEF(be,
#if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
SND_SOC_DAILINK_DEF(ssp0_port,
DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
-#else
-SND_SOC_DAILINK_DEF(ssp0_port,
- DAILINK_COMP_ARRAY(COMP_DUMMY()));
#endif
/* Wake on voice interface */
@@ -349,7 +346,11 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = {
.dpcm_playback = 1,
.dpcm_capture = 1,
.init = bdw_rt5677_init,
+#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
+ SND_SOC_DAILINK_REG(dummy, be, dummy),
+#else
SND_SOC_DAILINK_REG(ssp0_port, be, platform),
+#endif
},
};
--
2.17.1
