Hi Srinivas,
> My recommendation would be to add a DisCo property stating the
WordLength value can be used by the bus code but not written to the
Slave device registers.
Does something like "mipi-sdw-read-only-wordlength" as slave property,
make sense?
The properties can be handled at two levels.
First, you'd want to change include/linux/soundwire/sdw.h, and add a new
field in
struct sdw_dpn_prop {
u32 num;
u32 max_word;
u32 min_word;
u32 num_words;
u32 *words;
+ bool read_only_wordlength;
Once this is added, along with the code that bypasses the programming of
DPn_BlockCtrl1, the implementation has two choices:
a) hard-code the field value in the codec driver.
b) read the property from firmware with the DisCo helpers.
There is no requirement that all properties be read from firmware, and
if you look at existing code base sdw_slave_read_prop() is currently
unused, each codec implements its own .read_prop() callback.
We really wanted to be pragmatic, and give the possibility to either
override bad firmware or extend incomplete firmware to avoid coupling OS
and firmware too much. If you foresee cases where this implementation
might vary and firmware distribution is not a problem, then a property
read would make sense.
Just once procedural reminder that all 'mipi-sdw' properties are handled
by the MIPI software WG, so we'd need to have this property added in a
formal MIPI document update.
I suggest you talk with Lior first on this.
Hope this helps
-Pierre
