Skylake driver does the controller init operation twice:
- first during probe (only to stop it just before scheduling probe_work)
- and during said probe_work where the actual correct sequence is
executed
To properly complete boot sequence when iDisp codec is present, bus
initialization has to be called only after _i915_init() finishes.
With additional _reset_list preceding _i915_init(), iDisp codec never
gets the chance to enumerate on the link. Remove the superfluous
initialization to address the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@xxxxxxxxx>
---
sound/soc/intel/skylake/skl.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f755ca2484cf..d66231525356 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -803,6 +803,9 @@ static void skl_probe_work(struct work_struct *work)
return;
}
+ skl_init_pci(skl);
+ skl_dum_set(bus);
+
err = skl_init_chip(bus, true);
if (err < 0) {
dev_err(bus->dev, "Init chip failed with err: %d\n", err);
@@ -918,8 +921,6 @@ static int skl_first_init(struct hdac_bus *bus)
return -ENXIO;
}
- snd_hdac_bus_reset_link(bus, true);
-
snd_hdac_bus_parse_capabilities(bus);
/* check if PPCAP exists */
@@ -967,11 +968,7 @@ static int skl_first_init(struct hdac_bus *bus)
if (err < 0)
return err;
- /* initialize chip */
- skl_init_pci(skl);
- skl_dum_set(bus);
-
- return skl_init_chip(bus, true);
+ return 0;
}
static int skl_probe(struct pci_dev *pci,
@@ -1064,8 +1061,6 @@ static int skl_probe(struct pci_dev *pci,
if (bus->mlcap)
snd_hdac_ext_bus_get_ml_capabilities(bus);
- snd_hdac_bus_stop_chip(bus);
-
/* create device for soc dmic */
err = skl_dmic_device_register(skl);
if (err < 0) {
--
2.17.1
