According to the tas2562 datasheet,the bits[5:1] represents the amp_level value.
So to set the amp_level value correctly,the shift value should be set to 1.
Signed-off-by: Jonghwan Choi <charlie.jh@xxxxxxxxxxxxx>
---
sound/soc/codecs/tas2562.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c
index be52886a5edb..fb2233ca9103 100644
--- a/sound/soc/codecs/tas2562.c
+++ b/sound/soc/codecs/tas2562.c
@@ -409,7 +409,7 @@ static const struct snd_kcontrol_new vsense_switch =
1, 1);
static const struct snd_kcontrol_new tas2562_snd_controls[] = {
- SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 0, 0x1c, 0,
+ SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 1, 0x1c, 0,
tas2562_dac_tlv),
};
--
2.17.1
